Across International 250C UL Certified 1.9 CF Vacuum Oven 5 Sided Heat SST Tubing, AT19-UL, FIVE ALUMINUM SHELVES INCLUDED WITH OVEN PURCHASE. SST (stainless steel) tubing refers to internal tubing and compression, external tubing not included., Introducing the new Ai UL certified 1.9 cubic foot vacuum ovens, this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan.Also come standard is the secondary over-temp protection dial, all stainless steel tubing/compression fittings, stainless steel vacuum/vent valve, oil-filled vacuum gauge, 5 sided pad heating technology and two year warranty. The thermal-conductive aluminum shelves provide excellent temperature uniformity inside the chamber, while our 4th gen LCD low proportional gain temperature controllers keep your oven temperature accurate., AT19 series digital desktop vacuum ovens feature a 1.9 cubic foot easy-to-clean stainless steel chamber with a large dual-layer tempered glass safety window and small footprint. These ovens can greatly reduce drying time by maintaining a consistent vacuum level within the chamber. Every one of our vacuum ovens goes through a 2-time 24-hour vacuum leak test, and is 100% quality controlled in New Jersey or Nevada before leaving our facilities.Attention: Before initial use, run oven at 200C/400F without vacuum for 15 minutes to burn off any residue that may have been introduced during the manufacturing process., IMPORTANT! NEVER LEAVE YOUR OVEN UNATTENDED WHILE OPERATING. Across International is not responsible for any loss of material inside of the oven., FeaturesUL certified.All stainless steel internal tubing & compression fittings provides higher ultimate vacuum, holds vacuum 10 times longer, and require minimum maintenance.Oil-filled mechanical vacuum gauge provides more accurate reading, longer gauge life and minimizes shipping damage.All stainless steel vacuum and vent valves gives you cleaner connection, more accurate control and long term durability.New 5 sided pad heating technology and aluminum shelves provide excellent temperature uniformity and faster heating rates (25% faster in our lab test).Adjustable gas back fill capability with needle valve and vent port.4th gen LCD low proportional gain temperature controllers keep your oven temperature accurate.Best choice for the curing and converting of oil extracts. With deep vacuum level, they can operate at temperatures which allow the degassing/purging process to occur rapidly, thus increase productivity and allow for the production of superior quality products with minimal processing time.Dual layer observation window with 1/2" tempered safety glass.3" thermal insulation prevents heat loss and minimizes the enclosures outer surface temperature.Easy-to-clean stainless steel interior for exceptional durability and ease of maintenance.Built-in alarm alerts you when oven has been shut down by safety circuitry due to out of range temperature.All ovens shipped from our New Jersey or Nevada location for quick delivery, and come with two year warranty and lifetime US-based parts and service support.Guaranteed US based phone and email assistance within 30 minutes from our engineers.Manufactured in accordance with the following standardsUL 61010-1CSA C22.2ISO 9001:2000ISO 12100-1:2003, ISO 12100-2:2003EN1050:1996, EN294:1992, EN60204-1:2006CE

Across International Ai 10L Single or Dual Jacketed Glass Reactor Systems, R10, Ai R-series single/dual jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform and controlled speed. The built-in condenser makes it possible to recover some materials, also at a controlled rate of speed., FeaturesETL tested to UL and CSA standards (optional)Now includes a FREE high quality thermo insulation jacket with open/close viewing window and top/bottom adjustable drawstrings, specially designed and made for Ai glass jacketed reactors. These jackets will extend chiller life, allow you to go down to a lower temperature, and also cut your utility bill.Dual jacketed model allows you to draw vacuum from the outer jacket, thus protects your recirculating fluid temperature and gives you best control over your work. It also help prevents frost to form on the outside of the vessel, allowing you to see clearly into your material.Solvent-resistant PTFE on all sealing components ensures long time durability and operation.All glassware is hand-made from food grade high borosilicate glass that is heat/cold/corrosion-resistant.Adjustable stirring rate provides great torque or high speed.Patented PTFE stirring rod bearing for reliable and quiet operation.Optional multi-layer stirring blades for optimal reaction results.Wide range of temperature operations, from -110F to 400F.Large condenser cooling surface for exceptional condensation performance.Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials.Easily visual operation with digital speed and temperature displays.Heavy duty stainless steel supporting framework with lockable casters for mobility and stability. (whole support and glass vessel shipped pre-assembled)One year warranty and lifetime US-based parts, service, and support.Your safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.

