Maruson Technology 420VA Standby Uninterruptible Power Supply Unit, 8 Outlets, POP-420B, 851484006428Capacity: 420VA / 210WTopology: StandbyWaveform: Simulated sine waveOutlets: 8Features: Microprocessor controlledSupports APFC equipmentAuto restart while AC is recoveringWall mountable & friendly battery swap designDC cold start functionThe Power Personal standby UPS provides cost-effective protection for electronic devices from brief blackouts, brownouts, and surges. In the event of an extended blackout, the battery-backed outlets give you some time to safely shut down your computer. The wall-mountable design provides flexible setup options to save desktop space.Typical Applications:LaptopsWorkstationsGaming consolesPersonal electronicsPoint-of-sale devicesSurveillance systemsHome networking devicesSmart home devicesPhone systemsMain Features: (4) Battery-Backed Outlets with Surge SuppressionThese outlets keep critical electronics online during a temporary blackout and protect connected equipment from power surges and voltage spikes.(4) Surge-Protected OutletsConnect non-critical equipment to these outlets to protect the equipment from power surges and voltage spikes.(2) Transformer-Spaced OutletsPlug your oversized plugs into these outlets.Microprocessor-Controlled OperationGuarantees high reliability of the UPS by having all functions of the unit controlled and monitored by a microprocessor.Cold Start CapableTurn on the UPS even without utility power as long as there is sufficient battery power.Auto-Restart During AC RecoveryOnce power returns to normal and the battery levels are sufficient, the UPS will automatically restart.Off-Mode ChargingThe UPS continues charging the internal batteries when powered off as long as the unit is plugged into an AC mains wall socket.Mountable DesignTwo keyhole slots on the back of the UPS allow for mounting on a wall or desk to save desktop space.Enable / Disable Audible AlarmEnable or disable the audible alert for your unit.To enable or disable the audible alarm, turn the LCD screen on first then press the button twice quickly. The UPS will beep once the alarm is enabled. The default setting for the audible alarm is enabled. If the alarm is disabled, no audible alert will be made when the UPS reaches a low battery state.LED Status IndicatorsLEDs illuminate to indicate different UPS power conditions.Warranty (US & Canada)3-year equipment warranty, 2-year battery warranty, and 3-year connected equipment warranty with production registration.WARNING:This product can expose you to chemicals including bisphenol A (BPA) and styrene (ABS) which are known to the State of California to cause harm and cancer. The battery in this product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Maruson Technology 1000VA Line-Interactive Uninterruptible Power Supply Unit with AVR and Software, 8 Outlets, PRO-1000LCD, 851484006473Capacity: 1000VA / 600WTopology: Line-interactiveWave Form: Simulated sine waveOutlets: 8Features: AVR for battery-backed outletsSurge suppressionAuto restart while AC is recoveringOff-mode chargingPower management softwarePhone / fax / network combo portsThe PowerPro LCD UPS Series offers line-interactive topology along with automatic voltage regulation, transient surge suppression, and sufficient battery backup time for temporary power outages while protecting connected equipment against blackouts, brownouts, overvoltages, transient surges, spikes, and data line noise. In the event of a prolonged power outage, the internal battery provides temporary power so connected equipment can be properly shut down and in doing so, protects the equipment from hardware damage and data loss from the system crashes. Use the included software to connect the UPS to your computer for expanded control and monitoring. The compact tower form factor is perfect for desktops or floorspace without taking up too much room.Typical Applications:Mid-level computersWorkstationsGaming consolesHome networking devicesPoint-of-sale devicesSurveillance systemsHome theater electronicsSecurity systemsVoIP / PBX systemsMain Features: (4) Battery-Backed Outlets with AVR Function and Surge ProtectionThese outlets keep critical electronics online during a temporary blackout, adjust minor voltage fluctuations, and offer protection from power surges and voltage spikes. If a blackout occurs or a power disruption beyond the tolerance range is detected, the UPS will switch over to battery power and supply these outlets with power. Connect mission-critical electronics to these outlets.(4) Surge-Protected OutletsConnect non-critical equipment to these outlets to protect the equipment from power surges and voltage spikes.Automatic Voltage Regulation (AVR)Automatically boosts or bucks minor voltage irregularities instead of switching to battery backup mode. By regulating the output voltage rather than using the battery, the UPS prolongs the lifespan of your battery and protects connected equipment against spikes, surges, brownouts, minor overvoltages and under voltages, and temporary blackouts.The more boosts and bucks there are, the wider the acceptable input voltage range is, which will decrease the need to switch to battery power, therefore prolonging the lifespan of your battery. This series offers two-step boost and one-step buck AVR functions.Overload ProtectionProtects the UPS from an overload. If the circuit breaker trips, unplug a few electronics before resetting the circuit breaker and turning your unit back on.Smart Battery ManagementMaximize battery performance and lifespan with an intelligent, multi-stage battery charging system to auto-sense the optimal battery charging performance based on battery levels.Power Management SoftwareMonitor and control the UPS from your computer with the included user-friendly software to automate computer shutdown, monitor battery levels, set UPS parameters, receive alerts of abnormalities, and more.Phone / Network / Fax Line Suppression (RJ-11/45 Ports)Protects telephone, network, or fax lines from line surges. Connect one line into the jack from the source and one line from the out jack to your phone, network, or fax line.Cold Start CapableTurn on the UPS even without utility power as long as there is sufficient battery power.Auto-Restart During AC RecoveryOnce power returns to normal and the battery levels are sufficient, the UPS will automatically restart.Off-Mode ChargingThe UPS continues charging the internal batteries when powered off as long as the unit is plugged into an AC mains wall socket.LCD ScreenSee real-time status information of your UPS power conditions including the voltages, battery level, fault detected, and more.Enable / Disable Audible AlarmEnable or disable the audible alert for your unit.To enable or disable the audible alarm, turn the LCD screen on first then press the button twice quickly. The UPS will beep once the alarm