Manufacturer: |
Tycon Systems
|
Supplier number: | TP-SW5G-VERSABT |
Technical specs:
- Port 1: 90W 4Pair 801.3bt PoE; 1,2,4,5(V+), 3,6,7,8 (V-)
- Port 2,3,4: 48V 30W 802.3at Mode B
- Port 5: 24V 12W Passive PoE; 4,5 (V+), 7,8 (V-)
- Transmission Speed: 1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation
- Connections: Shielded RJ45, Grounded to FG connection
- Input: Vin 44VDC to 57VDC on Wire Terminal
- PoE Protections: Over Temperature, Over Current, Short Circuit
- Surge Protection: IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC61000-4-4 (EFT) 40A (5/50ns)
- Self Consumption:< 3 Watt Typical
- Switch Technology: Store and Forward
- Protocol: CSMA/CD
- Flow Control: IEEE802.3x(full-duplex), Back Pressure(half-duplex)
- Data Transmission Rate: 1488000pps, 148800pps, 14880pps
- Address Table: 1K MAC, self-learning
- Operating Temp: -30 to +70°C (-22 to 158°F)
- Operating Humidity (RH): 5% - 90% (non condensing)
- Storage Temperature: -40 to +85°C (-40 to +185°F)
- Dimensions (LxWxH): 159 x 118 x 40mm (6.3 x 4.6 x 1.6")
- Weight: 318g (11oz)
- Warranty: 3 Years
Tycon Systems 5 Port Gigabit Switch, 44-58V WireTerm In, 1 90W 4 pair High PoE, 3 802.3at, 1 24V...more
Tycon Systems 5 Port Gigabit Switch, 44-58V WireTerm In, 1 90W 4 pair High PoE, 3 802.3at, 1 24V 12W passive PoE ports, Shield/Surge, TP-SW5G-VERSABT
Features
is a fully automatic high speed Layer 2 Ethernet switches with multiple function ports. Port 1 is a 90W 4pair 802.3bt PoE port; Port 2,3,4 are 48V 30W 802.3at compatible ports; Port 5 is a 24V 12W Passive PoE port. This allows a customer to power up multiple PoE devices with different power requirements. The switch requires a 44-57VDC (4A) power input.
The units are compatible with Category 5 or higher Ethernet cables. The RJ45 connectors are shielded and grounded to the common FG" (Frame Ground) connection. The units have 15kV surge protection on all Ethernet wires and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.
Features
- One (90W) 802.3bt PoE, Three (30W) 802.3at PoE and one (12W) 24V Passive PoE port
- Gigabit Compatible
- Built-in Surge Protection
- Automatic MDI/MDI-X Crossover
- Automatic Speed and Duplex Sensing
- Low Self Power and High Temperature Operation
DIN Rail Adapters included
- Power different PoE devices from a single 48V supply
- Cameras and Wireless Radios
- PoE Lighting Applications
is a fully automatic high speed Layer 2 Ethernet switches with multiple function ports. Port 1 is a 90W 4pair 802.3bt PoE port; Port 2,3,4 are 48V 30W 802.3at compatible ports; Port 5 is a 24V 12W Passive PoE port. This allows a customer to power up multiple PoE devices with different power requirements. The switch requires a 44-57VDC (4A) power input.
The units are compatible with Category 5 or higher Ethernet cables. The RJ45 connectors are shielded and grounded to the common FG" (Frame Ground) connection. The units have 15kV surge protection on all Ethernet wires and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
TY-52
You will receive your personal $15 voucher with your order confirmation
Spend over $200 and get a $15 voucher for your next order
$15
$348.67 *
$859.82 *
(59.45% Saved)
Free shipping!
Delivery time 3-5 business days
Secure payment
Tycon Systems 5 Port Gigabit Switch, 44-58V WireTerm In, 1 90W 4 pair High PoE, 3 802.3at, 1 24V 12W passive PoE ports, Shield/Surge, TP-SW5G-VERSABT
Add this item and enjoy fast shipping
Popular product! About people already have it in their shopping cart
Free SHIPPING - Directly from the manufacturer!
Top seller in the store!