Across International Ai 50L Single or Dual Jacketed Glass Reactor Systems, R50, Ai R-series single/dual jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform and controlled speed. The built-in condenser makes it possible to recover some materials, also at a controlled rate of speed., FeaturesETL tested to UL and CSA standards, CE (optional)Now includes a FREE high quality thermo insulation jacket with open/close viewing window and top/bottom adjustable drawstrings, specially designed and made for Ai glass jacketed reactors. These jackets will extend chiller life, allow you to go down to a lower temperature, and also cut your utility bill.Dual jacketed model allows you to draw vacuum from the outer jacket, thus protects your recirculating fluid temperature and gives you best control over your work. It also help prevents frost to form on the outside of the vessel, allowing you to see clearly into your material.Solvent-resistant PTFE on all sealing components ensures long time durability and operation.All glassware is hand-made from food grade high borosilicate glass that is heat/cold/corrosion-resistant.Adjustable stirring rate provides great torque or high speed.Patented PTFE stirring rod bearing for reliable and quiet operation.Optional multi-layer stirring blades for optimal reaction results.Wide range of temperature operations, from -110F to 400F.Large condenser cooling surface for exceptional condensation performance.Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials.Easily visual operation with digital speed and temperature displays.Heavy duty stainless steel supporting framework with lockable casters for mobility and stability. (whole support and glass vessel shipped pre-assembled)One year warranty and lifetime US-based parts, service, and support.Optional 750W and 1,500W stirring motor, high power controller and stronger motor support upgradeSpecifications: 220V, 50/60Hz, 1~phase, 1,390 rpm, 10.23 N.m torque, 61 dBA noise, IP55 protection, bi-directional, in-door use onlyComponents: 1,500W motor, high power controller and stronger supportYour safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.

Across International Ai 100L Single or Dual Jacketed Glass Reactor, R100, Ai R100 series jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform and controlled speed. The built-in condenser makes it possible to recover some materials, also at a controlled rate of speed., FeaturesETL tested to UL and CSA standards, CENow includes a FREE high quality thermo insulation jacket with open/close viewing window and top/bottom adjustable drawstrings, specially designed and made for Ai glass jacketed reactors. These jackets will extend chiller life, allow you to go down to a lower temperature, and also cut your utility bill.Solvent-resistant PTFE on all sealing components ensures long time durability and operation.Adjustable stirring rate provides great torque or high speed.Patented PTFE stirring rod bearing for reliable and quiet operation.Optional multi-layer stirring blades for optimal reaction results.Large condenser cooling surface for exceptional condensation performance.Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials.Easily visual operation with digital speed and temperature displays.Heavy duty stainless steel supporting framework with lockable casters for mobility and stability. (whole support and glass vessel shipped pre-assembled)Optional 750W and 1,500W stirring motor, high power controller and stronger motor support upgradeSpecifications: 220V, 50/60Hz, 1~phase, 1,390 rpm, 10.23 N.m torque, 61 dBA noise, IP55 protection, bi-directional, in-door use onlyComponents: 1,500W motor, high power controller and stronger supportYour safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.

