Tycon Systems RemotePro 2.5W Cont Remote Power System, 15W Solar, 12V 18Ah,12V 20A PWM Solar Charge Controller, Polycarbonate Enclosure, RPPL12-18-15FeaturesComplete Remote Power Solution for Off-Grid operationWeatherproof, UV resistant, outdoor enclosuresEnclosures can be Wall or Pole MountedHigh Performance Valve Regulated Sealed Lead Acid BatteriesAdvanced battery charge controller protects against overcharge and over dischargeApplicationsWireless Base Stations and ClientsSurveillance CamerasWireless Bridge and RepeatersRemote SensorsRemote LightingBackup Power SystemsThe RemotePro PL-SM series (RPPL) outdoor power systems are designed for applications that require a primary offgrid or backup power source to run various electronics. The sealed and weatherproof 11x7x6" Polycarbonate enclosures hold up to two 12V 9AH batteries. The enclosures are hinged and gasket sealed. They can accept a padlock or tamper seal.The enclosures can be mounted to a wall or pole with the included mounting bracket system.The high quality solar panels have a 25year power output guarantee. The 30W and 35W solar panels can be mounted to a 51mm to 101mm (2" to 4") diameter pole or alternately to a wall with the included bracket kit.Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid batteries. Some of the RPPL-SM systems include a controller with built in POE inserter and DCDC converter to supply 24V or 48V PoE from the 12V battery system. Other models use a 20A PWM controller with parametric LCD display. Enclosures have multiple ports for CAT5/6 cable, antenna cables/connectors or other cabling. Batteries are an Absorbed Glass Matt (AGM) type which have good all temperature, deep discharge performance.

Tycon Systems PoE Splitter GigE, 48VDC 802.3at PoE Input, 48V 802.3at Passthru PoE out and 24VDC 20W wire terminal output, Max 50W total, POE-SPLT-4824G-P, 810017120482FeaturesConverts PoE input to PoE and VDC outputGigabit Ethernet compatibleCombined Outputs up to 50W2 pair and 4 pair input compatiblePoE (24VDC output on wire terminal connection).Short Circuit, Over Current, Under Voltage and Over Voltage ProtectionHigh Temperature OperationI.T.E. Power Supply, UL ListedThe POE-SPLT-4824G-P is a unique Gigabit speed Power over Ethernet adapter which converts a 802.3af/at PoE input to an 802.3af/at PoE output plus a VDC output of 24VDC on a wire terminal connector.Inputs and outputs are isolated. They have various protections for short circuit, overload and over/under voltage. The splitters can be powered by an 802.3af PoE input if total output power is less than 15W. They can be powered by an 802.3at input if total output required is less than 30W. They can be powered by 48V Passive PoE if required output power is up to 50W. Input power should be 15% higher than required total output power.

Tycon Systems TPDIN PoE Powered Relay, 10A Normally Closed or Open Relay, TPDIN-POE-RELAY, 810017123292FeaturesPoE Powered, No Other External Power RequiredAccepts 802.3af/at/bt Class 0 PoE or 24V Passive PoENormally Open and Normally Closed 10A Relay ConnectionsGigabit Data Passthru with Surge ProtectionWide Operating Voltage Range: -40C to +70CDIN Rail MountingThe TPDIN-POE-RELAY is a unique device that provides a way to control up to 10A of current from a managed PoE Switch or other PoE device. When PoE is applied to the TPDIN-POE-RELAY, the relay closes and the LED turns ON. When PoE power is removed, the relay turns off and the LED turns OFF. There are two connections, a normally closed and a normally open, so that both relay logic states can be utilized.Many modern PoE switches allow an operator to enable or disable the PoE on a particular port. This PoE switch function can be used to control the relay.The unit features a Gigabit Data Passthrough with surge protection to protect the data connection up to 30KV.It mounts to a standard DIN Rail commonly used in industrial installations.

Tycon Systems RemotePro 8W Remote Power System, 36Ah Battery, 35W Solar, 12V 20A PWM Controller, Polycarbonate Enclosure, RPPL12-36-35FeaturesComplete Remote Power Solution for Off-Grid operationWeatherproof, UV resistant, outdoor enclosuresEnclosures can be Wall or Pole MountedHigh Performance Valve Regulated Sealed Lead Acid BatteriesAdvanced battery charge controller protects against overcharge and over dischargeApplicationsWireless Base Stations and ClientsSurveillance CamerasWireless Bridge and RepeatersRemote SensorsRemote LightingBackup Power SystemsThe RemotePro PL series (RPPL) outdoor power systems are designed for applications that require a primary off-grid power source to run various electronics. The sealed and weatherproof Polycarbonate enclosures hold up to four 12V 8.5AH batteries. The enclosures are hinged and gasket sealed. They can accept a padlock of tamper seal.The enclosures can be mounted to a wall or pole with the included mounting bracket system.The high quality solar panels have a 25year power output guarantee. The 30W solar panels can be mounted to a 51mm to 101mm (2" to 4") diameter pole or alternately to a wall with the included bracket kit.Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid batteries. Most of the RPPL systems include a controller with built in POE inserter and DCDC converter to supply 24V or 48V POE from the 12V or 24V battery system. Enclosures have multiple ports for CAT5/6 cable, antenna cables/connectors or other cabling. They are vented to prevent residual buildup of hydrogen gas.Batteries are an Advance Glass Matt (AGM) type which have good all temperature performance.