is enabled. The default setting for the audible alarm is enabled. If the alarm is disabled, no audible alert will be made when the UPS reaches a low battery state.Warranty (US & Canada)3-year equipment warranty, 2-year battery warranty, and 3-year connected equipment warranty with product registration.WARNING:This product can expose you to chemicals including bisphenol A (BPA) and styrene (ABS) which are known to the State of California to cause harm and cancer. The battery in this product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Maruson Technology 1000VA Online Uninterruptible Power Supply Unit, 4 Outlets, TAC-LV1K, 858725000719Capacity: 1000VA / 900WTopology: Online double-conversionWave Form: Sine waveOutlets: 4Features: Sine wave outputDSP technologyActive PFC0.9 power factorWide input voltage range (55-150Vac)1% output voltage regulationIntelligent slot for an optional network cardECO ModeOptional external battery bankThe Tacoma series is a true double-conversion online UPS with pure sine wave output delivering reliable power protection for mission-critical equipment using DSP control for optimal performance. The high 0.9 power factor allows for higher load capacity while a wide input voltage range improves the reliability of the UPS. A 1% output voltage regulation delivers more precise power to connected equipment.Typical Applications:Mid-size serversATMsLab equipmentNetworking devicesSurveillance systemsVoIP / PBX systemsSecurity systemsGaming computersSlot machinesMain Features: (4) Battery-Backed Outlets with Surge ProtectionThese outlets keep critical electronics online during a temporary blackout and offer protection from power surges and voltage spikes. If a blackout occurs or a power disruption beyond the tolerance range is detected, the UPS will switch over to battery power and supply these outlets with power.True Double-Conversion Online TopologyThe main supply is fed directly into the UPS and charges batteries within the UPS. The battery power is then converted back to the main power to feed the protected equipment.Zero Transfer TimeTrue online double-conversion topology for zero transfer time from Line Mode to Battery Mode in case of a power disturbance prevents malfunction of mission-critical equipment.Pure Sine Wave OutputBest waveform for sensitive electronics.Benefits include:Smoother waveformBest for sensitive equipmentHigher quality than a modified sine waveMaintains voltage at a safe levelMotors run at their intended speed and with less heatEquipment runs with less noiseIT equipment lasts longerLow harmonic distortionDSP Controlled TechnologyDSP (digital signal processor) controlled technology for high reliability, accuracy, and efficiency.Active PFC to Improve Power FactorActive PFC (power factor correction) improves the power factor and power quality of the UPS by reducing harmonic distortion on the electrical system to improve energy efficiency and reduce energy loss. Additional benefits include active wave shaping of input current, low voltage drop, filtering high frequency switching, waveform control through feedback sensing from the power source, and regulation of output voltage based on feedback control.1% Output Voltage RegulationThe UPS regulates the output voltage to be within 1% of the set output voltage. Voltages outside acceptable ranges can cause electronics and electrical components to overheat and may cause premature failure of the devices.The voltage reference of this UPS is set to a fixed 1% output voltage regulation even when parameters such as ambient temperature change. A precise output voltage is important for sensitive electronic equipment such as ones that require calibration for accuracy and also sensitive electronics are more susceptible to damage when receiving power outside its input range.Wide Input Voltage RangeMinimizes the need to switch over to battery power and frequency of battery charge and recharge cycles by correcting extreme voltage distortion for higher system reliability.EMI / RFI FilterEMI / RFI filter suppresses electromagnetic noise and radio frequency interference transmitted from AC power.Advanced Battery ManagementMaximize battery performance and lifespan with an intelligent, multi-stage battery charging system to auto-sense the optimal battery charging performance based on battery levels.Overload ProtectionProtects the UPS from an overload. If the circuit breaker trips, unplug a few electronics before resetting the circuit breaker and turning your unit back on.Set Output Voltage and Frequency (for Battery Mode)The output voltage can be set to 100 / 110 / 115 / 120Vac and the frequency can be set to either 50Hz or 60Hz for better performance with sensitive electronics when the UPS runs on battery power. In Line Mode or ECO Mode, the UPS output voltage and frequency synchronize with the input voltage and frequency.NOTE:Setting the UPS output to 50Hz will derate the UPS capacity by 40%. For this UPS, the capacity will be cut down to 540W maximum output capacity.Cold Start CapableTurn on the UPS even without utility power as long as there is sufficient battery power.Auto-Restart During AC RecoveryOnce power returns to normal and the battery levels are sufficient, the UPS will automatically restart.Off-Mode ChargingThe UPS continues charging the internal batteries when powered off as long as the unit is plugged into an AC mains wall socket.Power Management SoftwareMonitor and control the UPS from your computer with the included user-friendly software to automate computer shutdown, monitor battery levels, set UPS parameters, receive alerts of abnormalities, and more.LCD ScreenSee real-time status information of your UPS power conditions including the voltages, battery level, fault detected, and more.Emergency Power Off (EPO) TabInstantly shut off the UPS and prevent the UPS from supplying power in the event of an emergency.Mute Audible AlarmTemporarily mute the audible alarm from your UPS by pressing the ON button when audible alerts are ongoing. The mute setting is reset once the UPS returns to a normal state for the next time unusual activity is detected.Optional Accessories (Not Included)Network Management Card - For remote power monitoring. See model number #NMC for compatibility with this UPS series.Add-On External Battery Banks - Extend the battery runtime in the event of an extended power outage. See model # TAC-LV1KBB for compatibility with this UPS series. Maximum 3 x TAC-LV1BB may be used.Warranty (US & Canada)2-year equipment warranty, 2-year battery warranty, and 2-year connected equipment warranty with product registration. See Terms and Conditions and Warranty Policy pages for additional information.WARNING:The batteries, battery posts, terminals, and related accessories can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. Wash hands after handling. For more information, go to www.p65warnings.ca.gov.
