Tycon Systems 10 Port Industrial Managed Gigabit PoE Switch, 8 802.3at or 24V Passive PoE (30W) Ports, 2 SFP Ports, -40 to +75C, TP-SW8GAT/24-SFP
Technical specs:
- Ports 1-8: Configurable as 802.3af/at or 24V Passive PoE, 30W
- Ports 9-10: SFP Fiber Transceivers Console Port (38400 Baud, 8 Bit, N parity, 1 stop bit, N flow control)
- Alarm Input: 5-57VDC 0.5mA
- Alarm Relay Output: up to 60V 3A Switching
- Temperature/Humidity Probe Input
- Ethernet Transmission Speed: 1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation
- Fiber Transceiver Compatibility: 1GMulti Mode or Single Mode
- Connections: Shielded RJ45, Shielded SFP/LC, Grounded to Case
- Power Input: Vin 37VDC to 57VDC on Dual Input Wire Terminal (Max wire size 12AWG)
- Self Consumption:< 3 watts typical
- PoE Protections: Over Voltage, Over Current, Short Circuit
- PoE Pinout: 802.3af/at Ports = 1/2 V+; 3/6 V- 24V Passive PoE = 4/5 V+; 7/8 V-
- Surge Protection: 6KV Normal Mode, 2KV Differential Mode
- ESD Protection: 15KV Air, 8KV Touch
- Management Methods: WEB, CLI, TELNET, SSH, SNMP
- VLANS: Supports up to 4094 active VLANs simultaneously (out of 4096 VLAN IDs); Port-based VLAN; 802.1Q tag-based VLAN; 802.1ad Q-in-Q Tunneling, Private Vlan (Protected Port), GARP/GVRP
- Port Management: PoE enable/disable, PoE Mode control, Soft Re-boot PoE Port, Total PoE Power budget control, PoE Port priority, PoE port power limitation, PD Classification Detect, PD alive check, PoE scheduling
- STP: Standard Spanning Tree (STP) 802.1d,Rapid Spanning Tree (RSTP) 802.1w Multiple Spanning Tree (MSTP) 802.1s Loop guard, TC-BPDU Guard, BPDU Guard, BPDU Filter
- Ring Network Protocol: ERPS (Ethernet Ring Protection Switching),<20ms G.8032 ERPS Ring
- Link Aggregation: Static/Manual Aggregation, LACP Dynamic Convergence, Algorithm based on source/destination IP or MAC
- IGMP v1/v2/v3 snooping: IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups, MLD snooping, Multicast VLAN
- MAC Management: Add/Delete, MAC Address learning limit, Dynamic Aging Time Setting
- Layer 3 Switching Functions: Virtual VLAN Interface, ARP, Static Router
- ACL (Access Control List): Based on source MAC, destination MAC, prototcol type, source IP, destination IP, L4 port number
- QOS (Quality of Service): 802.1p(COS), DSCP Classification, Source IP/Destination IP/Port Number Classification
- Anti-Attack Support: DOS Defense,CPU Protection, limit message send rate ARP Binding (IP, MAC, PORT)
- Other Functions: LLDP, Add/Delete Users, Log user login/operation/status/events, Port security (Dying Gasp/SNMP Trap), Device Reset, Configuration save/restore, NTP time setting
- Jumbo Frame Support: 9216 Bytes
- Switching Capacity: 20 Gbps
- Packet Forwarding Rate: 14.88Mpps @ 64 Bytes
- Forwarding Mode: Store and Forward
- Package Cache: 4.1M
- RAM / Flash: 1 Gb / 128MB
- Address Table: 8K MAC, self-learning
- IEEE 802.3i 10BASET
- 802.3u 100BASET
- 802.3z 1000BASET
- 802.3x Flow Control
- 802.3ab Gigabit Media Independent Interface (GMII)
- 802.1q VLANs
- 802.1p (QOS)
- 802.3ad Link Aggregation Control Protocol (LACP)
- 802.3af /at (PoE) IEEE G.8032 Ethernet ring protection (<20ms) (STP)
- 802.1d, (RSTP)
- 802.1w, (MSTP)
- 802.1s
- EMI: FCC Part 15, CISPR (EN55032) class A
- EMS: EN61000-4-2 (ESD), EN61000-4-4 (EFT), EN-61000-4-5 (Surge)
- Shock: IEC 60068-2-27
- Free Fall: IEC 60068-2-32
- Vibration: IEC 60068-2-6
- Environmental Protection: IP40
- Operating Temp: -40 to +75°C(-40 to 167°F)
- Operating Humidity (RH): 5% - 95% (non condensing)
- Storage Temperature: -40 to +85°C(-40 to +185°F)
- MTBF: 50,000 hours
- Certifications: CE, FCC, RoHS
- Dimensions (LxWxH): 165*145*53.5(mm) (6.5 x 5.7 x 2.1")
- Weight: 0.9kg (2lb)
- Warranty: 5 Years
Network Protocols and Standards Summary
Other Industry Standards
Tycon Systems 10 Port Industrial Managed Gigabit PoE Switch, 8 802.3at or 24V Passive PoE (30W)...more
Tycon Systems 10 Port Industrial Managed Gigabit PoE Switch, 8 802.3at or 24V Passive PoE (30W) Ports, 2 SFP Ports, -40 to +75C, TP-SW8GAT/24-SFP, 810017124053
Features
The PoE ports are manageable via the user interface. The maximum total power for all ports is an impressive 240W.
