Manufacturer: |
Tycon Systems
|
Supplier number: | EZBR-0214HD+ |
UPC: | 810017120161 |
Technical specs:
- Data Rates: 2.4 Ghz 802.11n: up to 300Mbps; 2.4 GHz 802.11g: up to 54Mbps
- Standards: IEEE802.11g/n, 802.3, 802.3u
- Power Supply: 100-240VAC 50/60Hz
- EZ-Bridge: 12VDC to 24VDC Passive PoE
- Average Power Consumption: 4W
- Regulatory Certifications: FCC Part 15 / UL
- RF Frequency Band: 2400 ~ 2497 MHz
- Modulation Technology: 802.11n: TDMA; 802.11g: OFDM
- Receive Sensitivity (Typical): 802.11n: -90 dBm; 802.11g: -75 dBm
- Transmit Power: 25dBm 316mW
- DC Connector Power Out Input Voltage @ Max: 10W
- Antenna: 2.4GHz 14dBi MIMO Panel Antenna, 35deg Beamwidth, >20dB front to back
- Operation Mode Bridge or Router: Point to Point Bridge, Access Point, Access Point WDS, Client, Client WDS
- Interface: 10/100Mbps RJ-45 LAN Port x 2
- IP Configuration: Static or Auto configuration using DHCP Client
- Security: MAC Address Filtering, WEP/WPA encryption, Hide SSID in beacons, Layer 2 isolation
- Management Configuration: Web-based configuration (HTTP), Console configuration (SSH), SNMP Protocol
- Firmware Upgrade: Upgrade firmware via web browser
- Antenna Physical Dimensions (L x W x D): 314mm x 187mm x 65mm (12.4" x 7.3" x 2.5")
- Complete System Weight: 3 kg (7 lbs)
- Operating Temperature: -30°C to +70°C (-22°F to 158°F)
- Warranty: 2 Year
Tycon Systems EZ-Bridge LT2 HD+ Industrial wireless PtP Bridge System, 3 miles range, 2.4GHz...more
Tycon Systems EZ-Bridge LT2 HD+ Industrial wireless PtP Bridge System, 3 miles range, 2.4GHz 802.11g/n 250mW, 75' CAT5 cables, 100Mbps, EZBR-0214HD+, 810017120161
High Power Electronics and powerful antenna
Operation up to 3 miles with good line of sight and up to 100 Mbps real world throughput
True Plug and Play
No driver needed. Pre-configured at the factory for automatic peer to peer communications
64 and 128bit WEP, WPA and WPA2 Encryption
Most powerful data security available
Web-based configuration
Remotely change device configuration or update firmware from anywhere on the network
Power over Ethernet
Antennas can be mounted up to 100meter (300') from the power inserter
Layer 2 Transparent Bridge
Appears to network devices as if an Ethernet cable has been installed between the 2 network nodes. Passes DHCP, VOIP Packets, VLAN Packets and supports multiple MAC addresses
The EZ-Bridge LT2HD+ is a high power 25dBm (316mW) outdoor wireless bridge system operating in the 2.4GHz unlicensed frequency spectrum providing real world throughput up to 100 Mb/sec. It complies with the 802.11gn standards to insure interoperability. The EZ-Bridge LT2HD+ creates a transparent wireless bridge between two networks up to 3 miles apart with good line of sight. It supports VOIP, VPN, multiple MAC addresses and DHCP across the wireless link. It is the perfect plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access. Multiple EZ-Bridge LT2HD+ units can be connected in a mesh configuration to allow interconnecting more than two sites.
With its password verification, MAC address authentication, SSID suppression and advanced WPA encryption, the system provides the best available wireless data security.
Installation is a snap because of the plug and play features which have been built into the system. Just install the antennas and plug in the power inserters. The units will automatically find their peer and create a secure wireless network link. If changes to the pre-configured settings are desired, they can be easily done thru the built-in web interface from any point on either side of the network. There are no drivers or software that needs to be loaded to the computer.
The EZ-Bridge LT2HD+ comes complete with all the electronics that are needed for a point to point wireless network bridge installation; including 2 powerful 14dBi 802.11gn MIMO antennas with built-in high power electronics, Bracket Kits which accommodate pole or wall mounting, Surge Protected Cat5e rated POE (Power Over Ethernet) power inserters and 75' outoor rated shielded CAT5 cables. Customer needs to supply CAT5 cabling between the power inserter and his computer, router or switch.