Maruson Technology 2000VA Online Uninterruptible Power Supply Unit with Terminal, 6 Outlets, TAC-LV2K, 858725000702Capacity: 2000VA / 1800WTopology: Online double-conversionWave Form: Sine waveOutlets: 6 + terminalFeatures: Sine wave outputDSP technologyActive PFC0.9 power factorWide input voltage range (55-150Vac)1% Output voltage regulationLoad segment controlIntelligent slot for an optional network cardECO ModeOptional external battery bankThe Tacoma series is a true double-conversion online UPS with pure sine wave output delivering reliable power protection for mission-critical equipment using DSP control for optimal performance. The high 0.9 power factor allows for higher load capacity while a wide input voltage range improves the reliability of the UPS. A 1% output voltage regulation delivers more precise power to connected equipment.Typical Applications:Mid-size serversATMsLab equipmentNetworking devicesSurveillance systemsVoIP / PBX systemsSecurity systemsGaming computersSlot machinesMain Features: (6) Battery-Backed Outlets + (1) Terminal with Surge ProtectionThese outlets keep critical electronics online during a temporary blackout and offer protection from power surges and voltage spikes. If a blackout occurs or a power disruption beyond the tolerance range is detected, the UPS will switch over to battery power and supply these outlets with power.True Double-Conversion Online TopologyThe main supply is fed directly into the UPS and charges batteries within the UPS. The battery power is then converted back to the main power to feed the protected equipment.Zero Transfer TimeTrue online double-conversion topology for zero transfer time from Line Mode to Battery Mode in case of a power disturbance prevents malfunction of mission-critical equipment.Pure Sine Wave OutputBest waveform for sensitive electronics.Benefits include:Smoother waveformBest for sensitive equipmentHigher quality than a modified sine waveMaintains voltage at a safe levelMotors run at their intended speed and with less heatEquipment runs with less noiseIT equipment lasts longerLow harmonic distortionDSP Controlled TechnologyDSP (digital signal processor) controlled technology for high reliability, accuracy, and efficiency.Active PFC to Improve Power FactorActive PFC (power factor correction) improves the power factor and power quality of the UPS by reducing harmonic distortion on the electrical system to improve energy efficiency and reduce energy loss. Additional benefits include active wave shaping of input current, low voltage drop, filtering high frequency switching, waveform control through feedback sensing from the power source, and regulation of output voltage based on feedback control.1% Output Voltage RegulationThe UPS regulates the output voltage to be within 1% of the set output voltage. Voltages outside acceptable ranges can cause electronics and electrical components to overheat and may cause premature failure of the devices.The voltage reference of this UPS is set to a fixed 1% output voltage regulation even when parameters such as ambient temperature change. A precise output voltage is important for sensitive electronic equipment such as ones that require calibration for accuracy and also sensitive electronics are more susceptible to damage when receiving power outside its input range.Wide Input Voltage RangeMinimizes the need to switch over to battery power and frequency of battery charge and recharge cycles by correcting extreme voltage distortion for higher system reliability.EMI / RFI FilterEMI / RFI filter suppresses electromagnetic noise and radio frequency interference transmitted from AC power.Advanced Battery ManagementMaximize battery performance and lifespan with an intelligent, multi-stage battery charging system to auto-sense the optimal battery charging performance based on battery levels.Overload ProtectionProtects the UPS from an overload. If the circuit breaker trips, unplug a few electronics before resetting the circuit breaker and turning your unit back on.Load Segment ControlControl grouped outlets allows better management of battery power by prioritizing mission-critical devices by manual or pre-setting. This allows mission-critical devices to have longer backup time than non-mission-critical devices.Set Output Voltage and Frequency (for Battery Mode)The output voltage can be set to 100 / 110 / 115 / 120Vac and the frequency can be set to either 50Hz or 60Hz for better performance with sensitive electronics when the UPS runs on battery power. In Line Mode or ECO Mode, the UPS output voltage and frequency synchronize with the input voltage and frequency.NOTE:Setting the UPS output to 50Hz will derate the UPS capacity by 40%. For this UPS, the capacity will be cut down to 1080W maximum output capacity.Cold Start CapableTurn on the UPS even without utility power as long as there is sufficient battery power.Auto-Restart During AC RecoveryOnce power returns to normal and the battery levels are sufficient, the UPS will automatically restart.Off-Mode ChargingThe UPS continues charging the internal batteries when powered off as long as the unit is plugged into an AC mains wall socket.Power Management SoftwareMonitor and control the UPS from your computer with the included