Across International Ai 20L Single or Dual Jacketed Glass Reactor Systems, R20, Ai R-series single/dual jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform and controlled speed. The built-in condenser makes it possible to recover some materials, also at a controlled rate of speed., FeaturesETL tested to UL and CSA standards, CE (optional)Now includes a FREE high quality thermo insulation jacket with open/close viewing window and top/bottom adjustable drawstrings, specially designed and made for Ai glass jacketed reactors. These jackets will extend chiller life, allow you to go down to a lower temperature, and also cut your utility bill.Dual jacketed model allows you to draw vacuum from the outer jacket, thus protects your recirculating fluid temperature and gives you best control over your work. It also help prevents frost to form on the outside of the vessel, allowing you to see clearly into your material.Solvent-resistant PTFE on all sealing components ensures long time durability and operation.All glassware is hand-made from food grade high borosilicate glass that is heat/cold/corrosion-resistant.Adjustable stirring rate provides great torque or high speed.Patented PTFE stirring rod bearing for reliable and quiet operation.Optional multi-layer stirring blades for optimal reaction results.Wide range of temperature operations, from -110F to 400F.Large condenser cooling surface for exceptional condensation performance.Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials.Easily visual operation with digital speed and temperature displays.Heavy duty stainless steel supporting framework with lockable casters for mobility and stability. (whole support and glass vessel shipped pre-assembled)One year warranty and lifetime US-based parts, service, and support.Your safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.

Across International Ai 150L Single Jacketed Glass Reactor ETL, R150, Ai R150 series jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform and controlled speed. The built-in condenser makes it possible to recover some materials, also at a controlled rate of speed., FeaturesETL certified to UL and CSA standardsIncludes a FREE high quality thermo insulation jacket with open/close viewing window and top/bottom adjustable drawstrings, specially designed and made for Ai glass jacketed reactors. These jackets will extend chiller life, allow you to go down to a lower temperature, and also cut your utility bill.Solvent-resistant PTFE on all sealing components ensures long time durability and operation.Adjustable stirring rate provides great torque or high speed.Patented PTFE stirring rod bearing for reliable and quiet operation.Optional multi-layer stirring blades for optimal reaction results.Large condenser cooling surface for exceptional condensation performance.Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials.Easily visual operation with digital speed and temperature displays.Heavy duty stainless steel supporting framework with lockable casters for mobility and stability. (whole support and glass vessel shipped pre-assembled).Mobile and detachable 316L stainless steel splash bin included.Your safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.

Across International Dual-Jacketed 10L Reactor Vessel for Ai R10 Glass Reactors, R10.Vessel-D, Across International replacement dual-jacketed 10 liter glass reactor vessel, specially made for Across International R10 series 10L jacketed glass reactors.Outer jacket: vacuumInner jacket: thermo fluidVessel mouth diameter: 10.5 inchesGlass material: high borosilicate glass 3.3

Across International Dual-Jacketed 100L Reactor Vessel for Ai R100 Glass Reactors, R100.Vessel-D, Across International replacement dual-jacketed 100 liter glass reactor Vessel, specially made for Across International R100 series 100L jacketed glass reactors.Outer jacket: vacuumInner jacket: thermo fluidVessel mouth diameter: 13.5 inchesGlass material: high borosilicate glass 3.3

Across International Dual-Jacketed 20L Reactor Vessel for Ai R20 Glass Reactors, R20.Vessel-D, Across International replacement dual-jacketed 20 liter glass reactor vessel, specially made for Across International R20 series 20L jacketed glass reactors.Outer jacket: vacuumInner jacket: thermo fluidVessel mouth diameter: 10.5 inchesGlass material: high borosilicate glass 3.3

Across International Dual-Jacketed 50L Reactor Vessel for Ai R50 Glass Reactors, R50.Vessel-D, Across International replacement dual-jacketed 50 liter glass reactor Vessel, specially made for Across International R50 series 50L jacketed glass reactors.Outer jacket: vacuumInner jacket: thermo fluidVessel mouth diameter: 13.5 inchesGlass material: high borosilicate glass 3.3