Tycon Systems RemotePro 8W Remote Power System, 36Ah Battery, 35W Solar, 12V PWM Controller, Polycarbonate Enclosure, 12V 40A output, RPPL12-36-35-PUMPFeaturesCapable of switching 40A with included relay to operate high startup current equipment like pumps and motors.Complete Remote Power Solution for Off-Grid operationWeatherproof, UV resistant, outdoor enclosuresEnclosures can be Wall or Pole MountedHigh Performance Valve Regulated Sealed Lead Acid BatteriesAdvanced battery charge controller protects against overcharge and over dischargeApplicationsFuel PumpsMotorsWater PumpsMotorized GatesRemote LightingBackup Power SystemsThe RemotePro RPPL12-36-35-PUMP outdoor remote Off-Grid power systems are specifically designed for applications that require a high current (up to 40A) intermittent power source such as pump and motorized equipment. The sealed and weatherproof glass filled Polycarbonate enclosures holds four batteries for a total of 12V 36Ah capacity. The enclosures are hinged and gasket sealed. They can accept a padlock or tamper seal.The enclosures can be mounted to a wall or pole with the included mounting bracket system.The high quality solar panels have a 25year power output guarantee. The 35W solar panels can be mounted to a 51mm to 101mm (2" to 4") diameter pole or alternately to a wall with the included bracket kit.Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid batteries. Enclosures have multiple ports for cables. They are vented to prevent residual buildup of hydrogen gas.Batteries are an Advance Glass Matt (AGM) type which have good all temperature deep discharge performance.

Tycon Systems 12V 9Ah AGM SLA Battery, F2 terminals, 5.94 x 2.56 x 3.9inch, TPBAT12-9, 810017121229FeaturesSealed and Maintenance FreeSafety Valve for Ultimate Safety; Prevents OverpressureGood Deep Discharge Recovery PerformanceLow Self Discharge CharacteristicsHighly Resistant to Vibration and ShockApplicationsRemote Equipment PowerSurveillance CamerasWireless Base StationsMedical EquipmentRemote SensorsBackup Power SystemsThe TPBAT12-9 high rate valve regulated sealed lead acid (VRLA) batteries have been developed for long term operation in harsh environments. The small battery uses absorbent glass mat (AGM) technology which provides for unsurpassed reliability over wide temperature ranges. The batteries can be installed in any position without affecting their performance or reliability. The combination of advanced electrode and electrolyte formulations provide higher power output than normal batteries of the same physical size. The TPBAT12-9 has F2 type .25" spade connectors.

Tycon Systems RemotePro 8W Power System, 36Ah Battery, 30W Solar, 24V PWM Controller 48V Passive PoE, Polycarbonate Enclosure, RPPL2448-36-30, 810017120734FeaturesComplete Remote Power Solution for Off-Grid operationWeatherproof, UV resistant, outdoor enclosuresEnclosures can be Wall or Pole MountedHigh Performance Valve Unregulated Sealed Lead Acid BatteriesAdvanced battery charge controller protects against overcharge and over dischargeApplicationsWireless Base Stations and ClientsSurveillance CamerasWireless Bridge and RepeatersRemote SensorsRemote LightingBackup Power SystemsThe RemotePro PL series (RPPL) outdoor power systems are designed for applications that require a primary off-grid power source to run various electronics. The sealed and weatherproof Polycarbonate enclosures hold up to four 12V 8.5AH batteries. The enclosures are hinged and gasket sealed. They can accept a padlock of tamper seal.The enclosures can be mounted to a wall or pole with the included mounting bracket system.The high quality solar panels have a 25 year power output guarantee. The 30W solar panels can be mounted to a 51mm to 101mm (2" to 4") diameter pole or alternately to a wall with the included bracket kit.Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve unregulated sealed lead acid batteries. Most of the RPPL systems include a controller with built in POE inserter and DCDC converter to supply 24V or 48V POE from the 12V or 24V battery system. Enclosures have multiple ports for CAT5/6 cable, antenna cables/connectors or other cabling. They are vented to prevent residual buildup of hydrogen gas.Batteries are an Advance Glass Matt (AGM) type which have good all temperature performance.

