Manufacturer: |
Tycon Systems
|
Supplier number: | TP-SW5G-D-BT |
UPC: | 810017123438 |
Technical specs:
- Port 1-4: 802.3bt 90W per port, supports 2 or 4 pair power
- Port 5: UPLINK 802.3bt Compatible PoE Input to 70W
- Transmission Speed: 1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation
- Data/PoE Connections: Shielded RJ45, Grounded to FG connection
- Input Voltage: Vin 53VDC to 57VDC on Wire Terminal or 802.3bt PoE on port 5 44-57V OK if powering 802.3af devices 50-57V OK if powering 802.3at devices
- Note: Input power (watts) must be higher than total PoE power out (watts)
- PoE Protections: Over Temperature, Over Current, Short Circuit
- Surge Protection: IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC61000-4-4 (EFT) 40A (5/50ns)
- Self Consumption:< 5 Watt Typical
- Switch Technology: Store and Forward, automatic MDI/MDI-X crossover
- Protocol: CSMA/CD
- Flow Control: IEEE802.3x(full-duplex), Back Pressure(half-duplex)
- Data Transmission Rate: 1488000pps, 148800pps, 14880pps; Automatic speed and duplex sensing
- Address Table: 2K MAC, self-learning
- Operating Temp: -30 to +70°C (-22 to 158°F)
- Operating Humidity (RH): 5% - 90% (non condensing)
- Storage Temperature: -40 to +85°C (-40 to +185°F)
- Dimensions (LxWxH): 159 x 118 x 40mm (6.3 x 4.6 x 1.6")
- Weight: 318g (11oz)
- Warranty: 3 Years
Tycon Systems 5 Port 360W Gigabit 802.3bt PoE Switch, 802.3bt 90W Output on 4 ports, 53-57VDC...more
Tycon Systems 5 Port 360W Gigabit 802.3bt PoE Switch, 802.3bt 90W Output on 4 ports, 53-57VDC wire term IN, Uplink port accepts 802.3bt 70W, TP-SW5G-D-BT, 810017123438
Features
The switch can accept power via two different interfaces: Wire Terminal Connector (10A, approx 500W Max) or via 802.3bt PoE input to Uplink Port 5 (70W Max). Two different power inputs can be used for redundancy. The higher voltage takes priority.
The RJ45 connectors are shielded and grounded to the common FG" (Frame Ground) connection. The units have 15kV surge protection on all Ethernet wires and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.
Features
- Mulitple Power Inputs: 802.3bt PoE to Port 5, Wire Terminal
- Gigabit Compatible
- Built-in Surge Protection
- Automatic MDI/MDI-X Crossover
- Automatic Speed and Duplex Sensing
- Low Self Power and High Temperature Operation
- DIN Rail Adapters included
- Power 4 802.3af/at devices from an 802.3bt (70W) PoE Input
- Power 4 802.3bt (up to 90W) from a wire terminal input
- Remote or Local Power for Cameras and Wireless Radios
- Also Functions as Ethernet/PoE repeater
- PoE Lighting Applications
The switch can accept power via two different interfaces: Wire Terminal Connector (10A, approx 500W Max) or via 802.3bt PoE input to Uplink Port 5 (70W Max). Two different power inputs can be used for redundancy. The higher voltage takes priority.
The RJ45 connectors are shielded and grounded to the common FG" (Frame Ground) connection. The units have 15kV surge protection on all Ethernet wires and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
TY-48
You will receive your personal $15 voucher with your order confirmation
Spend over $200 and get a $15 voucher for your next order
$15
$328.27 *
$839.05 *
(60.88% Saved)
Free shipping!
Delivery time 3-5 business days
Secure payment
Tycon Systems 5 Port 360W Gigabit 802.3bt PoE Switch, 802.3bt 90W Output on 4 ports, 53-57VDC wire term IN, Uplink port accepts 802.3bt 70W, TP-SW5G-D-BT
Add this item and enjoy fast shipping
Popular product! About people already have it in their shopping cart
Free SHIPPING - Directly from the manufacturer!
Top seller in the store!