user-friendly software to automate computer shutdown, monitor battery levels, set UPS parameters, receive alerts of abnormalities, and more.LCD ScreenSee real-time status information of your UPS power conditions including the voltages, battery level, fault detected, and more.Emergency Power Off (EPO) TabInstantly shut off the UPS and prevent the UPS from supplying power in the event of an emergency.Mute Audible AlarmTemporarily mute the audible alarm from you UPS by pressing the ON button when audible alerts are ongoing. The mute setting is reset once the UPS returns to a normal state for the next time unusual activity is detected.Optional Accessories (Not Included)Network Management Card - For remote power monitoring. See model number #NMC for compatibility with this UPS series.Add-On External Battery Banks - Extend the battery runtime in the event of an extended power outage. See model # TAC-LV2KBB for compatibility with this UPS series. Maximum 3 x TAC-LV2BB may be used.Warranty (US & Canada)2-year equipment warranty, 2-year battery warranty, and 2-year connected equipment warranty with product registration. See Terms of Use and Warranty pages for additional information.WARNING:The batteries, battery posts, terminals, and related accessories can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. Wash hands after handling. For more information, go to www.p65warnings.ca.gov.
Maruson Technology 0U 15A Basic Power Distribution Unit, 12 Outlets, PDU-V1512, 858725000870Type: BasicInput/Output: 120V, single-phaseForm Factor: 0U, verticalInlet: 5-15POutlets: 12 x 5-15RFeatures: Overload protectionNetwork-grade buildThe Basic PDU is a network-grade device for distribution of unfiltered power from one power source to multiple devices such as computers, servers, and networking devices often installed in IT racks and data centers. Designed specifically for networking devices, this series was designed with metal housing for better heat distribution, durability, and resistance to corrosion.Typical Applications:IT racksData centersTelecommunicationsServer roomsNetwork wiring closetsSecurity systemsWorkspaceAudio & video racksSurveillance racksMain Features: (12) OutletsPower multiple devices at once from one power source.0U Vertical Rack InstallationSave rack space with 0U installation to mount outside of rack enclosures.Overload ProtectionProtect against an overcurrent, which can cause permanent damage to the PDU by exceeding the rated current of the PDU. If this occurs, turn off the PDU and remove devices causing the PDU rating to exceed. Then reset the circuit breaker.Network-Grade BuildHeavy-duty aluminum alloy casing distributes power evenly, good corrosion resistance, and heat dissipation.14AWG Power Cord and Strain RelieverHeavy-duty power cord and strain relief prevents stress and damage on the power cord to deliver power safely.Flexible Mountable DesignMount outside rack cabinets, under-counter, wall mount, or work bench.LED Status IndicatorLED will illuminate to indicate power is ON.Warranty (US & Canada)3-years with product registration. See the Warranty Policy and Terms and Conditions pages for additional information.WARNING:This product can exposure you to chemicals including lead or lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go www.p65warnings.ca.gov.
Maruson Technology 1U 15A Basic Power Distribution Unit, 10 Outlets, PDU-R1510, 858725000887Type: BasicInput/Output: 120V, single-phaseForm Factor: 1U, horizontalInlet: 5-15POutlets: 10 x 5-15RFeatures: Overload protectionNetwork-grade buildFits standard 19" rack cabinetsThe Basic PDU is a network-grade device for distribution of unfiltered power from one power source to multiple devices such as computers, servers, and networking devices often installed in IT racks and data centers. Designed specifically for networking devices, this series was designed with metal housing for better heat distribution, durability, and resistance to corrosion.Typical Applications:IT racksData centersTelecommunicationsServer roomsNetwork wiring closetsSecurity systemsWorkspaceAudio & video racksSurveillance racksMain Features: (10) OutletsPower multiple devices at once from one power source.19-inch Rack at 1U HeightFits standard rack cabinets with a low profile at only 1U.Overload ProtectionProtect against an overcurrent, which can cause permanent damage to the PDU by exceeding the rated current of the PDU. If this occurs, turn off the PDU and remove devices causing the PDU rating to exceed. Then reset the circuit breaker.Network-Grade BuildHeavy-duty aluminum alloy casing distributes power evenly, good corrosion resistance, and heat dissipation.14AWG Power Cord and Strain RelieverHeavy-duty power cord and strain relief prevents stress and damage on the power cord to deliver power safely.Flexible Mountable DesignMount outside rack cabinets, under-counter, wall mount, or work bench.LED Status IndicatorLED will illuminate to indicate power is ON.Warranty (US & Canada)3-years with product registration. See the Warranty Policy and Terms and Conditions pages for additional information.WARNING:This product can exposure you to chemicals including lead or lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go www.p65warnings.ca.gov.