The switch features security protocols like SSH for secure access of the switch command interface. The interface can be accessed via the serial console port or any of the Ethernet ports. The command interface can be controlled via web browser, command line interface(CLI), TELNET, SSH or SNMP.
With L2+ features, the switches provide better manageability, security, QOS features and performance. VLAN, Port Mirroring, Port Isolation, IGMP Snooping, DHCP Snooping, LLDP, ARP Inspection, Storm Control, IP Source Guard, Access Control Lists, PoE management are just some of the features available with this Industrial PoE Switch.
Spanning Tree, Jumbo Frames, Ring Topology are also supported.
The switches feature two separate power inputs for primary and backup power. They require a 37VDC to 57VDC input on the wire terminal connector which is capable of accepting up to 12AWG wire.
The units are compatible with Category 5 or higher Ethernet cables with network distances up to 100m. The optical range for fiber ports is up to 120Km. The RJ45 connectors are shielded and grounded to the case. The units have surge protection on all ports and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.
Features
- Industrial Strength (-40C to +75C Operating Temperature)
- 10/100/1000 Gigabit Compatible Ethernet and 1G Fiber
- Ultimate Flexibility for Broadband and Security Integrators:
- Port 1-8 802.3at or Passive 24V PoE, 30W
- Port 9-10 1Gb SFP Single/Multimode Fiber ports
- Manageable via Console Port or IP
- Surge Protected Voltage and Ethernet Inputs, Metal Shell
- Integrated DIN Rail Mount and Wall Mounts
- Outdoor Network Installations
- Cameras and Wireless Radios
- Factory networks
- PoE Lighting Applications
The PoE ports are manageable via the user interface. The maximum total power for all ports is an impressive 240W.
The switch features security protocols like SSH for secure access of the switch command interface. The interface can be accessed via the serial console port or any of the Ethernet ports. The command interface can be controlled via web browser, command line interface(CLI), TELNET, SSH or SNMP.
With L2+ features, the switches provide better manageability, security, QOS features and performance. VLAN, Port Mirroring, Port Isolation, IGMP Snooping, DHCP Snooping, LLDP, ARP Inspection, Storm Control, IP Source Guard, Access Control Lists, PoE management are just some of the features available with this Industrial PoE Switch.
Spanning Tree, Jumbo Frames, Ring Topology are also supported.
The switches feature two separate power inputs for primary and backup power. They require a 37VDC to 57VDC input on the wire terminal connector which is capable of accepting up to 12AWG wire.
The units are compatible with Category 5 or higher Ethernet cables with network distances up to 100m. The optical range for fiber ports is up to 120Km. The RJ45 connectors are shielded and grounded to the case. The units have surge protection on all ports and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
TY-41
You will receive your personal $15 voucher with your order confirmation
Spend over $200 and get a $15 voucher for your next order
$15
$472.02 *
$1,214.98 *
(61.15% Saved)
Free shipping!