Tycon Systems BreezePro® 400W 12/24V AutoSelect HAWT Wind Turbine with integrated battery charge controller and dump load, TPW-400DT-12/24, 810017122523FeaturesIntegrated Controller with Dump Load to Optimize PerformanceWind Turbine startup wind speed of 2.1m/s (4.5mph)Smooth and quiet running maintenance free sealed turbineSealed die cast aluminum housing for protection from harsh environmentsVery light and compactEasy Installation and Maintenance Free OperationElectronic over-speed protectionApplicationsBattery Charging ApplicationsSurveillance CamerasWireless Base StationsElectric Gate Openers, Electric FencesStreet Lamps and SignsRemote Cabins and buildingsBoats, RV's and static caravansSecurity SystemsThe BreezePro Wind Turbines from Tycon Solar are lightweight at less than 10.5kg and are designed for ease of installation and long service life. The generator is a very low cogging force design for better performance in light winds and is packaged in a fully sealed die cast aluminum enclosure. There are no brushes to wear out or cause electrical noise and the bearings are sealed so the system is maintenance free. The blades are glass reinforced nylon for high strength, UV resistance and fatigue resistance. The turbines are 12V/24V auto voltage select. The unit includes an embedded smart battery charge controller and dump load resistor. The dump load helps prevent premature braking and increases the total power delivered to the batteries. It also helps protect the turbine in high winds. The entire blade assembly can be removed easily as 1 piece for hurricane protection. This also makes it easier and safer to install.The permanent magnets used are Neodymium Iron Boron (NdFeB) for higher power output.The mounting is to the inside of the top of a 41mm ID standard pole (1.5" Sched 40). The hardware used is stainless steel for corrosion protection. The units can be used in arrays of multiple turbines to increase available power.

Tycon Systems RemotePro 2.5W Remote Power System, 9Ah Battery, 15W Solar, 12V 20A PWM Controller, Die Cast Aluminum Enclosure, RPDC12-9-15, 810017120666FeaturesComplete Remote Power Solution for Off-Grid operationWeatherproof, UV resistant, outdoor enclosuresEnclosures can be Wall or Pole MountedHigh Performance Valve Regulated Sealed Lead Acid BatteriesAdvanced battery charge controller protects against overcharge and over dischargeApplicationsWireless Base Stations and ClientsSurveillance CamerasWireless Bridge and RepeatersRemote SensorsRemote LightingBackup Power SystemsThe RPDC RemotePro series outdoor power systems are designed for applications that require a primary off-grid power source to run various electronics.The die cast aluminum enclosures are hinged and gasket sealed. They can be mounted to a pole or wall with the included mounting bracket system.The high quality solar panels have a 25 year power output guarantee. They can be mounted to a pole or to a wall with the included bracket kit.Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid batteries. Enclosures are vented to prevent residual buildup of hydrogen gas.Batteries are an Absorbed Glass Matt (AGM) type which have good all temperature performance.

Tycon Systems PoE Splitter 48VDC 802.3af PoE input passthru RJ45 Socket output, 12VDC 15W output on 5.5x2.1mm DC connector, 6in cables, POE-MSPLT-4812P-F, 810017120383FeaturesVery Compact SizeDual Output: 48V Passive PoE and 48V, 24V or 12VDC OutputConverts an Active PoE Input to a DC outputOutput Power Up To 15WShort Circuit, Over Current ProtectionI.T.E. Power Supply, UL ListedThe POE-MSPLT-48xxP-F is a unique splitter with dual outputs. It accepts 802.3af or 802.3at PoE and provides 48V PoE and 48V or 24V or 12VDC outputs concurrently so two separate devices can be powered. The DC output is provided on a standard 5.5mm/2.1- 2.5mm barrel connector and the Data/PoE output is provided on standard RJ45 network connector, each on a 6" cable. The DC connector is compatible with Tycon passive PoE injectors like POE-INJ-1000-S for ease of integration. In addition to being compatible with 10/100MB Ethernet speeds, inputs and outputs are isolated and the devices include protections for short circuit and overload.

Tycon Systems 9-36VDC IN, 802.3af 48V 17W OUT, DC to DC Converter and 802.3af PoE injector, TP-DCDC-1248D, 810017121403FeaturesInput Voltage 9-36VDC; Output 48VDCIEEE 802.3af compliant modelDual Inputs for connecting 2 power sourcesIntegrated 10/100MB POE InserterHigh Power up to 17WShort Circuit, Over Current and Reverse/Over Voltage ProtectionHigh Temperature OperationCompact size Maximize Available SpaceI.T.E. Power Supply, UL ListedApplications12V / 24V Battery SystemsWireless Access Points and Client DevicesIP Phone and Security Camera SystemsPoE Lighting ApplicationsThe TP-DCDC-1248D Series of DC to DC converters offered by Tycon Power is a low cost and high reliability solution for those requiring 48VDC Power over Ethernet voltage from a 12 or 24V battery system. They have an integrated POE injector to apply the 48VDC to the CAT5/6 Ethernet cable. The output is regulated 48VDC from an input voltage between 9VDC and 36VDC.They have two common (-) and two (+) for connecting 2 power sources, such as a primary with a backup power source. They have various protections for surge, short circuit and overload. The input and output are isolated. A metal enclosure model is available for industrial applications.They accept data-in to a shielded RJ45 Jack and provide data-out and POE power on the shielded RJ45 output jack. They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-). Other IEEE 802.3af compliant model is available for those applications requiring 802.3af handshake. They have various protections for surge, short circuit and overload. The other models have power output up to 24W. The DCDC converters are DIN rail mountable using DIN Rail adaptors pn: DIN-ClipKit-UNI