Maruson Technology 1U 15A Surge-Protected Power Distribution Unit, 12 Outlets Plastic Housing, PDU-R1512PS, 851484006749Type: Surge-protectedInput/Output: 120V, single-phaseForm Factor: 1U, horizontalInlet: 5-15POutlets: 12 x 5-15RFeatures: Surge suppressionOverload protectionFits standard 19" rack cabinetsThe Surge-Protected PDU is a network-grade device expand the number of outlets from a single power source while protecting connected equipment from harmful transient surges and built-in circuit breaker protects the PDU from overload. The 1U height mounts horizontally in any standard 19" server rack.Typical Applications:IT racksData centersTelecommunicationsServer roomsNetwork wiring closetsSecurity systemsWorkspaceAudio & video racksSurveillance racksMain Features: (12) OutletsPower multiple devices at once from one power source.19-inch Rack at 1U HeightFits standard rack cabinets with a low profile at only 1U.Surge SuppressionProtects connected equipment from power surges.Overload ProtectionProtect against an overcurrent, which can cause permanent damage to the PDU by exceeding the rated current of the PDU. If this occurs, turn off the PDU and remove devices causing the PDU rating to exceed. Then reset the circuit breaker.Plastic HousingPlastic housing material instead of traditional metal housing in PDUs offers a lower cost solution that is lightweight and still able to power multiple devices from a single power source.14AWG Power Cord and Strain RelieverHeavy-duty power cord and strain relief prevents stress and damage on the power cord to deliver power safely.Flexible Mountable DesignMount outside rack cabinets, under-counter, wall mount, or work bench.LED Status IndicatorLED will illuminate to indicate power is ON.Warranty (US & Canada)3-years with product registration. See the Warranty Policy and Terms and Conditions pages for additional information.WARNING:This product can exposure you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go www.p65warnings.ca.gov.
Maruson Technology 800VA Line-Interactive Uninterruptible Power Supply Unit with AVR and Software, 6 Outlets, PRO-800LCD, 851484006466Capacity: 800VA / 450WTopology: Line-interactiveWave Form: Simulated sine waveOutlets: 6Features: AVR for battery-backed outletsSurge suppressionAuto restart while AC is recoveringOff-mode chargingPower management softwarePhone / fax / network combo portsThe PowerPro LCD UPS Series offers line-interactive topology along with automatic voltage regulation, transient surge suppression, and sufficient battery backup time for temporary power outages while protecting connected equipment against blackouts, brownouts, overvoltages, transient surges, spikes, and data line noise. In the event of a prolonged power outage, the internal battery provides temporary power so connected equipment can be properly shut down and in doing so, protects the equipment from hardware damage and data loss from the system crashes. Use the included software to connect the UPS to your computer for expanded control and monitoring. The compact tower form factor is perfect for desktops or floorspace without taking up too much room.Typical Applications:Entry-level computersWorkstationsGaming consolesHome networking devicesPoint-of-sale devicesSurveillance systemsSmart home devicesSecurity systemsVoIP / PBX systemsMain Features: (3) Battery-Backed Outlets with AVR Function and Surge ProtectionThese outlets keep critical electronics online during a temporary blackout, adjust minor voltage fluctuations, and offer protection from power surges and voltage spikes. If a blackout occurs or a power disruption beyond the tolerance range is detected, the UPS will switch over to battery power and supply these outlets with power. Connect mission-critical electronics to these outlets.(3) Surge-Protected OutletsConnect non-critical equipment to these outlets to protect the equipment from power surges and voltage spikes.Automatic Voltage Regulation (AVR)Automatically boosts or bucks minor voltage irregularities instead of switching to battery backup mode. By regulating the output voltage rather than using the battery, the UPS prolongs the lifespan of your battery and protects connected equipment against spikes, surges, brownouts, minor overvoltages and under voltages, and temporary blackouts.The more boosts and bucks there are, the wider the acceptable input voltage range is, which will decrease the need to switch to battery power, therefore prolonging the lifespan of your battery. This series offers two-step boost and one-step buck AVR functions.Overload ProtectionProtects the UPS from an overload. If the circuit breaker trips, unplug a few electronics before resetting the circuit breaker and turning your unit back on.Smart Battery ManagementMaximize battery performance and lifespan with an intelligent, multi-stage battery charging system to auto-sense the optimal battery charging performance based on battery levels.Power Management SoftwareMonitor and control the UPS from your computer with the included user-friendly software to automate computer shutdown, monitor battery levels, set UPS parameters, receive alerts of abnormalities, and more.Phone / Network / Fax Line Suppression (RJ-11/45 Ports)Protects telephone, network, or fax lines from line surges. Connect one line into the jack from the source and one line from the out jack to your phone, network, or fax line.Cold Start CapableTurn on the UPS even without utility power as long as there is sufficient battery power.Auto-Restart During AC RecoveryOnce power returns to normal and the battery levels are sufficient, the UPS will automatically restart.Off-Mode ChargingThe UPS continues charging the internal batteries when powered off as long as the unit is plugged into an AC mains wall socket.LCD ScreenSee real-time status information of your UPS power conditions including the voltages, battery level, fault detected, and more.Enable / Disable Audible AlarmEnable or disable the audible alert for your unit.To enable or disable the audible alarm, turn the LCD screen on first then press the button twice quickly. The UPS will beep once the alarm is enabled. The default setting for the audible alarm is enabled. If the alarm is disabled, no audible alert will be made when the UPS reaches a low battery state.Warranty (US & Canada)3-year equipment warranty, 2-year battery warranty, and 3-year connected equipment warranty with product registration.WARNING:This product can expose you to chemicals including bisphenol A (BPA) and styrene (ABS) which are known to the State of California to cause harm and cancer. The battery in this