Tycon Systems 6 Port L2+ Manageable GigE Ind PoE Netwrk Switch, 4x 802.3bt PoE + 2x SFP/LC Fiber, 46-57VDC Wire Term IN, -40 to +80C, TP-SW4GBT-2SFP
Technical specs:
- Ethernet Transmission Speed: 1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation
- Fiber Transceiver Compatibility: 155M / 1.25G / 2.5G Multi Mode or Single Mode
- Connections: Shielded RJ45, Shielded SFP/LC, Grounded to Case
- Power Input: Vin 48VDC to 57VDC on Dual Input Wire Terminal (Max wire size 12AWG)
- Self Consumption:< 5 watts typical
- PoE Protections: Over Voltage, Over Current, Short Circuit
- PoE Pinout: 802.3af/at Ports = 1/2 V-; 3/6 V+ 802.3bt Ports = 1/2,7/8 V-; 3/6,4/5 V+
- Surge Protection: 6KV Normal Mode, 2KV Differential Mode
- ESD Protection: 15KV Air, 8KV Touch
- Management Methods: WEB, CLI, TELNET, SSH, SNMP
- VLANS: Supports up to 4K VLANs simultaneously (out of 4096 VLAN IDs); Port-based VLAN; 802.1Q tag-based VLAN
- Enable/Disable Port
- Speed
- Duplex
- MTU Setting
- Flow Control
- Mirroring
- In/Out Direction
- Speed Limit
- Isolation Settings
- Unknown Unicast/Multicast/Broadcast Storm Suppression
- STP: Standard Spanning Tree (STP) 802.1d Rapid Spanning Tree (RSTP) 802.1w Multiple Spanning Tree (MSTP) 802.1s
- Ring Network Protocol: ERPS (Ethernet Ring Protection Switching)
- Link Aggregation: Static/Manual Aggregation, LACP Dynamic Convergence
- IGMP v1/v2/v3 snooping: IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups
- MAC Management: Add/Delete, MAC Address learning limit, Dynamic Aging Time Setting
- Layer 3 Switching Functions: Virtual VLAN Interface, ARP, Static Router
- ACL (Access Control List): Based on source MAC, destination MAC, prototcol type, source IP, destination IP, L4 port number
- QOS (Quality of Service): 802.1p(COS) Classification, DSCP Classification, Source IP/Destination IP/Port Number Classification
- Anti-Attack Support: DOS Defense CPU Protection, limit message send rate ARP Binding (IP, MAC, PORT)
- LLDP
- Add/Delete Users
- Log user login/operation/status/events
- Port security (Dying Gasp/SNMP Trap)
- Device Reset
- Configuration save/restore
- NTP time setting
- Upgrade Management
- Jumbo Frame Support: 9.6K
- Forwarding Mode: Store and Forward
- Package Cache: 4M
- RAM / Flash: 128MB / 16MB
- Address Table: 8K MAC, self-learning
- IEEE 802.3i 10BASET
- 802.3u 100BASET
- 802.3z 1000BASET
- 802.3x Flow Control
- 802.3ab Gigabit Media Independent Interface (GMII)
- 802.1q VLANs
- 802.1p (QOS)
- 802.3ad Link Aggregation Control Protocol (LACP)
- 802.3af /at /bt (PoE)
- 802.3az Energy-Saving IEEE
- G.8032 Ethernet ring protection (<50ms) (STP)
- 802.1d, (RSTP)
- 802.1w, (MSTP)
- 802.1s
- EMI: FCC Part 15
- CISPR (EN55032) class A
- EMS: EN61000-4-2 (ESD)
- EN61000-4-4 (EFT)
- EN-61000-4-5 (Surge)
- Shock: IEC 60068-2-27
- Free Fall: IEC 60068-2-32
- Vibration: IEC 60068-2-6
- Environmental Protection: IP40
- Operating Temp: -40 to +85°C (-40 to 185°F)
- Operating Humidity (RH): 5% - 95% (non condensing)
- Storage Temperature: -40 to +85°C (-40 to +185°F)
- MTBF: 100,000 hours
- Certifications: CE, FCC, RoHS
- Warranty: 5 Years
Port Management
Other Functions
Network Protocols and Standards Summary
Other Industry Standards
Tycon Systems 6 Port L2+ Manageable GigE Ind PoE Netwrk Switch, 4x 802.3bt PoE + 2x SFP/LC Fiber,...more
Tycon Systems 6 Port L2+ Manageable GigE Ind PoE Netwrk Switch, 4x 802.3bt PoE + 2x SFP/LC Fiber, 46-57VDC Wire Term IN, -40 to +80C, TP-SW4GBT-2SFP, 810017123377
Features
The switch features security protocols like SSH and SSL for secure access of the switch command interface. The interface can be accessed via the serial console port or any of the Ethernet ports. The command interface can be controlled via web browser, command line interface(CLI), TELNET, SSH or SNMP.
