Manufacturer: |
Across International
|
Supplier number: | T40-UL |
Technical specs:
- Model: T40-UL
- Electrical requirements: 110V or 220V, 60Hz 1-PH Compressor:
- Make: Embraco Refrigerant: R404A (220g) Cooling
- Capacity: @ -10°C: 300W @ -20°C: 250W @ -30°C: 150W @ -40°C: 50W
- Reservoir: Volume 1.3 gallon (5 liters) Dimensions Diameter 6 1/4" Depth: 9 1/2"
- Temperature: -40°C (-40°F)
- Display: digital Unit: °C Sensor: Pt100
- Finish: Exterior: powder coated steel Interior: polished type 304 stainless steel
- Trap:
- Material: high borosilicate glass 3.3 Volume: 500ml Diameter: 2" Depth: 11 1/2" Quantity: three Vacuum level: lower than 500 Micron
- Vacuum connection: 3/8" hose barb
- Recommended coolant: 50% Ethylene glycol + 50% purified water
- Unit/shipping weight: 100 lbs / 140 lbs
- Unit/shipping dimensions: 13 x 18 x 26" / 18 x 23 x 38" (WxDxH)
- Compliance: UL 471:2010 Ed.10+R:08Dec2016 CSA C22.2#120 Issued: 2013/03/01 Ed: 4 Refrigeration Equipment
- Warranty: One year
Across International Ai -40°C 1.5L Capacity Cold Trap with 500ml x 3 Glass Traps ETL, T40-UL The...more
Across International Ai -40°C 1.5L Capacity Cold Trap with 500ml x 3 Glass Traps ETL, T40-UL
The Ai 2nd Gen -40C/F T40 cold traps now all ETL certified. They have a much smaller footprint, but at the same time, offering you the same cooling power, 1.5X reservoir and 1.6X trap capacity. New upward hose barb ports provide you safer and easier vacuum tubing connection and removal.
In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. Particularly large cold traps are necessary when removing large amounts of liquid as in freeze drying.
Pumps that use oil either as their working fluid (diffusion pumps), or as their lubricant (mechanical rotary pumps), are often the sources of contamination in vacuum systems. Placing a cold trap at the mouth of such a pump greatly lowers the risk that oil vapors will back stream into the cavity.
Care should be taken when using a cold trap not to condense liquid oxygen (a light blue liquid) into the cold trap. Liquid oxygen is potentially explosive, and this is especially true if the trap has been used to trap solvent. Liquid oxygen can be condensed into a cold trap if a pump has sucked air through the trap when the trap is very cold.
Ai UL/CSA certified T40-UL -40°C/°F cold trap features
The Ai 2nd Gen -40C/F T40 cold traps now all ETL certified. They have a much smaller footprint, but at the same time, offering you the same cooling power, 1.5X reservoir and 1.6X trap capacity. New upward hose barb ports provide you safer and easier vacuum tubing connection and removal.
In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. Particularly large cold traps are necessary when removing large amounts of liquid as in freeze drying.
Pumps that use oil either as their working fluid (diffusion pumps), or as their lubricant (mechanical rotary pumps), are often the sources of contamination in vacuum systems. Placing a cold trap at the mouth of such a pump greatly lowers the risk that oil vapors will back stream into the cavity.
Care should be taken when using a cold trap not to condense liquid oxygen (a light blue liquid) into the cold trap. Liquid oxygen is potentially explosive, and this is especially true if the trap has been used to trap solvent. Liquid oxygen can be condensed into a cold trap if a pump has sucked air through the trap when the trap is very cold.
Ai UL/CSA certified T40-UL -40°C/°F cold trap features
- ETL tested to UL and CSA standards
- 1.5X more reservoir and 1.6X more trap capacity compare to its predecessor
- No dry ice or liquid nitrogen needed
- All steel housing for durability
- Small footprint, built-in swivel casters for mobility
- Plug and play, no assembly required
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
AC-93
You will receive your personal $15 voucher with your order confirmation
Spend over $200 and get a $15 voucher for your next order
$15
$3,808.86 *
$9,872.57 *
(61.42% Saved)
Free shipping!
Delivery time 9-11 business days
Secure payment
Across International Ai -40°C 1.5L Capacity Cold Trap with 500ml x 3 Glass Traps ETL, T40-UL
Add this item and enjoy fast shipping
Popular product! About people already have it in their shopping cart
Free SHIPPING - Directly from the manufacturer!