product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Maruson Technology 2000VA Online Rack Mount Uninterruptible Power Supply Unit, 8 Outlets, ULT-P2KRT, 851484006671Capacity: 2000VA / 1930WTopology: Online double-conversionWave Form: Sine waveOutlets: 8Features: 0.96 power factorZero transfer time from Line to BatteryAdjustable charging current up to 8AExpandable runtimeLoad segment control50/60Hz Frequency Converter ModeEmergency Power Off (EPO)ECO and Advanced ECO ModesThe UltimaPro RT series delivers reliable double-conversion online design with 0.96 power factor for energy efficiency to mission-critical loads. Zero transfer time and true sine wave offers an extraordinary battery backup system in rack mount form factor. With option to add-on external battery modules, this UPS battery runtime can be expanded as needed to meet your equipment needs with up to four add-on external battery banks.Typical Applications:Mid-size serversATMsLab equipmentNetworking devicesSurveillance systemsVoIP / PBX systemsSecurity systemsGaming computersSlot machinesMain Features: (8) Battery-Backed Outlets with Surge SuppressionThese outlets keep critical electronics online during a temporary blackout, adjust minor voltage fluctuations, and offer protection from power surges and voltage spikes. If a blackout occurs or a power disruption beyond the tolerance range is detected, the UPS will switch over to battery power and supply these outlets with power. Connect mission-critical electronics to these outlets.True Double-Conversion Online TopologyThe main supply is fed directly into the UPS and charges batteries within the UPS. The battery power is then converted back to the main power to feed the protected equipment. Due to these two conversions, this UPS type is often known as a Double-Conversion UPS.Zero Transfer TimeTrue online double-conversion topology for zero transfer time from Line Mode to Battery Mode in case of a power disturbance prevents malfunction of mission-critical equipment.Pure Sine Wave OutputBest waveform for sensitive electronics.Benefits include:Smoother waveformBest for sensitive equipmentHigher quality than a modified sine waveMaintains voltage at a safe levelMotors run at their intended speed and with less heatEquipment runs with less noiseIT equipment lasts longerLow harmonic distortionOverload ProtectionProtects the UPS from an overload. If the circuit breaker trips, unplug a few electronics before resetting the circuit breaker and turning your unit back on.0.96 Power FactorA high power factor rating offers efficient loading of the power supply. It maximizes energy efficiency to cut down on energy cost and energy loss by reducing the load on transformers and distribution equipment.Emergency Power Off (EPO) TabInstantly shut off the UPS and prevent the UPS from supplying power in the event of an emergency.Load Segment ControlControl grouped outlets allows better management of battery power by prioritizing mission-critical devices by manual or pre-setting. This allows mission-critical devices to have longer backup time than non-mission-critical devices.Expandable Battery RuntimeAdd up to 3 external battery banks to extend the battery runtime of your UPS.2A to 8A Adjustable Battery ChargerSelect between 2A to 8A battery charging current for faster battery recharge time depending on the number of external battery modules connected to the UPS. This is especially useful if located in an area with frequent power disturbances that would cause the UPS to run on Battery Mode frequently.Hot Swappable BatteriesReplace batteries without shutting off the UPS to avoid downtime.Power Management SoftwareMonitor and control the UPS from your computer with the included user-friendly software to automate computer shutdown, monitor battery levels, set UPS parameters, receive alerts of abnormalities, and more.50/60Hz Frequency Converter ModeSelect 50Hz or 60Hz output frequency best suited for connected equipment. It is especially helpful when used to help regulate the speed of motorized equipment to match the frequency.NOTE: If input frequency is 60Hz, setting the UPS output frequency to 50Hz will derate the UPS capacity by 40%.Rack / Tower ConvertibleInstall the UPS in vertically or horizontally.EMI / RFI FilterEMI / RFI filter suppresses electromagnetic noise and radio frequency interference transmitted from AC power.ECO and Advanced ECO ModesEfficiency Corrective Optimizer (ECO) improves energy consumption by changing how power flows through the UPS.ECO Mode: Improves energy efficiency of the UPS by setting the UPS to "standby." Input power will bypass voltage to output when the input voltage is within the acceptable range. Power factor correction and the inverter are still active in this mode.Advanced ECO Mode: Improves energy efficiency of the UPS by setting the UPS to "standby." Input power will bypass voltage to output when the input voltage is within the acceptable range. Power factor correction and the inverter are not active in this mode.Cold Start CapableTurn on the UPS even without utility power as long as there is sufficient battery power.Auto-Restart During AC RecoveryOnce power returns to normal and the battery levels are sufficient, the UPS will automatically restart.Off-Mode ChargingThe UPS continues charging the internal batteries when powered off as long as the unit is plugged into an AC mains wall socket.LCD ScreenSee real-time status information of your UPS power conditions including the voltages, battery level, fault detected, and more.Enable / Disable Audible AlarmEnable or disable the audible alert for your unit.To enable or disable the audible alarm, turn the LCD screen on first then press the button twice quickly. The UPS will beep once the alarm is enabled. The default setting for the audible alarm is enabled. If the alarm is disabled, no audible alert will be made when the UPS reaches a low battery state.Optional Accessories (Not Included)Network Management Card - For remote power monitoring. See model number #SNMP-2 for compatibility with this UPS series.Rail Kit - For installation to rack cabinets. See model # ULT-RMKIT123 for the compatible rail kit to this UPS.Add-On External Battery Banks - Extend the battery runtime in the event of an extended power outage. See model # ULT-P2KRTKBB for compatibility with this UPS.Warranty (US & Canada)2-year equipment warranty, 2-year battery warranty, and 2-year connected equipment warranty with product registration.WARNING:The batteries, battery posts, terminals, and related accessories can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. Wash hands after handling. For more information, go to www.p65warnings.ca.gov.