Tycon Systems Network Lightning/Surge Protector, 10Gbps Data Rate, LAN/PoE 70V Clamp Voltage, 15KV, 10KA Surge, TP-ESP-10G-POE, 810017121724Features10/100/1,000/10,000Mb (10G) Data RateCAT5, CAT5e, CAT6, CAT6a Compatible.802.3af, 802.3at, 802.3bt and Passive PoE CompatiblePoE, PoE+ and PoE++ CompatibleShielded RJ45 Jacks and Full Metal HousingIndustrial strength operating range to 90COver-Current ProtectedComplies with IEC 61000-4-5 StandardUL497B ListedApplicationsWireless Access Points and Client DevicesIP Phone and Security Camera SystemsIndustrial Control SystemsThe TP-ESP-10G-POE are a high performance Ethernet surge protector to help protect sensitive equipment from surges caused by lightning and grid power fluctuations. They protect to an impressive 10KA and are compatible with up to 10Gbps Ethernet networks. The surge protectors are also compatible with IEEE802.3af/at/bt PoE standards.They have a full metal body for improved EMI suppression and have integral mounting feet and separate ground wire. Incorporating a rugged design, they are perfect for indoor or outdoor use inside a weatherproof enclosure. The TP-ESP-10G-POE is compatible with 10/100/1,000M/10,000M POE systems up to 58V and can also be used successfully in pure data systems without PoE . Common mode and Differential Mode Protection is provided on all 8 Ethernet wires.A ground wire is included to tie into the user's earth ground system. Surge protectors should be mounted as close to the protected equipment as is feasible. Tycon offers a small outdoor enclosure to weatherproof the surge protector. There is also a DIN rail mounting kit available for DIN rail mounting the surge protector.

Tycon Systems MC4 Male and Female Connector Pair with crimp contacts for up to 10AWG Wire, MC4-CONNKIT, 810017124015FeaturesMale and Female Connector PairRated for up to 1000VDCCrimp Connector for 10/12AWG WireIP67 Weatherproof RatingApplicationsRemote Power SystemsSolar Power ApplicationsThe Tycon Solar MC4-CONNKIT is an industry standard MC4 connector kit. It includes a male and a female connector with crimp contacts which can accommodate 10AWG and 12AWG wire. The IP67 UV Protected weatherproof connectors are designed for outdoor use in harsh environments.

Tycon Systems 18-36VDC IN, 56V 70W 802.3bt PoE OUT, DC to DC Converter and 5G 802.3bt PoE Injector, TP-DCDC-2456GD-BT, 810017122974FeaturesInput Voltage 18VDC to 36VDC8 wire (4 Pair) 56VDC 802.3bt PoE OutputHigh Power Output to 70WDual DC Inputs for Connecting 2 Power SourcesGigabit Data ThroughputLow Voltage Disconnect FeatureShort Circuit, Over Current and Reverse/Over Voltage ProtectionIndustrial Temperature Range -40 to 70CApplications24VDC Remote Power Systems48VDC or -48VDC Remote Power Systems802.3bt PoE 4 Pair Powered Cameras and Radio's802.3at PoE Powered DevicesThe Gigabit compatible TP-DCDC-2456GD-BT is 802.3at/bt compatible high power DC to DC converters/PoE inserters designed for operation in industrial environments. The inserter conforms to the new IEEE802.3bt Power Over Ethernet standards for industry compatibility. The PoE inserter supplies 56VDC PoE power on all 8 Ethernet wires (4 Pair). They are backward compatible with 802.3at so they will safely power 802.3at and 802.3af devices in addition to the new 802.3bt devices. The TP-DCDC-2456GD-BT is a low cost option for applications with 18-36VDC available. The input and output are isolated so they work in a negative ground or positive ground system. They have two DC inputs for connecting 2 power sources, like a primary and backup power source. They have various protections for low voltage, surge, short circuit and overload.