With L2+ features, the switches provide better manageability, security, QOS features and performance. VLAN, Port Mirroring, Port Isolation, IGMP Snooping, DHCP Snooping, LLDP, ARP Inspection, Storm Control, IP Source Guard, Access Control Lists, PoE++ management are just some of the features available with this Industrial PoE Switch.
Spanning Tree, Jumbo Frames, Cable diagnostics, Ring Topology are also supported.
The switches are compatible with Green Ethernet standards. The switch can automatically power down the port Ethernet drivers when a link is not active. Active mode is resumed without loss of any packets when the switch detects the link is active. The switches also automatically adjust the signal strength depending on cable length to save power.
The switches require a 48VDC to 57VDC input on the dual input wire - terminal connector which is capable of accepting up to 12AWG wire.
The units are compatible with Category 5 or higher Ethernet cables with network distances up to 100m. The optical range for fiber ports is up to 120Km. The RJ45 connectors are shielded and grounded to the case. The units have surge protection on all ports and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.
Features
- Industrial Strength -40C - +80C Operating Temp
- 4 PoE++ (802.3bt 90W) and 2 fiber (SFP) Ports
- 10/100/1000 Gig Compatible
- Manageable via Console Port or IP
- Surge Protected Voltage/Ethernet Inputs
- Integrated DIN Rail Mount
- I.T.E. Power Supply, UL Listed
- Outdoor/Factory Network Installs
- Cameras/Wireless Radios
- PoE Lighting Applications
The switch features security protocols like SSH and SSL for secure access of the switch command interface. The interface can be accessed via the serial console port or any of the Ethernet ports. The command interface can be controlled via web browser, command line interface(CLI), TELNET, SSH or SNMP.
With L2+ features, the switches provide better manageability, security, QOS features and performance. VLAN, Port Mirroring, Port Isolation, IGMP Snooping, DHCP Snooping, LLDP, ARP Inspection, Storm Control, IP Source Guard, Access Control Lists, PoE++ management are just some of the features available with this Industrial PoE Switch.
Spanning Tree, Jumbo Frames, Cable diagnostics, Ring Topology are also supported.
The switches are compatible with Green Ethernet standards. The switch can automatically power down the port Ethernet drivers when a link is not active. Active mode is resumed without loss of any packets when the switch detects the link is active. The switches also automatically adjust the signal strength depending on cable length to save power.
The switches require a 48VDC to 57VDC input on the dual input wire - terminal connector which is capable of accepting up to 12AWG wire.
The units are compatible with Category 5 or higher Ethernet cables with network distances up to 100m. The optical range for fiber ports is up to 120Km. The RJ45 connectors are shielded and grounded to the case. The units have surge protection on all ports and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
TY-43
You will receive your personal $15 voucher with your order confirmation
Spend over $200 and get a $15 voucher for your next order
$15
$349.03 *
$885.83 *
(60.6% Saved)
Free shipping!