Maruson Technology 1U 15A Basic Power Distribution Unit, 8 Outlets, PDU-R1508, 858725000863Type: BasicInput/Output: 120V, single-phaseForm Factor: 1U, horizontalInlet: 5-15POutlets: 8 x 5-15RFeatures: Overload protectionNetwork-grade buildFits standard 19" rack cabinetsThe Basic PDU is a network-grade device for distribution of unfiltered power from one power source to multiple devices such as computers, servers, and networking devices often installed in IT racks and data centers. Designed specifically for networking devices, this series was designed with metal housing for better heat distribution, durability, and resistance to corrosion.Typical Applications:IT racksData centersTelecommunicationsServer roomsNetwork wiring closetsSecurity systemsWorkspaceAudio & video racksSurveillance racksMain Features: (8) OutletsPower multiple devices at once from one power source.19-inch Rack at 1U HeightFits standard rack cabinets with a low profile at only 1U.Overload ProtectionProtect against an overcurrent, which can cause permanent damage to the PDU by exceeding the rated current of the PDU. If this occurs, turn off the PDU and remove devices causing the PDU rating to exceed. Then reset the circuit breaker.Network-Grade BuildHeavy-duty aluminum alloy casing distributes power evenly, good corrosion resistance, and heat dissipation.14AWG Power Cord and Strain RelieverHeavy-duty power cord and strain relief prevents stress and damage on the power cord to deliver power safely.Flexible Mountable DesignMount outside rack cabinets, under-counter, wall mount, or work bench.LED Status IndicatorLED will illuminate to indicate power is ON.Warranty (US & Canada)3-years with product registration. See the Warranty Policy and Terms and Conditions pages for additional information.WARNING:This product can exposure you to chemicals including lead or lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go www.p65warnings.ca.gov.
Maruson Technology 825VA Standby Uninterruptible Power Supply Unit, 8 Outlets with Software, POP-825BS, 851484006442Capacity: 825VA / 450WTopology: StandbyWaveform: Simulated sine waveOutlets: 8Features: Microprocessor controlledSupports APFC equipmentAuto restart while AC is recoveringWall mountable & friendly battery swap designDC cold start functionPhone / fax / network combo portsThe Power Personal standby UPS provides cost-effective protection for electronic devices from brief blackouts, brownouts, and surges. In the event of an extended blackout, the battery-backed outlets give you some time to safely shut down your computer. The wall-mountable design provides flexible setup options to save desktop space.Typical Applications:LaptopsWorkstationsGaming consolesPersonal electronicsPoint-of-sale devicesSurveillance systemsHome networking devicesSmart home devicesPhone systemsMain Features: (4) Battery-Backed Outlets with Surge SuppressionThese outlets keep critical electronics online during a temporary blackout and protect connected equipment from power surges and voltage spikes.(4) Surge-Protected OutletsConnect non-critical equipment to these outlets to protect the equipment from power surges and voltage spikes.(2) Transformer-Spaced OutletsPlug your oversized plugs into these outlets.Microprocessor-Controlled OperationGuarantees high reliability of the UPS by having all functions of the unit controlled and monitored by a microprocessor.Cold Start CapableTurn on the UPS even without utility power as long as there is sufficient battery power.Auto-Restart During AC RecoveryOnce power returns to normal and the battery levels are sufficient, the UPS will automatically restart.Power Management SoftwareMonitor and control the UPS from your computer with the included user-friendly software to automate computer shutdown, monitor battery levels, set UPS parameters, receive alerts of abnormalities, and more.Phone / Network / Fax Line Suppression (RJ-11/45 Ports)Protects telephone, network, or fax lines from line surges. Connect one line into the jack from the source and one line from the out jack to your phone, network, or fax line.Mountable DesignTwo keyhole slots on the back of the UPS allow for mounting on a wall or desk to save desktop space.Off-Mode ChargingThe UPS continues charging the internal batteries when powered off as long as the unit is plugged into an AC mains wall socket.Enable / Disable Audible AlarmEnable or disable the audible alert for your unit.To enable or disable the audible alarm, turn the LCD screen on first then press the button twice quickly. The UPS will beep once the alarm is enabled. The default setting for the audible alarm is enabled. If the alarm is disabled, no audible alert will be made when the UPS reaches a low battery state.LED Status IndicatorsLEDs illuminate to indicate different UPS power conditions.Warranty (US & Canada)3-year equipment warranty, 2-year battery warranty, and 3-year connected equipment warranty with production registration.WARNING:This product can expose you to chemicals including bisphenol A (BPA) and styrene (ABS) which are known to the State of California to cause harm and cancer. The battery in this product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Maruson Technology 1500VA Sine Wave 2U Rack Mount Uninterruptible Power Supply Unit, 8 Outlets, NET-1500RM, 851484006114Capacity: 1500VA / 1350WTopology: Line-interactiveWave Form: Sine waveOutlets: 8Rack Height: 2UFeatures: True sine wave output0.9 output power factorAVR functionLoad