Top seller in the store!
Proven product
Top international brands already trust us!
Secure shopping
- Free shipping from $50
- Fast delivery
- Your personal buyer protection
Manufacturer: |
Across International
|
Supplier number: | T40-UL |
Technical specs:
- Model: T40-UL
- Electrical requirements: 110V or 220V, 60Hz 1-PH Compressor:
- Make: Embraco Refrigerant: R404A (220g) Cooling
- Capacity: @ -10°C: 300W @ -20°C: 250W @ -30°C: 150W @ -40°C: 50W
- Reservoir: Volume 1.3 gallon (5 liters) Dimensions Diameter 6 1/4" Depth: 9 1/2"
- Temperature: -40°C (-40°F)
- Display: digital Unit: °C Sensor: Pt100
- Finish: Exterior: powder coated steel Interior: polished type 304 stainless steel
- Trap:
- Material: high borosilicate glass 3.3 Volume: 500ml Diameter: 2" Depth: 11 1/2" Quantity: three Vacuum level: lower than 500 Micron
- Vacuum connection: 3/8" hose barb
- Recommended coolant: 50% Ethylene glycol + 50% purified water
- Unit/shipping weight: 100 lbs / 140 lbs
- Unit/shipping dimensions: 13 x 18 x 26" / 18 x 23 x 38" (WxDxH)
- Compliance: UL 471:2010 Ed.10+R:08Dec2016 CSA C22.2#120 Issued: 2013/03/01 Ed: 4 Refrigeration Equipment
- Warranty: One year
Across International Ai -40°C 1.5L Capacity Cold Trap with 500ml x 3 Glass Traps ETL, T40-UL The...more
Across International Ai -40°C 1.5L Capacity Cold Trap with 500ml x 3 Glass Traps ETL, T40-UL
The Ai 2nd Gen -40C/F T40 cold traps now all ETL certified. They have a much smaller footprint, but at the same time, offering you the same cooling power, 1.5X reservoir and 1.6X trap capacity. New upward hose barb ports provide you safer and easier vacuum tubing connection and removal.
In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. Particularly large cold traps are necessary when removing large amounts of liquid as in freeze drying.
Pumps that use oil either as their working fluid (diffusion pumps), or as their lubricant (mechanical rotary pumps), are often the sources of contamination in vacuum systems. Placing a cold trap at the mouth of such a pump greatly lowers the risk that oil vapors will back stream into the cavity.
Care should be taken when using a cold trap not to condense liquid oxygen (a light blue liquid) into the cold trap. Liquid oxygen is potentially explosive, and this is especially true if the trap has been used to trap solvent. Liquid oxygen can be condensed into a cold trap if a pump has sucked air through the trap when the trap is very cold.
Ai UL/CSA certified T40-UL -40°C/°F cold trap features
The Ai 2nd Gen -40C/F T40 cold traps now all ETL certified. They have a much smaller footprint, but at the same time, offering you the same cooling power, 1.5X reservoir and 1.6X trap capacity. New upward hose barb ports provide you safer and easier vacuum tubing connection and removal.
In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. Particularly large cold traps are necessary when removing large amounts of liquid as in freeze drying.
Pumps that use oil either as their working fluid (diffusion pumps), or as their lubricant (mechanical rotary pumps), are often the sources of contamination in vacuum systems. Placing a cold trap at the mouth of such a pump greatly lowers the risk that oil vapors will back stream into the cavity.
Care should be taken when using a cold trap not to condense liquid oxygen (a light blue liquid) into the cold trap. Liquid oxygen is potentially explosive, and this is especially true if the trap has been used to trap solvent. Liquid oxygen can be condensed into a cold trap if a pump has sucked air through the trap when the trap is very cold.
Ai UL/CSA certified T40-UL -40°C/°F cold trap features
- ETL tested to UL and CSA standards
- 1.5X more reservoir and 1.6X more trap capacity compare to its predecessor
- No dry ice or liquid nitrogen needed
- All steel housing for durability
- Small footprint, built-in swivel casters for mobility
- Plug and play, no assembly required
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
Questions about the article
Your question:
Personal data:
Continue shopping
T40-UL