High Power Electronics and powerful antenna
Operation up to 3 miles with good line of sight and up to 100 Mbps real world throughput
True Plug and Play
No driver needed. Pre-configured at the factory for automatic peer to peer communications
64 and 128bit WEP, WPA and WPA2 Encryption
Most powerful data security available
Web-based configuration
Remotely change device configuration or update firmware from anywhere on the network
Power over Ethernet
Antennas can be mounted up to 100meter (300') from the power inserter
Layer 2 Transparent Bridge
Appears to network devices as if an Ethernet cable has been installed between the 2 network nodes. Passes DHCP, VOIP Packets, VLAN Packets and supports multiple MAC addresses
The EZ-Bridge LT2HD+ is a high power 25dBm (316mW) outdoor wireless bridge system operating in the 2.4GHz unlicensed frequency spectrum providing real world throughput up to 100 Mb/sec. It complies with the 802.11gn standards to insure interoperability. The EZ-Bridge LT2HD+ creates a transparent wireless bridge between two networks up to 3 miles apart with good line of sight. It supports VOIP, VPN, multiple MAC addresses and DHCP across the wireless link. It is the perfect plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access. Multiple EZ-Bridge LT2HD+ units can be connected in a mesh configuration to allow interconnecting more than two sites.
With its password verification, MAC address authentication, SSID suppression and advanced WPA encryption, the system provides the best available wireless data security.
Installation is a snap because of the plug and play features which have been built into the system. Just install the antennas and plug in the power inserters. The units will automatically find their peer and create a secure wireless network link. If changes to the pre-configured settings are desired, they can be easily done thru the built-in web interface from any point on either side of the network. There are no drivers or software that needs to be loaded to the computer.
The EZ-Bridge LT2HD+ comes complete with all the electronics that are needed for a point to point wireless network bridge installation; including 2 powerful 14dBi 802.11gn MIMO antennas with built-in high power electronics, Bracket Kits which accommodate pole or wall mounting, Surge Protected Cat5e rated POE (Power Over Ethernet) power inserters and 75' outoor rated shielded CAT5 cables. Customer needs to supply CAT5 cabling between the power inserter and his computer, router or switch.
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
TY-95
You will receive your personal $15 voucher with your order confirmation
Spend over $200 and get a $15 voucher for your next order
$15
$456.70 *
$1,134.45 *
(59.74% Saved)
Free shipping!
Delivery time 3-5 business days
Secure payment
Tycon Systems EZ-Bridge LT2 HD+ Industrial wireless PtP Bridge System, 3 miles range, 2.4GHz 802.11g/n 250mW, 75' CAT5 cables, 100Mbps, EZBR-0214HD+
Add this item and enjoy fast shipping
Popular product! About people already have it in their shopping cart
Free SHIPPING - Directly from the manufacturer!
Top seller in the store!
Proven product
Top international brands already trust us!
Secure shopping
- Free shipping from $50
- Fast delivery
- Your personal buyer protection
Manufacturer: |
Tycon Systems
|
Supplier number: | EZBR-0214HD+ |
UPC: | 810017120161 |
Technical specs:
- Data Rates: 2.4 Ghz 802.11n: up to 300Mbps; 2.4 GHz 802.11g: up to 54Mbps
- Standards: IEEE802.11g/n, 802.3, 802.3u
- Power Supply: 100-240VAC 50/60Hz
- EZ-Bridge: 12VDC to 24VDC Passive PoE
- Average Power Consumption: 4W
- Regulatory Certifications: FCC Part 15 / UL
- RF Frequency Band: 2400 ~ 2497 MHz
- Modulation Technology: 802.11n: TDMA; 802.11g: OFDM
- Receive Sensitivity (Typical): 802.11n: -90 dBm; 802.11g: -75 dBm
- Transmit Power: 25dBm 316mW
- DC Connector Power Out Input Voltage @ Max: 10W
- Antenna: 2.4GHz 14dBi MIMO Panel Antenna, 35deg Beamwidth, >20dB front to back
- Operation Mode Bridge or Router: Point to Point Bridge, Access Point, Access Point WDS, Client, Client WDS
- Interface: 10/100Mbps RJ-45 LAN Port x 2
- IP Configuration: Static or Auto configuration using DHCP Client
- Security: MAC Address Filtering, WEP/WPA encryption, Hide SSID in beacons, Layer 2 isolation
- Management Configuration: Web-based configuration (HTTP), Console configuration (SSH), SNMP Protocol
- Firmware Upgrade: Upgrade firmware via web browser
- Antenna Physical Dimensions (L x W x D): 314mm x 187mm x 65mm (12.4" x 7.3" x 2.5")
- Complete System Weight: 3 kg (7 lbs)
- Operating Temperature: -30°C to +70°C (-22°F to 158°F)
- Warranty: 2 Year
Tycon Systems EZ-Bridge LT2 HD+ Industrial wireless PtP Bridge System, 3 miles range, 2.4GHz...more
Tycon Systems EZ-Bridge LT2 HD+ Industrial wireless PtP Bridge System, 3 miles range, 2.4GHz 802.11g/n 250mW, 75' CAT5 cables, 100Mbps, EZBR-0214HD+, 810017120161
High Power Electronics and powerful antenna
Operation up to 3 miles with good line of sight and up to 100 Mbps real world throughput
True Plug and Play