Also order the matching accessories
Tycon Systems 8 x 5x1.75 inch ABS Outdoor Enclosure for TP-SW 5 port and 8 port PoE switches, 6 wire feedthru, ENC-SW-8x5
Tycon Systems |
ENC-SW-8x5
-60%
$174.19
*
$69.12
*
Show more accessories ()
Hide other accessories
Proven product
Top international brands already trust us!
Manufacturer: |
Tycon Systems
|
Supplier number: | TP-SW5G-D-BT |
UPC: | 810017123438 |
Technical specs:
- Port 1-4: 802.3bt 90W per port, supports 2 or 4 pair power
- Port 5: UPLINK 802.3bt Compatible PoE Input to 70W
- Transmission Speed: 1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation
- Data/PoE Connections: Shielded RJ45, Grounded to FG connection
- Input Voltage: Vin 53VDC to 57VDC on Wire Terminal or 802.3bt PoE on port 5 44-57V OK if powering 802.3af devices 50-57V OK if powering 802.3at devices
- Note: Input power (watts) must be higher than total PoE power out (watts)
- PoE Protections: Over Temperature, Over Current, Short Circuit
- Surge Protection: IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC61000-4-4 (EFT) 40A (5/50ns)
- Self Consumption:< 5 Watt Typical
- Switch Technology: Store and Forward, automatic MDI/MDI-X crossover
- Protocol: CSMA/CD
- Flow Control: IEEE802.3x(full-duplex), Back Pressure(half-duplex)
- Data Transmission Rate: 1488000pps, 148800pps, 14880pps; Automatic speed and duplex sensing
- Address Table: 2K MAC, self-learning
- Operating Temp: -30 to +70°C (-22 to 158°F)
- Operating Humidity (RH): 5% - 90% (non condensing)
- Storage Temperature: -40 to +85°C (-40 to +185°F)
- Dimensions (LxWxH): 159 x 118 x 40mm (6.3 x 4.6 x 1.6")
- Weight: 318g (11oz)
- Warranty: 3 Years
Tycon Systems 5 Port 360W Gigabit 802.3bt PoE Switch, 802.3bt 90W Output on 4 ports, 53-57VDC...more
Tycon Systems 5 Port 360W Gigabit 802.3bt PoE Switch, 802.3bt 90W Output on 4 ports, 53-57VDC wire term IN, Uplink port accepts 802.3bt 70W, TP-SW5G-D-BT, 810017123438
Features
The switch can accept power via two different interfaces: Wire Terminal Connector (10A, approx 500W Max) or via 802.3bt PoE input to Uplink Port 5 (70W Max). Two different power inputs can be used for redundancy. The higher voltage takes priority.
The RJ45 connectors are shielded and grounded to the common FG" (Frame Ground) connection. The units have 15kV surge protection on all Ethernet wires and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.
Features
- Mulitple Power Inputs: 802.3bt PoE to Port 5, Wire Terminal
- Gigabit Compatible
- Built-in Surge Protection
- Automatic MDI/MDI-X Crossover
- Automatic Speed and Duplex Sensing
- Low Self Power and High Temperature Operation
- DIN Rail Adapters included
- Power 4 802.3af/at devices from an 802.3bt (70W) PoE Input
- Power 4 802.3bt (up to 90W) from a wire terminal input
- Remote or Local Power for Cameras and Wireless Radios
- Also Functions as Ethernet/PoE repeater
- PoE Lighting Applications
The switch can accept power via two different interfaces: Wire Terminal Connector (10A, approx 500W Max) or via 802.3bt PoE input to Uplink Port 5 (70W Max). Two different power inputs can be used for redundancy. The higher voltage takes priority.
The RJ45 connectors are shielded and grounded to the common FG" (Frame Ground) connection. The units have 15kV surge protection on all Ethernet wires and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
Also order the matching accessories
Tycon Systems 8 x 5x1.75 inch ABS Outdoor Enclosure for TP-SW 5 port and 8 port PoE switches, 6 wire feedthru, ENC-SW-8x5
Tycon Systems |
ENC-SW-8x5
-60%
$174.19
*
$69.12
*
Show more accessories ()
Hide other accessories
Questions about the article
Your question:
Personal data:
Continue shopping
TP-SW5G-D-BT