Manufacturer: |
Across International
|
Supplier number: | WAC-1 |
Technical specs:
- Model: WAC-1
- Input power: 110 VAC 60 Hz single-phase (1PH) 1460 watts
- Nominal cooling
- Capacity: 1935 kcal/h
- Nominal cooling
- Capacity: Nominal cooling capacity is according to: Inlet chilled fluid temperature: 12°C Outlet chilled fluid temperature: 7°C Inlet cooling air temperature: 30°C Outlet cooling air temperature: 35°C Compressor:
- Make: Panasonic, UL Listed Power: 110VAC 60Hz 1-PH, LRA42, thermally protected Refrigerant: R410A (800g) Number of compressor installed: one
- Water pump: Make: LX (CMFL2-20-A-W-G-BABE)
- Power: 110VAC 60Hz 1-PH 370 watts 3.7A 3450 rpm IP55 Flow rate: 528 gallons per hour Max pressure: 10 bar. H(max); 20.5m, H(n): 16m
- Reservoir volume: 4.5 gallons
- Cooling fan: Make: Kunli (YWF A2S-300S-5DIIIA05)
- Power: 110VAC 60Hz 1-PH 155 watts 1.35A 2700rpm 16uF/500V IP44 Flow rate: 70,000 cu ft per hour Number of fan installed: one
- Temperature accuracy: +/- 2 °C
- Recommended coolant: Distilled water
- Water inlet & outlet on chiller: KF40 flange
- Manifold: Inlet: KF40, outlet: 8mm quick connect with ball valve
- Unit/shipping weight: 200 Lb / 260 Lb
- Unit/shipping dimensions: 29 x 17 x 35" / 36 x 21 x 42" (DxWxH)
- Safety: Over current and compressor thermal protection
- Working environment: Temperature range of chilled fluid: 5°C - 35°C Temperature difference of chilled fluid between inlet and outlet: 3°C - 8°C. It is better to use the chiller while the ambient temperature at or below 35°C
- Compatiable Ai induction heaters: High frequency 4kW, 6.6kW Mid frequency 15kW, 25kW Low frequency 15kW
- CE compliant: Yes
Across International Ai 10°C to 25°C 33L/Min 17L Capacity Recirculating Chiller, WAC-1 Ai WAC-1...more
Across International Ai 10°C to 25°C 33L/Min 17L Capacity Recirculating Chiller, WAC-1
Ai WAC-1 digital temperature controlled recirculating water chiller with built-in swivel casters, recommended for our IH series induction heaters. These chillers have built-in stainless steel tank and water pump for durability and rust-free operation. Two sets of water manifolds included for immediate use.
Ai WAC-1 digital temperature controlled recirculating water chiller with built-in swivel casters, recommended for our IH series induction heaters. These chillers have built-in stainless steel tank and water pump for durability and rust-free operation. Two sets of water manifolds included for immediate use.
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
AC-97
You will receive your personal $15 voucher with your order confirmation
Spend over $200 and get a $15 voucher for your next order
$15
$3,231.90 *
$8,086.21 *
(60.03% Saved)
Free shipping!
Delivery time 9-11 business days
Type:
Secure payment
Across International Ai 10°C to 25°C 33L/Min 17L Capacity Recirculating Chiller, WAC-1
Add this item and enjoy fast shipping
Popular product! About people already have it in their shopping cart
Free SHIPPING - Directly from the manufacturer!
Top seller in the store!
Proven product
Top international brands already trust us!
Secure shopping
- Free shipping from $50
- Fast delivery
- Your personal buyer protection
Manufacturer: |
Across International
|
Supplier number: | WAC-1 |
Technical specs:
- Model: WAC-1
- Input power: 110 VAC 60 Hz single-phase (1PH) 1460 watts
- Nominal cooling
- Capacity: 1935 kcal/h
- Nominal cooling
- Capacity: Nominal cooling capacity is according to: Inlet chilled fluid temperature: 12°C Outlet chilled fluid temperature: 7°C Inlet cooling air temperature: 30°C Outlet cooling air temperature: 35°C Compressor:
- Make: Panasonic, UL Listed Power: 110VAC 60Hz 1-PH, LRA42, thermally protected Refrigerant: R410A (800g) Number of compressor installed: one
- Water pump: Make: LX (CMFL2-20-A-W-G-BABE)
- Power: 110VAC 60Hz 1-PH 370 watts 3.7A 3450 rpm IP55 Flow rate: 528 gallons per hour Max pressure: 10 bar. H(max); 20.5m, H(n): 16m
- Reservoir volume: 4.5 gallons
- Cooling fan: Make: Kunli (YWF A2S-300S-5DIIIA05)
- Power: 110VAC 60Hz 1-PH 155 watts 1.35A 2700rpm 16uF/500V IP44 Flow rate: 70,000 cu ft per hour Number of fan installed: one
- Temperature accuracy: +/- 2 °C
- Recommended coolant: Distilled water
- Water inlet & outlet on chiller: KF40 flange
- Manifold: Inlet: KF40, outlet: 8mm quick connect with ball valve
- Unit/shipping weight: 200 Lb / 260 Lb
- Unit/shipping dimensions: 29 x 17 x 35" / 36 x 21 x 42" (DxWxH)
- Safety: Over current and compressor thermal protection
- Working environment: Temperature range of chilled fluid: 5°C - 35°C Temperature difference of chilled fluid between inlet and outlet: 3°C - 8°C. It is better to use the chiller while the ambient temperature at or below 35°C
- Compatiable Ai induction heaters: High frequency 4kW, 6.6kW Mid frequency 15kW, 25kW Low frequency 15kW
- CE compliant: Yes
Across International Ai 10°C to 25°C 33L/Min 17L Capacity Recirculating Chiller, WAC-1 Ai WAC-1...more
Across International Ai 10°C to 25°C 33L/Min 17L Capacity Recirculating Chiller, WAC-1
Ai WAC-1 digital temperature controlled recirculating water chiller with built-in swivel casters, recommended for our IH series induction heaters. These chillers have built-in stainless steel tank and water pump for durability and rust-free operation. Two sets of water manifolds included for immediate use.
Ai WAC-1 digital temperature controlled recirculating water chiller with built-in swivel casters, recommended for our IH series induction heaters. These chillers have built-in stainless steel tank and water pump for durability and rust-free operation. Two sets of water manifolds included for immediate use.
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
Questions about the article
Your question:
Personal data:
Continue shopping
WAC-1