Delivery time 3-5 business days
Ports:
Secure payment
Tycon Systems 6 Port L2+ Manageable GigE Ind PoE Netwrk Switch, 4x 802.3bt PoE + 2x SFP/LC Fiber, 46-57VDC Wire Term IN, -40 to +80C, TP-SW4GBT-2SFP
Add this item and enjoy fast shipping
Popular product! About people already have it in their shopping cart
Free SHIPPING - Directly from the manufacturer!
Top seller in the store!
Proven product
Top international brands already trust us!
Secure shopping
- Free shipping from $50
- Fast delivery
- Your personal buyer protection
| Manufacturer: |
Tycon Systems
|
| Supplier number: | TP-SW4GBT-2SFP |
| UPC: | 810017123377 |
Technical specs:
- Ethernet Transmission Speed: 1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation
- Fiber Transceiver Compatibility: 155M / 1.25G / 2.5G Multi Mode or Single Mode
- Connections: Shielded RJ45, Shielded SFP/LC, Grounded to Case
- Power Input: Vin 48VDC to 57VDC on Dual Input Wire Terminal (Max wire size 12AWG)
- Self Consumption:< 5 watts typical
- PoE Protections: Over Voltage, Over Current, Short Circuit
- PoE Pinout: 802.3af/at Ports = 1/2 V-; 3/6 V+ 802.3bt Ports = 1/2,7/8 V-; 3/6,4/5 V+
- Surge Protection: 6KV Normal Mode, 2KV Differential Mode
- ESD Protection: 15KV Air, 8KV Touch
- Management Methods: WEB, CLI, TELNET, SSH, SNMP
- VLANS: Supports up to 4K VLANs simultaneously (out of 4096 VLAN IDs); Port-based VLAN; 802.1Q tag-based VLAN
- Enable/Disable Port
- Speed
- Duplex
- MTU Setting
- Flow Control
- Mirroring
- In/Out Direction
- Speed Limit
- Isolation Settings
- Unknown Unicast/Multicast/Broadcast Storm Suppression
- STP: Standard Spanning Tree (STP) 802.1d Rapid Spanning Tree (RSTP) 802.1w Multiple Spanning Tree (MSTP) 802.1s
- Ring Network Protocol: ERPS (Ethernet Ring Protection Switching)
- Link Aggregation: Static/Manual Aggregation, LACP Dynamic Convergence
- IGMP v1/v2/v3 snooping: IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups
- MAC Management: Add/Delete, MAC Address learning limit, Dynamic Aging Time Setting
- Layer 3 Switching Functions: Virtual VLAN Interface, ARP, Static Router
- ACL (Access Control List): Based on source MAC, destination MAC, prototcol type, source IP, destination IP, L4 port number
- QOS (Quality of Service): 802.1p(COS) Classification, DSCP Classification, Source IP/Destination IP/Port Number Classification
- Anti-Attack Support: DOS Defense CPU Protection, limit message send rate ARP Binding (IP, MAC, PORT)
- LLDP
- Add/Delete Users
- Log user login/operation/status/events
- Port security (Dying Gasp/SNMP Trap)
- Device Reset
- Configuration save/restore
- NTP time setting
- Upgrade Management
- Jumbo Frame Support: 9.6K
- Forwarding Mode: Store and Forward
- Package Cache: 4M
- RAM / Flash: 128MB / 16MB
- Address Table: 8K MAC, self-learning
- IEEE 802.3i 10BASET
- 802.3u 100BASET
- 802.3z 1000BASET
- 802.3x Flow Control
- 802.3ab Gigabit Media Independent Interface (GMII)
- 802.1q VLANs
- 802.1p (QOS)
- 802.3ad Link Aggregation Control Protocol (LACP)
- 802.3af /at /bt (PoE)
- 802.3az Energy-Saving IEEE
- G.8032 Ethernet ring protection (<50ms) (STP)
- 802.1d, (RSTP)
- 802.1w, (MSTP)
- 802.1s
- EMI: FCC Part 15
- CISPR (EN55032) class A
- EMS: EN61000-4-2 (ESD)
- EN61000-4-4 (EFT)
- EN-61000-4-5 (Surge)
- Shock: IEC 60068-2-27
- Free Fall: IEC 60068-2-32
- Vibration: IEC 60068-2-6
- Environmental Protection: IP40
- Operating Temp: -40 to +85°C (-40 to 185°F)
- Operating Humidity (RH): 5% - 95% (non condensing)
- Storage Temperature: -40 to +85°C (-40 to +185°F)
- MTBF: 100,000 hours
- Certifications: CE, FCC, RoHS
- Warranty: 5 Years
Port Management
Other Functions
Network Protocols and Standards Summary
Other Industry Standards