Also order the matching accessories
Tycon Systems 8 x 5x1.75 inch ABS Outdoor Enclosure for TP-SW 5 port and 8 port PoE switches, 6 wire feedthru, ENC-SW-8x5
Tycon Systems |
ENC-SW-8x5
-60%
$174.19
*
$69.12
*
Show more accessories ()
Hide other accessories
Proven product
Top international brands already trust us!
Manufacturer: |
Tycon Systems
|
Supplier number: | TP-SW5G-VERSABT |
Technical specs:
- Port 1: 90W 4Pair 801.3bt PoE; 1,2,4,5(V+), 3,6,7,8 (V-)
- Port 2,3,4: 48V 30W 802.3at Mode B
- Port 5: 24V 12W Passive PoE; 4,5 (V+), 7,8 (V-)
- Transmission Speed: 1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation
- Connections: Shielded RJ45, Grounded to FG connection
- Input: Vin 44VDC to 57VDC on Wire Terminal
- PoE Protections: Over Temperature, Over Current, Short Circuit
- Surge Protection: IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC61000-4-4 (EFT) 40A (5/50ns)
- Self Consumption:< 3 Watt Typical
- Switch Technology: Store and Forward
- Protocol: CSMA/CD
- Flow Control: IEEE802.3x(full-duplex), Back Pressure(half-duplex)
- Data Transmission Rate: 1488000pps, 148800pps, 14880pps
- Address Table: 1K MAC, self-learning
- Operating Temp: -30 to +70°C (-22 to 158°F)
- Operating Humidity (RH): 5% - 90% (non condensing)
- Storage Temperature: -40 to +85°C (-40 to +185°F)
- Dimensions (LxWxH): 159 x 118 x 40mm (6.3 x 4.6 x 1.6")
- Weight: 318g (11oz)
- Warranty: 3 Years
Tycon Systems 5 Port Gigabit Switch, 44-58V WireTerm In, 1 90W 4 pair High PoE, 3 802.3at, 1 24V...more
Tycon Systems 5 Port Gigabit Switch, 44-58V WireTerm In, 1 90W 4 pair High PoE, 3 802.3at, 1 24V 12W passive PoE ports, Shield/Surge, TP-SW5G-VERSABT
Features
is a fully automatic high speed Layer 2 Ethernet switches with multiple function ports. Port 1 is a 90W 4pair 802.3bt PoE port; Port 2,3,4 are 48V 30W 802.3at compatible ports; Port 5 is a 24V 12W Passive PoE port. This allows a customer to power up multiple PoE devices with different power requirements. The switch requires a 44-57VDC (4A) power input.
The units are compatible with Category 5 or higher Ethernet cables. The RJ45 connectors are shielded and grounded to the common FG" (Frame Ground) connection. The units have 15kV surge protection on all Ethernet wires and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.
Features
- One (90W) 802.3bt PoE, Three (30W) 802.3at PoE and one (12W) 24V Passive PoE port
- Gigabit Compatible
- Built-in Surge Protection
- Automatic MDI/MDI-X Crossover
- Automatic Speed and Duplex Sensing
- Low Self Power and High Temperature Operation
DIN Rail Adapters included
- Power different PoE devices from a single 48V supply
- Cameras and Wireless Radios
- PoE Lighting Applications
is a fully automatic high speed Layer 2 Ethernet switches with multiple function ports. Port 1 is a 90W 4pair 802.3bt PoE port; Port 2,3,4 are 48V 30W 802.3at compatible ports; Port 5 is a 24V 12W Passive PoE port. This allows a customer to power up multiple PoE devices with different power requirements. The switch requires a 44-57VDC (4A) power input.
The units are compatible with Category 5 or higher Ethernet cables. The RJ45 connectors are shielded and grounded to the common FG" (Frame Ground) connection. The units have 15kV surge protection on all Ethernet wires and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
Also order the matching accessories
Tycon Systems 8 x 5x1.75 inch ABS Outdoor Enclosure for TP-SW 5 port and 8 port PoE switches, 6 wire feedthru, ENC-SW-8x5
Tycon Systems |
ENC-SW-8x5
-60%
$174.19
*
$69.12
*
Show more accessories ()
Hide other accessories
Questions about the article
Your question:
Personal data:
Continue shopping
TP-SW5G-VERSABT