Tycon Systems 5 Port High Power (2A/port) PoE 10/100 Passive PoE switch, 12-56VDC IN, VIN=VOUT, TP-SSW5-NC, 810017122233FeaturesHigh Power 10/100 and 1000Mb PoE SwitchRemotely Power Equipment thru CAT5 Cable up to 100mUp to 2A per PortBuilt-in Surge ProtectionAutomatic MDI/MDI-X CrossoverAutomatic Speed and Duplex SensingCompact SizeHigh Temperature OperationCE and FCC CertificationI.T.E. Power Supply, UL ListedApplicationsWireless Access Points and Client DevicesIP Phone and Security Camera SystemsThe SW5 Series Power over Ethernet (PoE) switches offered by Tycon Power are fully automatic high speed 5 port Ethernet switches with up to 2A of PoE power per port.TP-SSW5-NC: Universal Voltage 10/100 PoE Switch. Switch accepts universal voltage (12-57VDC) via the wire terminal connector on the back of the Switch. This model is very compact at only 4"x5"x1.5". 2A per port.On the universal voltage models (-NC") the PoE output voltage = the input voltage so it is universal in its application. The Ethernet spec supports distances up to 100m (328 feet) between the PoE switch and the remote device.Tycon Power sells a variety of power supplies in 60W, 120W and 180W sizes. 18VDC, 24VDC and 48VDC are available. All the Switches have DIN Rail mounts included for convenient DIN rail mounting.

Tycon Systems RemotePro 150W Remote Power System, 720Ah Battery, 1440W Solar, 12/24/48V MPPT Controller, Ground Mount AL Enclosure, RPAL12/48M-720-720, 810017123926FeaturesComplete 720W Remote Power Solution for OffGrid Operation.Supports up to 157W continuous power with 6hrs peak sun.Weatherproof Outdoor Enclosures with 720Ah BatteryExpandable Ground Mounted Solar MountHigh Performance Sealed Lead Acid AGM BatteriesMPPT Solar Charge Controllers with RS485 InterfaceThermostatically Controlled VentilationApplicationsWireless Base StationsRemote LightingSurveillance CamerasWireless Bridge and RepeatersOff-Grid PowerBackup PowerThe RemotePro 720W Series outdoor power systems are designed for applications that require a primary off-grid power source to run various equipment. The vented weatherproof enclosures have generous space available inside for mounting customer equipment. Multiple mounting brackets are welded inside the enclosure for mounting DIN rails or flat plates.The systems are available with MPPT temperature compensated solar charge controllers with an RS485 interface for remote monitoring with a Tycon TPDIN-Monitor-WEB3 or TP-SC-WIFI adapter. The solar controllers turn off the load automatically if the battery voltage drops too low, in order to preserve battery life. The load turns on automatically once the battery voltage recovers.The outdoor enclosures are diamond plate aluminum ground mount. They are hinged and gasket sealed with locking closures. They have four cable gland ports for CAT5/6 cable, antenna cables/connectors or other cabling. Included is a thermostatically controlled fan assembly which turns on automatically when the temperature exceeds 45°C.The high quality solar panels have a 25 year power output guarantee and a +5W output tolerance.Batteries are a Non-Spillable Valve Regulated Sealed Lead Acid Absorbed Glass Matt (AGM) type which have excellent temperature and deep discharge performance. Expected battery life exceeds 5 years.The systems come with all cabling required to connect the batteries to the controller and 20'outdoor rated cable to connect the solar panels to the controller.The solar mount includes the concrete anchors that are necessary for mounting. Tilt adjustment range is 10-65 deg and can be adjusted by one person. The mount can be expanded to hold 4 panels (Kit # TPSM-350x4-AdapterKit) or 6 panels (Kit# TPSM-350x6-AdapterKit). This is useful if more solar capacity is needed in the future.