Delivery time 3-5 business days
Secure payment
Tycon Systems 10 Port Industrial Managed Gigabit PoE Switch, 8 802.3at or 24V Passive PoE (30W) Ports, 2 SFP Ports, -40 to +75C, TP-SW8GAT/24-SFP
Add this item and enjoy fast shipping
Popular product! About people already have it in their shopping cart
Free SHIPPING - Directly from the manufacturer!
Top seller in the store!
Proven product
Top international brands already trust us!
Secure shopping
- Free shipping from $50
- Fast delivery
- Your personal buyer protection
| Manufacturer: |
Tycon Systems
|
| Supplier number: | TP-SW8GAT/24-SFP |
| UPC: | 810017124053 |
Technical specs:
- Ports 1-8: Configurable as 802.3af/at or 24V Passive PoE, 30W
- Ports 9-10: SFP Fiber Transceivers Console Port (38400 Baud, 8 Bit, N parity, 1 stop bit, N flow control)
- Alarm Input: 5-57VDC 0.5mA
- Alarm Relay Output: up to 60V 3A Switching
- Temperature/Humidity Probe Input
- Ethernet Transmission Speed: 1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation
- Fiber Transceiver Compatibility: 1GMulti Mode or Single Mode
- Connections: Shielded RJ45, Shielded SFP/LC, Grounded to Case
- Power Input: Vin 37VDC to 57VDC on Dual Input Wire Terminal (Max wire size 12AWG)
- Self Consumption:< 3 watts typical
- PoE Protections: Over Voltage, Over Current, Short Circuit
- PoE Pinout: 802.3af/at Ports = 1/2 V+; 3/6 V- 24V Passive PoE = 4/5 V+; 7/8 V-
- Surge Protection: 6KV Normal Mode, 2KV Differential Mode
- ESD Protection: 15KV Air, 8KV Touch
- Management Methods: WEB, CLI, TELNET, SSH, SNMP
- VLANS: Supports up to 4094 active VLANs simultaneously (out of 4096 VLAN IDs); Port-based VLAN; 802.1Q tag-based VLAN; 802.1ad Q-in-Q Tunneling, Private Vlan (Protected Port), GARP/GVRP
- Port Management: PoE enable/disable, PoE Mode control, Soft Re-boot PoE Port, Total PoE Power budget control, PoE Port priority, PoE port power limitation, PD Classification Detect, PD alive check, PoE scheduling
- STP: Standard Spanning Tree (STP) 802.1d,Rapid Spanning Tree (RSTP) 802.1w Multiple Spanning Tree (MSTP) 802.1s Loop guard, TC-BPDU Guard, BPDU Guard, BPDU Filter
- Ring Network Protocol: ERPS (Ethernet Ring Protection Switching),<20ms G.8032 ERPS Ring
- Link Aggregation: Static/Manual Aggregation, LACP Dynamic Convergence, Algorithm based on source/destination IP or MAC
- IGMP v1/v2/v3 snooping: IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups, MLD snooping, Multicast VLAN
- MAC Management: Add/Delete, MAC Address learning limit, Dynamic Aging Time Setting
- Layer 3 Switching Functions: Virtual VLAN Interface, ARP, Static Router
- ACL (Access Control List): Based on source MAC, destination MAC, prototcol type, source IP, destination IP, L4 port number
- QOS (Quality of Service): 802.1p(COS), DSCP Classification, Source IP/Destination IP/Port Number Classification
- Anti-Attack Support: DOS Defense,CPU Protection, limit message send rate ARP Binding (IP, MAC, PORT)
- Other Functions: LLDP, Add/Delete Users, Log user login/operation/status/events, Port security (Dying Gasp/SNMP Trap), Device Reset, Configuration save/restore, NTP time setting
- Jumbo Frame Support: 9216 Bytes
- Switching Capacity: 20 Gbps
- Packet Forwarding Rate: 14.88Mpps @ 64 Bytes
- Forwarding Mode: Store and Forward
- Package Cache: 4.1M
- RAM / Flash: 1 Gb / 128MB
- Address Table: 8K MAC, self-learning
- IEEE 802.3i 10BASET
- 802.3u 100BASET
- 802.3z 1000BASET
- 802.3x Flow Control
- 802.3ab Gigabit Media Independent Interface (GMII)
- 802.1q VLANs
- 802.1p (QOS)
- 802.3ad Link Aggregation Control Protocol (LACP)
- 802.3af /at (PoE) IEEE G.8032 Ethernet ring protection (<20ms) (STP)
- 802.1d, (RSTP)
- 802.1w, (MSTP)
- 802.1s
- EMI: FCC Part 15, CISPR (EN55032) class A
- EMS: EN61000-4-2 (ESD), EN61000-4-4 (EFT), EN-61000-4-5 (Surge)
- Shock: IEC 60068-2-27
- Free Fall: IEC 60068-2-32
- Vibration: IEC 60068-2-6
- Environmental Protection: IP40