Across International Single-Jacketed 50L Reactor Vessel for Ai R50 Glass Reactors, R50.Vessel-S, Across International replacement single-jacketed 50 liter glass reactor vessel, specially made for Across International R50 series 50L jacketed glass reactors.Vessel mouth diameter: 10.5 inchesGlass material: high borosilicate glass 3.3

Across International Single-Jacketed 10L Reactor Vessel for Ai R10 Glass Reactors, R10.Vessel-S, Across International replacement single-jacketed 10 liter glass reactor vessel, specially made for Across International R10 series 10L jacketed glass reactors.Vessel mouth diameter: 10.5 inchesGlass material: high borosilicate glass 3.3

Across International Single-Jacketed 20L Reactor Vessel for Ai R20 Glass Reactors, R20.Vessel-S, Across International replacement single-jacketed 20 liter glass reactor vessel, specially made for Across International R20 series 20L jacketed glass reactors.Vessel mouth diameter: 10.5 inchesGlass material: high borosilicate glass 3.3

Across International Single-Jacketed 100L Reactor Vessel for Ai R100 Glass Reactors, R100.Vessel-S, Across International replacement single-jacketed 100 liter glass reactor vessel, specially made for Across International R100 series 100L jacketed glass reactors.Vessel mouth diameter: 13.5 inchesGlass material: high borosilicate glass 3.3Weight: approx. 70 Lbs

Across International Single-Jacketed 150L Reactor Vessel for Ai R150 Glass Reactors, R150.Vessel-S, Across International replacement single-jacketed 150 liter glass reactor Vessel, specially made for Across International R150 series 150L jacketed glass reactors.Vessel mouth diameter: 13.5 inchesGlass material: high borosilicate glass 3.3Weight: approx. 100 Lbs

Across International Non-Jacketed 50L Reactor Vessel for Ai R50 Glass Reactors, R50.Vessel-N, Across International replacement non-jacketed 50 liter glass reactor vessel, specially made for Across International R50 series 50L glass reactors.Vessel mouth diameter: 13.5 inchesGlass material: high borosilicate glass 3.3

Across International Non-Jacketed 20L Reactor Vessel for Ai R20 Glass Reactors, R20.Vessel-N, Across International replacement non-jacketed 20 liter glass reactor vessel, specially made for Across International R20 series 20L glass reactors.Vessel mouth diameter: 10.5 inchesGlass material: high borosilicate glass 3.3

Across International Non-Jacketed 100L Reactor Vessel for Ai R100 Glass Reactors, R100.Vessel-N, Across International replacement non-jacketed 100 liter glass reactor vessel, specially made for Across International R100 series 100L glass reactors.Vessel mouth diameter: 13.5 inchesGlass material: high borosilicate glass 3.3

Across International Condenser Set with 20L Receiving Flask for Ai Glass Reactors, R100-CondenserSet, Condenser set with 20L receiving flask for Across International 10L, 20L, 50L and 100L glass reactors

Across International Ai 100L Jacket Reactor with Explosion-Proof Motor/Controller 220V, R100ex, What does Explosion Proof mean?, The term explosion proof describes electrical and non-electrical fixtures that can prevent explosions from occurring. An electrical product that is marked explosion proof means that this product has an apparatus enclosed in a case that is capable of withstanding an explosion of a specific gas or vapor that may occur within it. It also has the capability of preventing the ignition of a specified gas or vapor surrounding the enclosure by sparks, flashes, or explosion of the gas or vapor within, and that it operates at such an external temperature that a surrounding flammable atmosphere will not be ignited., To meet the criteria for the explosion proof rating, an enclosure must be able to contain any explosion originating within its housing and prevent sparks from within its housing from igniting vapors, gases, dust, or fibers in the air surrounding it. Therefore, explosion proof, when referring to electrical enclosures, does not mean that it is able to withstand an exterior explosion. Instead, it is the enclosures ability to prevent an internal spark or explosion from causing a much larger blast., Ai jacketed reactors with Explosion-Proof motor, controller and power management, Ai R100ex series jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform and controlled speed. The built-in condenser makes it possible to recover some materials, also at a controlled rate of speed., FeaturesPSI peer reviewed to be used in a C1D1 environment.Includes a thermo insulation jacket with open/close viewing window and top/bottom adjustable drawstrings, specially designed and made for Ai glass jacketed reactors. These jackets will extend chiller life, allow you to go down to a lower temperature, and also cut your utility bill.Solvent-resistant PTFE on all sealing components ensures long time durability and operation.Adjustable stirring rate provides great torque or high speed.Patented PTFE stirring rod bearing for reliable and quiet operation.Optional multi-layer stirring blades for optimal reaction results.Large condenser cooling surface for exceptional condensation performance.Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials.Easily visual operation with digital speed and temperature displays.Heavy duty stainless steel supporting framework with lockable casters for mobility and stability. (whole support and glass vessel shipped pre-assembled)Your safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.