Tycon Systems TPDIN WEB3 Remote station monitor and control, Monitor 4 Voltages, 4 Currents and use 4 relays for power control, TPDIN-MONITOR-WEB3, 810017123285FeaturesRemotely Measure 4 Voltages, 4 Currents, 2 TemperaturesRemotely Control Equipment with 4 Relays: 2 NC and 2 NOInterfaces to Tycon MPPT Solar Controllers via Serial CableAutomatic Control of Relays by Volts, Amps, Temp, Ping, Time and MPPT DataAccess via Web or SNMP. Automatically Send Email AlertsOn-Board Datalogger and History GraphsAccepts power via PoE (802.3af or Passive) or wire terminalDIN Rail MountingThe TPDIN-Monitor-WEB3 Based Remote Monitor and Control System is a versatile tool which enables the equipment designer and installer to remotely monitor their equipment and site. The unit can be accessed via the network (web and SNMP) to remotely monitor up to 4 voltages, 4 currents, 2 temperatures and control power to various equipment using 4 on-board relays.In addition to the flexible interfaces mentioned above, the WEB3 interfaces with Tycon MPPT solar controllers using a single serial cable to read PV Volts, PV Amps, Battery Volts, Battery Amps, Battery Temperature, Load Volts and Load Amps from the MPPT solar controller. It also allows manual turn on/off of the MPPT solar controller load output via the web interface. This makes it very easy to monitor and control a remote power system remotely, log and graph the trends, send email alerts and control relay actions based on embedded sensor or MPPT data.The system has built-in surge protection to prevent damage from electrical surges.On board data-logging and graphing capabilities allow the user to see history of the various parameters being measured. The graphical interface allows the user to control relays via a single mouse click and monitor all the measurement parameters real-time via any web browser. The web interface allows access and control via desktops, laptops, tablets and smartphones. The Tycon APP for IOS and Android facilitates remote access.The system allows control of the relays based on Voltage, Current, Temperature, Time, Ping Watchdog and MPPT controller data. This provides almost unlimited flexibility.The relays have a special one-click cycle feature with programmable cycle times which can be used to turn a device off and then back on after the predetermined time with a single button click. This is useful for rebooting a device like a PoE Switch by power cycling it, thereby rebooting all devices attached to the switch. Relay CH1 and CH2 are Normally Closed type, Relay CH3 and CH4 are Normally Open type. Relays don't use any power when they are in their default position.Two of the current ports provide bi-directional current (+/-), showing direction of current flow. This is useful for monitoring batteries so you can see when the battery is charging and when it is discharging. One of these current ports supports external current shunts so very large currents can be monitored. The User Interface provides for quick calibration of external shunts by entering the shunt rated mV and Current.Connections are via removable wire terminal connectors. This allows for easy troubleshooting and maintenance because the unit can be removed from the system without disturbing the system wiring.User defined labels for each parameter makes sure that when viewing the web interface or graphs that users can quickly identify the parameter they are concerned about. An internal real time clock based on PC time or Internet time ensures that data logging is accurate. Each Monitor can also have a unique name to identify it on the network. This makes it easy to manage multiple units on a network.Each parameter has programmable +/- offsets to be able to perform field calibration to compensate for things such as line loss or variations in measuring equipment. This provides unsurpassed flexibility as each device can be tailored by the user to their specific needs.The unit can be setup to send emails of the present parameter readings based on a periodic time period or based on parameters exceeding programmable preset limits. Using SNMP allows the user to create a fully automated remote data collection and control system.A free discovery tool is available via download to assist in finding the Tycon units on the network. It works across different subnets. This is helpful if a user forgets the IP address of the unit or has the unit configured for DHCP client and he is unsure what IP address the unit is operating on.

Tycon Systems UPSPro 450W Outdoor Backup Power System, 200Ah Battery, 12/24V, Pole/Wall Mount Steel Enclosure, UPSTL12/24-200-600, 810017123032FeaturesWeatherproof (IP65), UV resistant, outdoor enclosuresPowered from AC mains power and/or SolarInterior space for customer electronicsWall or Pole MountingIsolates Customer Equipment from Power Line SurgesHigh Quality AGM Sealed Lead Acid BatteriesAdvanced battery charge controller protects against overcharge and over dischargeApplicationsWireless Base Stations and ClientsSurveillance CamerasWireless Bridge and RepeatersRemote SensorsMission critical outdoor powerBackup Power SystemsThe enclosure is powered from 120/240VAC. It is also solar ready so a solar panel can be added as an alternate power source or to extend backup time (TPSK Solar Kits).Features include an advanced manageable MPPT battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid AGM batteries. The charge controller displays battery level, charging current, temperature, and load current on its embedded LCD display. Charging parameters can be customized in the field if required.Enclosures have multiple ports for CAT5 cable, antenna cables/connectors or other cabling. They are vented to prevent residual buildup of hydrogen gas.There is some space inside the enclosures for customer electronics such as controllers, wireless AP or CPE cards, sensors, inverters, etc.Equipment runs on batt power which isolates it from power line surges which is a main cause of outdoor equipment failureSystems can be configured for 12/24V.These systems are ideal for powering security cameras 24/7 from lighting systems where grid power is only available at night. Additional AC inputs such as 277VAC or 480VAC can be adapted by using standard AC transformers. Consult your electrician.

Tycon Systems RemotePro 100W, 400Ah Batt, 720W Solar, 12/24V MPPT Controller, Pole/Wall Mount Steel Enclosure, RPSTL12/24M-400-720, 810017123704FeaturesComplete 720W Remote Power Solution for OffGrid Operation.Supports up to 157W continuous power with 6hrs peak sun.Weatherproof Outdoor Enclosures with up to 720Ah BatteryExpandable Ground Mounted Solar MountHigh Performance Sealed Lead Acid AGM BatteriesMPPT Solar Charge Controllers with RS485 InterfaceThermostatically Controlled VentilationApplicationsWireless Base StationsRemote LightingSurveillance CamerasWireless Bridge and RepeatersOff-Grid PowerBackup PowerThe RemotePro720W Series outdoor power systems are designed for applications that require a primary off-grid power source to run various equipment. The vented weatherproof enclosures have generous space available inside for mounting customer equipment. Multiple mounting brackets are welded inside the enclosure for mounting DIN rails or flat plates.The systems are available with MPPT temperature compensated solar charge controllers with an RS485 interface for remote monitoring with a Tycon TPDIN-Monitor-WEB3 or TP-SC-WIFI adapter. The solar controllers turn off the load automatically if the battery voltage drops too low, in order to preserve battery life. The load turns on automatically once the battery voltage recovers.The outdoor enclosures are powder coated steel pole mount or diamond plate aluminum ground mount. They are hinged and gasket sealed with locking closures. They have four cable gland ports for CAT5/6 cable, antenna cables/connectors or other cabling. Included is a thermostatically controlled fan assembly which turns on automatically when the temperature exceeds 45°C.The high quality solar panels have a 25 year power output guarantee and a +5W output tolerance.Batteries are a Non-Spillable Valve Regulated Sealed Lead Acid Advance Glass Matt (AGM) type which have excellent temperature and deep discharge performance. Expected battery life exceeds 5 years.The systems come with all cabling required to connect the batteries to the controller and 20'outdoor rated cable to connect the solar panels to the controller.The solar mount includes the concrete anchors that are necessary for mounting. Tilt adjustment range is 10-65 deg and can be adjusted by one person. The mount can be expanded to hold 4 panels (Kit # TPSM-350x4-AdapterKit) or 6 panels (Kit# TPSM-350x6-AdapterKit). This is useful if more solar capacity is needed in the future.