- Operating Temp: -40 to +75°C(-40 to 167°F)
- Operating Humidity (RH): 5% - 95% (non condensing)
- Storage Temperature: -40 to +85°C(-40 to +185°F)
- MTBF: 50,000 hours
- Certifications: CE, FCC, RoHS
- Dimensions (LxWxH): 165*145*53.5(mm) (6.5 x 5.7 x 2.1")
- Weight: 0.9kg (2lb)
- Warranty: 5 Years
Network Protocols and Standards Summary
Other Industry Standards
Tycon Systems 10 Port Industrial Managed Gigabit PoE Switch, 8 802.3at or 24V Passive PoE (30W)...more
Tycon Systems 10 Port Industrial Managed Gigabit PoE Switch, 8 802.3at or 24V Passive PoE (30W) Ports, 2 SFP Ports, -40 to +75C, TP-SW8GAT/24-SFP, 810017124053
Features
The PoE ports are manageable via the user interface. The maximum total power for all ports is an impressive 240W.
The switch features security protocols like SSH for secure access of the switch command interface. The interface can be accessed via the serial console port or any of the Ethernet ports. The command interface can be controlled via web browser, command line interface(CLI), TELNET, SSH or SNMP.
With L2+ features, the switches provide better manageability, security, QOS features and performance. VLAN, Port Mirroring, Port Isolation, IGMP Snooping, DHCP Snooping, LLDP, ARP Inspection, Storm Control, IP Source Guard, Access Control Lists, PoE management are just some of the features available with this Industrial PoE Switch.
Spanning Tree, Jumbo Frames, Ring Topology are also supported.
The switches feature two separate power inputs for primary and backup power. They require a 37VDC to 57VDC input on the wire terminal connector which is capable of accepting up to 12AWG wire.
The units are compatible with Category 5 or higher Ethernet cables with network distances up to 100m. The optical range for fiber ports is up to 120Km. The RJ45 connectors are shielded and grounded to the case. The units have surge protection on all ports and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.
Features
- Industrial Strength (-40C to +75C Operating Temperature)
- 10/100/1000 Gigabit Compatible Ethernet and 1G Fiber
- Ultimate Flexibility for Broadband and Security Integrators:
- Port 1-8 802.3at or Passive 24V PoE, 30W
- Port 9-10 1Gb SFP Single/Multimode Fiber ports
- Manageable via Console Port or IP
- Surge Protected Voltage and Ethernet Inputs, Metal Shell
- Integrated DIN Rail Mount and Wall Mounts
- Outdoor Network Installations
- Cameras and Wireless Radios
- Factory networks
- PoE Lighting Applications
The PoE ports are manageable via the user interface. The maximum total power for all ports is an impressive 240W.
The switch features security protocols like SSH for secure access of the switch command interface. The interface can be accessed via the serial console port or any of the Ethernet ports. The command interface can be controlled via web browser, command line interface(CLI), TELNET, SSH or SNMP.
With L2+ features, the switches provide better manageability, security, QOS features and performance. VLAN, Port Mirroring, Port Isolation, IGMP Snooping, DHCP Snooping, LLDP, ARP Inspection, Storm Control, IP Source Guard, Access Control Lists, PoE management are just some of the features available with this Industrial PoE Switch.
Spanning Tree, Jumbo Frames, Ring Topology are also supported.
The switches feature two separate power inputs for primary and backup power. They require a 37VDC to 57VDC input on the wire terminal connector which is capable of accepting up to 12AWG wire.
The units are compatible with Category 5 or higher Ethernet cables with network distances up to 100m. The optical range for fiber ports is up to 120Km. The RJ45 connectors are shielded and grounded to the case. The units have surge protection on all ports and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
Questions about the article
Your question:
Personal data:
Continue shopping
TP-SW8GAT/24-SFP