Across International Ai 10L Jacket Reactor with Explosion-Proof Motor & Controller 220V, R10ex, What does Explosion Proof mean?, The term explosion proof describes electrical and non-electrical fixtures that can prevent explosions from occurring. An electrical product that is marked explosion proof means that this product has an apparatus enclosed in a case that is capable of withstanding an explosion of a specific gas or vapor that may occur within it. It also has the capability of preventing the ignition of a specified gas or vapor surrounding the enclosure by sparks, flashes, or explosion of the gas or vapor within, and that it operates at such an external temperature that a surrounding flammable atmosphere will not be ignited., To meet the criteria for the explosion proof rating, an enclosure must be able to contain any explosion originating within its housing and prevent sparks from within its housing from igniting vapors, gases, dust, or fibers in the air surrounding it. Therefore, explosion proof, when referring to electrical enclosures, does not mean that it is able to withstand an exterior explosion. Instead, it is the enclosures ability to prevent an internal spark or explosion from causing a much larger blast., Ai jacketed reactors with Explosion-Proof motor, controller and power management, Ai R10ex series jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform and controlled speed. The built-in condenser makes it possible to recover some materials, also at a controlled rate of speed., FeaturesPSI peer reviewed to be used in a C1D1 environment.Thermo insulation jacket with open/close viewing window and top/bottom adjustable drawstrings, specially designed and made for Ai glass jacketed reactors. These jackets will extend chiller life, allow you to go down to a lower temperature, and also cut your utility bill.Dual jacketed model allows you to draw vacuum from the outer jacket, thus protects your recirculating fluid temperature and gives you best control over your work. It also help prevents frost to form on the outside of the vessel, allowing you to see clearly into your material.Solvent-resistant PTFE on all sealing components ensures long time durability and operation.All glassware is hand-made from food grade high borosilicate glass that is heat/cold/corrosion-resistant.Adjustable stirring rate provides great torque or high speed.Patented PTFE stirring rod bearing for reliable and quiet operation.Optional multi-layer stirring blades for optimal reaction results.Wide range of temperature operations, from -110F to 400F.Large condenser cooling surface for exceptional condensation performance.Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials.Easily visual operation with digital speed and temperature displays.Heavy duty stainless steel supporting framework with lockable casters for mobility and stability. (whole support and glass vessel shipped pre-assembled)One year warranty and lifetime US-based parts, service, and support.Your safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.