No driver needed. Pre-configured at the factory for automatic peer to peer communications
64 and 128bit WEP, WPA and WPA2 Encryption
Most powerful data security available
Web-based configuration
Remotely change device configuration or update firmware from anywhere on the network
Power over Ethernet
Antennas can be mounted up to 100meter (300') from the power inserter
Layer 2 Transparent Bridge
Appears to network devices as if an Ethernet cable has been installed between the 2 network nodes. Passes DHCP, VOIP Packets, VLAN Packets and supports multiple MAC addresses
The EZ-Bridge LT2HD+ is a high power 25dBm (316mW) outdoor wireless bridge system operating in the 2.4GHz unlicensed frequency spectrum providing real world throughput up to 100 Mb/sec. It complies with the 802.11gn standards to insure interoperability. The EZ-Bridge LT2HD+ creates a transparent wireless bridge between two networks up to 3 miles apart with good line of sight. It supports VOIP, VPN, multiple MAC addresses and DHCP across the wireless link. It is the perfect plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access. Multiple EZ-Bridge LT2HD+ units can be connected in a mesh configuration to allow interconnecting more than two sites.
With its password verification, MAC address authentication, SSID suppression and advanced WPA encryption, the system provides the best available wireless data security.
Installation is a snap because of the plug and play features which have been built into the system. Just install the antennas and plug in the power inserters. The units will automatically find their peer and create a secure wireless network link. If changes to the pre-configured settings are desired, they can be easily done thru the built-in web interface from any point on either side of the network. There are no drivers or software that needs to be loaded to the computer.
The EZ-Bridge LT2HD+ comes complete with all the electronics that are needed for a point to point wireless network bridge installation; including 2 powerful 14dBi 802.11gn MIMO antennas with built-in high power electronics, Bracket Kits which accommodate pole or wall mounting, Surge Protected Cat5e rated POE (Power Over Ethernet) power inserters and 75' outoor rated shielded CAT5 cables. Customer needs to supply CAT5 cabling between the power inserter and his computer, router or switch.
High Power Electronics and powerful antenna
Operation up to 3 miles with good line of sight and up to 100 Mbps real world throughput
True Plug and Play
No driver needed. Pre-configured at the factory for automatic peer to peer communications
64 and 128bit WEP, WPA and WPA2 Encryption
Most powerful data security available
Web-based configuration
Remotely change device configuration or update firmware from anywhere on the network
Power over Ethernet
Antennas can be mounted up to 100meter (300') from the power inserter
Layer 2 Transparent Bridge
Appears to network devices as if an Ethernet cable has been installed between the 2 network nodes. Passes DHCP, VOIP Packets, VLAN Packets and supports multiple MAC addresses
The EZ-Bridge LT2HD+ is a high power 25dBm (316mW) outdoor wireless bridge system operating in the 2.4GHz unlicensed frequency spectrum providing real world throughput up to 100 Mb/sec. It complies with the 802.11gn standards to insure interoperability. The EZ-Bridge LT2HD+ creates a transparent wireless bridge between two networks up to 3 miles apart with good line of sight. It supports VOIP, VPN, multiple MAC addresses and DHCP across the wireless link. It is the perfect plug and play solution for connecting the networks in two or more buildings, internet access sharing, remote video surveillance or remote network access. Multiple EZ-Bridge LT2HD+ units can be connected in a mesh configuration to allow interconnecting more than two sites.
With its password verification, MAC address authentication, SSID suppression and advanced WPA encryption, the system provides the best available wireless data security.
Installation is a snap because of the plug and play features which have been built into the system. Just install the antennas and plug in the power inserters. The units will automatically find their peer and create a secure wireless network link. If changes to the pre-configured settings are desired, they can be easily done thru the built-in web interface from any point on either side of the network. There are no drivers or software that needs to be loaded to the computer.
The EZ-Bridge LT2HD+ comes complete with all the electronics that are needed for a point to point wireless network bridge installation; including 2 powerful 14dBi 802.11gn MIMO antennas with built-in high power electronics, Bracket Kits which accommodate pole or wall mounting, Surge Protected Cat5e rated POE (Power Over Ethernet) power inserters and 75' outoor rated shielded CAT5 cables. Customer needs to supply CAT5 cabling between the power inserter and his computer, router or switch.
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
Questions about the article
Your question:
Personal data:
Continue shopping
EZBR-0214HD+