Tycon Systems Passive Y Injector Injects DC Power on RJ45 socket pins 4,5(+) and 7,8(-), Injects PoE power to RJ45 connectors, Shielded, black, POE-YINJ-S, 810017120543FeaturesShielded CAT5e cable and connectors for added protection against surges and interferenceCat5 rated RJ45 jack for more reliable high speed data connections (10/100MB)Shrouded DC jack for improved safetyApplicationsWireless Access Points and Client DevicesIP Phone and Security Camera SystemsThe POE-INJ-S and POE-YINJ-S are low cost Power over Ethernet (PoE) Inserters to insert PoE power to a CAT5 Ethernet data cable on the unused Ethernet pins 4,5(+) and 7,8(-).

Tycon Systems USB-RS485 PC Adapter For MPPT Solar Charge Controllers: 30N, 60N and 60P, Free PC App, TP-SC-USB-RS485, 810017123407FeaturesProvides Windows PC Connectivity for Tycon RS485 MPPT Solar ControllersCompatible with the following models: TP-SC24-30N-MPPT TP-SC24-60N-MPPT TP-SC48-60P-MPPTWorks with MyGreen Solar Monitor PC SoftwarePowers from PC USB PortApplicationsTycon TP-SCxxxx-MPPT Solar Charge ControllersRemote monitoring and controlThe Tycon Solar TP-SC-USB-RS485 USB to RS485 adapters facilitate connectivity between a windows PC and compatible Tycon MPPT solar controllers. Using the MyGreen Solar Monitor windows software, the MPPT solar controller can be setup and monitored via the PC. Data Collection can also be accomplished as long as the software is running and the MPPT Controller is connected to the PC.

Tycon Systems RemotePro 40W, 200Ah Batt, 170W Solar, 12/24V MPPT Controller, Pole/Wall Mount Steel Enclosure, RPSTL12/24M-200-170, 810017123650FeaturesComplete 170W Remote Power Solution for Off-Grid OperationWeatherproof Outdoor Enclosures with up to 400Ah BatteryEnclosures can be Wall or Pole Mounted (pole not included)High Performance Sealed Lead Acid AGM BatteriesMPPT and PWM Solar Charge Controllers, some with PoE outputThermostatically Controlled VentilationApplicationsWireless Base StationsRemote LightingSurveillance CamerasWireless Bridge and RepeatersOff-Grid PowerBackup PowerThe RemotePro 170W Series outdoor power systems are designed for applications that require a primary off-grid power source to run various equipment. The vented weatherproof enclosures have generous space available inside for mounting customer equipment. Multiple mounting brackets are welded inside the enclosure for mounting DIN rails or flat plates.The systems are available with MPPT or PWM temperature compensated solar charge controllers. Some of the PWM systems are available with 24V or 48V 10/100 Passive PoE outputs. The solar controllers turn off the load automatically if the battery voltage drops too low, in order to preserve battery life. The load turns on automatically once the battery voltage recovers.The outdoor enclosures are powder coated steel or aluminum. They are hinged and gasket sealed with a locking closure that accepts a common padlock for security. They have four cable gland ports for CAT5/6 cable, antenna cables/connectors or other cabling. Included is a thermostatically controlled fan assembly which turns on automatically when the temperature exceeds 45°C.The high quality solar panels have a 25 year power output guarantee and a +5W output tolerance. The enclosures and solar mount can be mounted to a wall or pole (2-4") with the included mounting system.Batteries are a Non-Spillable Valve Regulated Sealed Lead Acid Advance Glass Matt (AGM) type which have excellent temperature and deep discharge performance. Expected battery life exceeds 5 years.The systems come with all cabling required to connect the batteries to the controller and 20'outdoor rated cable to connect the solar panels to the controller.