Across International Ai 20L Jacket Reactor with Explosion-Proof Motor & Controller 220V, R20ex, What does Explosion Proof mean?, The term explosion proof describes electrical and non-electrical fixtures that can prevent explosions from occurring. An electrical product that is marked explosion proof means that this product has an apparatus enclosed in a case that is capable of withstanding an explosion of a specific gas or vapor that may occur within it. It also has the capability of preventing the ignition of a specified gas or vapor surrounding the enclosure by sparks, flashes, or explosion of the gas or vapor within, and that it operates at such an external temperature that a surrounding flammable atmosphere will not be ignited., To meet the criteria for the explosion proof rating, an enclosure must be able to contain any explosion originating within its housing and prevent sparks from within its housing from igniting vapors, gases, dust, or fibers in the air surrounding it.Therefore, explosion proof, when referring to electrical enclosures, does not mean that it is able to withstand an exterior explosion. Instead, it is the enclosures ability to prevent an internal spark or explosion from causing a much larger blast., Ai jacketed reactors with Explosion-Proof motor, controller and power management, Ai R20ex series jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform and controlled speed. The built-in condenser makes it possible to recover some materials, also at a controlled rate of speed., FeaturesPSI peer reviewed to be used in a C1D1 environment.Thermo insulation jacket with open/close viewing window and top/bottom adjustable drawstrings, specially designed and made for Ai glass jacketed reactors. These jackets will extend chiller life, allow you to go down to a lower temperature, and also cut your utility bill.Dual jacketed model allows you to draw vacuum from the outer jacket, thus protects your recirculating fluid temperature and gives you best control over your work. It also help prevents frost to form on the outside of the vessel, allowing you to see clearly into your material.Solvent-resistant PTFE on all sealing components ensures long time durability and operation.All glassware is hand-made from food grade high borosilicate glass that is heat/cold/corrosion-resistant.Adjustable stirring rate provides great torque or high speed.Patented PTFE stirring rod bearing for reliable and quiet operation.Optional multi-layer stirring blades for optimal reaction results.Wide range of temperature operations, from -110F to 400F.Large condenser cooling surface for exceptional condensation performance.Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials.Easily visual operation with digital speed and temperature displays.Heavy duty stainless steel supporting framework with lockable casters for mobility and stability. (whole support and glass vessel shipped pre-assembled)One year warranty and lifetime US-based parts, service, and support.Your safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.

Across International Ai 50L Jacket Reactor with Explosion-Proof Motor & Controller 220V, R50ex, What does Explosion Proof mean?, The term explosion proof describes electrical and non-electrical fixtures that can prevent explosions from occurring. An electrical product that is marked explosion proof means that this product has an apparatus enclosed in a case that is capable of withstanding an explosion of a specific gas or vapor that may occur within it. It also has the capability of preventing the ignition of a specified gas or vapor surrounding the enclosure by sparks, flashes, or explosion of the gas or vapor within, and that it operates at such an external temperature that a surrounding flammable atmosphere will not be ignited., To meet the criteria for the explosion proof rating, an enclosure must be able to contain any explosion originating within its housing and prevent sparks from within its housing from igniting vapors, gases, dust, or fibers in the air surrounding it. Therefore, explosion proof, when referring to electrical enclosures, does not mean that it is able to withstand an exterior explosion. Instead, it is the enclosures ability to prevent an internal spark or explosion from causing a much larger blast., Vacuum Pump, Ex-proof vacuum pump (tubing & adapters only included in complete turnkey systems), Ai jacketed reactors with Explosion-Proof motor, controller and power management, Ai R50ex series jacketed glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment. Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform and controlled speed. The built-in condenser makes it possible to recover some materials, also at a controlled rate of speed., FeaturesPSI peer reviewed to be used in a C1D1 environment.Thermo insulation jacket with open/close viewing window and top/bottom adjustable drawstrings, specially designed and made for Ai glass jacketed reactors. These jackets will extend chiller life, allow you to go down to a lower temperature, and also cut your utility bill.Dual jacketed model allows you to draw vacuum from the outer jacket, thus protects your recirculating fluid temperature and gives you best control over your work. It also help prevents frost to form on the outside of the vessel, allowing you to see clearly into your material.Solvent-resistant PTFE on all sealing components ensures long time durability and operation.All glassware is hand-made from food grade high borosilicate glass that is heat/cold/corrosion-resistant.Adjustable stirring rate provides great torque or high speed.Patented PTFE stirring rod bearing for reliable and quiet operation.Optional multi-layer stirring blades for optimal reaction results.Wide range of temperature operations, from -110F to 400F.Large condenser cooling surface for exceptional condensation performance.Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials.Easily visual operation with digital speed and temperature displays.Heavy duty stainless steel supporting framework with lockable casters for mobility and stability. (whole support and glass vessel shipped pre-assembled)One year warranty and lifetime US-based parts, service, and support.Your safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.