Tycon Systems 6 Port L2+ Manageable GigE Ind PoE Netwrk Switch, 4x 802.3bt PoE + 2x SFP/LC Fiber,...more
Tycon Systems 6 Port L2+ Manageable GigE Ind PoE Netwrk Switch, 4x 802.3bt PoE + 2x SFP/LC Fiber, 46-57VDC Wire Term IN, -40 to +80C, TP-SW4GBT-2SFP, 810017123377
Features
The switch features security protocols like SSH and SSL for secure access of the switch command interface. The interface can be accessed via the serial console port or any of the Ethernet ports. The command interface can be controlled via web browser, command line interface(CLI), TELNET, SSH or SNMP.
With L2+ features, the switches provide better manageability, security, QOS features and performance. VLAN, Port Mirroring, Port Isolation, IGMP Snooping, DHCP Snooping, LLDP, ARP Inspection, Storm Control, IP Source Guard, Access Control Lists, PoE++ management are just some of the features available with this Industrial PoE Switch.
Spanning Tree, Jumbo Frames, Cable diagnostics, Ring Topology are also supported.
The switches are compatible with Green Ethernet standards. The switch can automatically power down the port Ethernet drivers when a link is not active. Active mode is resumed without loss of any packets when the switch detects the link is active. The switches also automatically adjust the signal strength depending on cable length to save power.
The switches require a 48VDC to 57VDC input on the dual input wire - terminal connector which is capable of accepting up to 12AWG wire.
The units are compatible with Category 5 or higher Ethernet cables with network distances up to 100m. The optical range for fiber ports is up to 120Km. The RJ45 connectors are shielded and grounded to the case. The units have surge protection on all ports and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.
Features
- Industrial Strength -40C - +80C Operating Temp
- 4 PoE++ (802.3bt 90W) and 2 fiber (SFP) Ports
- 10/100/1000 Gig Compatible
- Manageable via Console Port or IP
- Surge Protected Voltage/Ethernet Inputs
- Integrated DIN Rail Mount
- I.T.E. Power Supply, UL Listed
- Outdoor/Factory Network Installs
- Cameras/Wireless Radios
- PoE Lighting Applications
The switch features security protocols like SSH and SSL for secure access of the switch command interface. The interface can be accessed via the serial console port or any of the Ethernet ports. The command interface can be controlled via web browser, command line interface(CLI), TELNET, SSH or SNMP.
With L2+ features, the switches provide better manageability, security, QOS features and performance. VLAN, Port Mirroring, Port Isolation, IGMP Snooping, DHCP Snooping, LLDP, ARP Inspection, Storm Control, IP Source Guard, Access Control Lists, PoE++ management are just some of the features available with this Industrial PoE Switch.
Spanning Tree, Jumbo Frames, Cable diagnostics, Ring Topology are also supported.
The switches are compatible with Green Ethernet standards. The switch can automatically power down the port Ethernet drivers when a link is not active. Active mode is resumed without loss of any packets when the switch detects the link is active. The switches also automatically adjust the signal strength depending on cable length to save power.
The switches require a 48VDC to 57VDC input on the dual input wire - terminal connector which is capable of accepting up to 12AWG wire.
The units are compatible with Category 5 or higher Ethernet cables with network distances up to 100m. The optical range for fiber ports is up to 120Km. The RJ45 connectors are shielded and grounded to the case. The units have surge protection on all ports and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
Questions about the article
Your question:
Personal data:
Continue shopping
TP-SW4GBT-2SFP