Tycon Systems Mid Span, 1A per port, Gigabit PoE Injector, 4 ports with 1-4 power sources, VIN=VOUT, TP-MS4X4, 810017121793FeaturesHigh Power, Gigabit 4 Port Midspan PoE InjectorUp to 1A per Individual PortSurge Protection on Data In PortsUniversal PoE Voltage 12VDC to 57VDC.Supports Different PoE Voltage on Each Port.Supports Reverse Voltage on Individual Ports.Powers 802.3af and Passive PoE DevicesDIN Rail Mountable Includes DIN Rail adapters.I.T.E. Power Supply, UL ListedApplicationsWireless Access Points and Client DevicesIP Phone and Security Camera SystemsPower network devices from a central network roomThe TP-MS4x4 mid span PoE power sources are used for supplying PoE and data to multiple devices from a central location such as an operations room or equipment cabinet. The PoE devices feature a separate data-in port coupled with a data out/PoE port. The PoE function is considered Passive PoE and supports Gigabit Ethernet. The Midspan features Universal Voltage (MultiVolt) PoE outputs where the PoE voltage equals the input voltage. All ports can have the same PoE voltage or you can assign different voltages to different ports. This is useful for powering different devices with different PoE voltage requirements. The Midspan also allows some or all PoE ports to be reverse voltage PoE which is required by some Passive PoE devices like Canopy and EnGenius.PoE DC Voltage (12V-57V) is supplied on pins 4,5 (V+) and 7,8 (V-). Maximum power output per port is 1A. The individual outputs are overcurrent, over/under voltage and short circuit protected.The midspan is DIN Rail mountable with the included DIN Rail brackets.

Tycon Systems RemotePro 25W Power System, 100Ah Battery, 170W Solar, 12/24V 20A PWM Controller, Pole/Wall Mount Aluminum Enclosure, RPS12/24-100-170, 810017123773FeaturesComplete 170W Remote Power Solution for Off-Grid OperationWeatherproof Outdoor Enclosures with up to 400Ah BatteryEnclosures can be Wall or Pole Mounted (pole not included)High Performance Sealed Lead Acid AGM BatteriesMPPT and PWM Solar Charge Controllers, some with PoE outputThermostatically Controlled VentilationApplicationsWireless Base StationsRemote LightingSurveillance CamerasWireless Bridge and RepeatersOff-Grid PowerBackup PowerThe RemotePro 170W Series outdoor power systems are designed for applications that require a primary off-grid power source to run various equipment. The vented weatherproof enclosures have generous space available inside for mounting customer equipment. Multiple mounting brackets are welded inside the enclosure for mounting DIN rails or flat plates.The systems are available with MPPT or PWM temperature compensated solar charge controllers. Some of the PWM systems are available with 24V or 48V 10/100 Passive PoE outputs. The solar controllers turn off the load automatically if the battery voltage drops too low, in order to preserve battery life. The load turns on automatically once the battery voltage recovers.The outdoor enclosures are powder coated steel or aluminum. They are hinged and gasket sealed with a locking closure that accepts a common padlock for security. They have four cable gland ports for CAT5/6 cable, antenna cables/connectors or other cabling. Included is a thermostatically controlled fan assembly which turns on automatically when the temperature exceeds 45°C.The high quality solar panels have a 25 year power output guarantee and a +5W output tolerance. The enclosures and solar mount can be mounted to a wall or pole (2-4") with the included mounting system.Batteries are a Non-Spillable Valve Regulated Sealed Lead Acid Advance Glass Matt (AGM) type which have excellent temperature and deep discharge performance. Expected battery life exceeds 5 years.The systems come with all cabling required to connect the batteries to the controller and 20'outdoor rated cable to connect the solar panels to the controller.

Tycon Systems 18-36VDC IN, 24V 70W 4 pair Hi Power Passive PoE OUT, DC to DC and Gigabit PoE Injector, PoE Pins 1245(+) 3678(-), TP-DCDC-2424GR-VHP, 810017121502FeaturesInput Voltage 24VDC (18-36VDC)8 wire 24VDC Passive PoE OutputHigh Power Output to 70WDual DC Inputs for Connecting 2 Power SourcesGigabit Data ThruputLow self consumption power (2W)Short Circuit, Over Current and Reverse/Over Voltage ProtectionIndustrial Temperature RangeI.T.E. Power Supply, UL ListedApplications24VDC Remote Power SystemsUbiquiti airFiber x RadiosThe Gigabit compatible TP-DCDC-2424GR-VHP is a special very high power DC to DC converter / PoE inserter designed especially for Ubiquiti airFiber x wireless radio systems and other systems which require high power passive PoE (High PoE). The unique PoE inserter supplies 24VDC PoE power on all 8 Ethernet wires (4 pair) with the following pinout: 1,2,4,5 V+ and 3,6,7,8 VThey have two common (-) and two (+) for connecting 2 power sources, such as a primary with a backup power source. They have various protections for surge, short circuit and overload. The input and output are isolated.The units are DIN rail mountable with available adapters: Model DIN-ClipKit-Uni