Across International Ai 100L Single Jacketed Filter Glass Reactor, R100f, The Ai jacketed filter glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment, jacketed filter reactors can be used for single or multi-step reactions and filtrations in the same vessel, production and process scale peptide synthesis. Filter base eliminates material transfers and significantly reduces material losses.Each reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform and controlled speed. The built-in condenser makes it possible to recover some materials, also at a controlled rate of speed., FeaturesETL tested to UL and CSA standards, CE (optional)Filter reactors for single or multi-step reactions and filtrations in the same vessel, they also eliminate material transfers and reduce losses.Modular filter assembly can be easily detached for cleaning and filter paper replacement.Center downward drain port with angled drain grooves allows easy material drainage.All PTFE filter components ensure clean and long lifespan operations.Now includes a FREE high quality thermo insulation jacket with open/close viewing window and top/bottom adjustable drawstrings, specially designed and made for Ai glass jacketed reactors. These jackets will extend chiller life, allow you to go down to a lower temperature, and also cut your utility bill.Solvent-resistant PTFE on all sealing components ensures long time durability and operation.All glassware is hand-made from food grade high borosilicate glass that is heat/cold/corrosion-resistant.Adjustable stirring rate provides great torque or high speed.Patented PTFE stirring rod bearing for reliable and quiet operation.Optional multi-layer stirring blades for optimal reaction results.Wide range of temperature operations, from -110F to 400F.Large condenser cooling surface for exceptional condensation performance.Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials.Easily visual operation with digital speed and temperature displays.Heavy duty stainless steel supporting framework with lockable casters for mobility and stability. (whole support and glass vessel shipped pre-assembled)One year warranty and lifetime US-based parts, service, and support.Your safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.

Across International Ai 20L Single or Dual Jacketed Filter Glass Reactor, R20f, The Ai jacketed filter glass reactors are designed for synthetic reaction of different types of materials in a controlled temperature and vacuum environment, jacketed filter reactors can be used for single or multi-step reactions and filtrations in the same vessel, production and process scale peptide synthesis. Filter base eliminates material transfers and significantly reduces material losses.Each Ai reactor features adjustable stirring speeds and a constant pressure feeding funnel that allows you to add material to the vessel at a uniform and controlled speed. The built-in condenser makes it possible to recover some materials, also at a controlled rate of speed., FeaturesETL tested to UL and CSA standards, CE (optional)Filter reactors for single or multi-step reactions and filtrations in the same vessel, they also eliminate material transfers and reduce losses.Modular filter assembly can be easily detached for cleaning and filter paper replacement.Center downward drain port with angled drain grooves allows easy material drainage.All PTFE filter components ensure clean and long lifespan operations.Solvent-resistant PTFE on all sealing components ensures long time durability and operation.All glassware is hand-made from food grade high borosilicate glass that is heat/cold/corrosion-resistant.Adjustable stirring rate provides great torque or high speed.Patented PTFE stirring rod bearing for reliable and quiet operation.Optional multi-layer stirring blades for optimal reaction results.Wide range of temperature operations, from -110F to 400F.Large condenser cooling surface for exceptional condensation performance.Rugged stainless steel reinforced PTFE stirrer with anchored agitator, suitable for a wide range of viscous materials.Easily visual operation with digital speed and temperature displays.Heavy duty stainless steel supporting framework with lockable casters for mobility and stability. (whole support and glass vessel shipped pre-assembled)One year warranty and lifetime US-based parts, service, and support.Your safety is important to us! Please use caution when operating. Users of glass reaction equipment must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.