segment control groupsSurge suppressionAuto restart while AC is recoveringRack/Tower convertibleExpandable runtime up to 4 external battery banksOptional network monitoring cardThe PowerNet RM is a line-interactive UPS with sine wave output, the ideal waveform for PCs, servers, and other sensitive electronics. It features dynamic AVR line conditioning to guard against surges/spikes and offers battery backup in the event of brownouts or blackouts. This UPS system is high-efficiency design to save on energy costs by reducing energy consumption and heat buildup. The rack/tower convertible form factor fits standard 19-inch rack cabinets or on its side as a tower setup.Typical Applications:Networking equipmentTelecom equipmentSlot machinesServersKiosksSurveillance systemsHigh-performance computersSecurity systemsVoIP / PBX systemsMain Features: (8) Battery-Backed Outlets with AVR Function and Surge ProtectionThese outlets keep critical electronics online during a temporary blackout, adjust minor voltage fluctuations, and offer protection from power surges and voltage spikes. If a blackout occurs or a power disruption beyond the tolerance range is detected, the UPS will switch over to battery power and supply these outlets with power.Pure Sine Wave OutputBest waveform for sensitive electronics.Benefits include:Smoother waveformBest for sensitive equipmentHigher quality than a modified sine waveMaintains voltage at a safe levelMotors run at their intended speed and with less heatEquipment runs with less noiseIT equipment lasts longerLow harmonic distortionAutomatic Voltage Regulation (AVR)Automatically boosts or bucks minor voltage irregularities instead of switching to battery backup mode. By regulating the output voltage rather than using the battery, the UPS prolongs the lifespan of your battery and protects connected equipment against spikes, surges, brownouts, minor overvoltages and under voltages, and temporary blackouts.The more boosts and bucks there are, the wider the acceptable input voltage range is, which will decrease the need to switch to battery power, therefore prolonging the lifespan of your battery.Emergency Power Off (EPO) TabInstantly shut off the UPS and prevent the UPS from supplying power in the event of an emergency.Overload ProtectionProtects the UPS from an overload. If the circuit breaker trips, unplug a few electronics before resetting the circuit breaker and turning your unit back on.Advanced Battery ManagementMaximize battery performance and lifespan with an intelligent, multi-stage battery charging system to auto-sense the optimal battery charging performance based on battery levels.Power Management SoftwareMonitor and control the UPS from your computer with the included user-friendly software to automate computer shutdown, monitor battery levels, set UPS parameters, receive alerts of abnormalities, and more.Cold Start CapableTurn on the UPS even without utility power as long as there is sufficient battery power.Auto-Restart During AC RecoveryOnce power returns to normal and the battery levels are sufficient, the UPS will automatically restart.Off-Mode ChargingThe UPS continues charging the internal batteries when powered off as long as the unit is plugged into an AC mains wall socket.LCD ScreenSee real-time status information of your UPS power conditions including the voltages, battery level, fault detected, and more.EMI / RFI FilterEMI / RFI filter suppresses electromagnetic noise and radio frequency interference transmitted from AC power.Phone / Network / Fax Line Suppression (RJ-11/45 Ports)Protects telephone, network, or fax lines from line surges. Connect one line into the jack from the source and one line from the out jack to your phone, network, or fax line.Disable Audible AlarmTo temporary disable the audible alarm, press the Mute button below the LCD screen for one second. The audible alarm will reset when a new event outside normal range of operations occurs.Optional Accessories (Not Included)Network Management Card - For remote power monitoring. See model number #NMC for compatibility with this UPS series.Rail Kit - For mounting in rack cabinet. See model number #NET-1522RMKIT for compatibility with this UPS series.External Battery Bank - To increase battery bank up time. Up to four external battery banks may be used with this model. See model number #NET-1500EBM for compatibility with this UPS model.Warranty (US & Canada)2-year equipment warranty, 2-year battery warranty, and 2-year connected equipment warranty with product registration.WARNING:The batteries, battery posts, terminals, and related accessories can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. Wash hands after handling. For more information, go to www.p65warnings.ca.gov.
Maruson Technology 0U 20A Basic Power Distribution Unit, 16 Outlets, PDU-V2016, 858725000979Type: BasicInput/Output: 120V, single-phaseForm Factor: 0U, verticalInlet: 5-20P, 20A T-blade plugOutlets: 16 (12 x 5-15R and 4 x 5-15/20R)Features: Overload protectionNetwork-grade buildThe Basic PDU is a network-grade device for distribution of unfiltered power from one power source to multiple devices such as computers, servers, and networking devices often installed in IT racks and data centers. Designed specifically for networking devices, this series was designed with metal housing for better heat distribution, durability, and resistance to corrosion.Typical Applications:IT racksData centersTelecommunicationsServer roomsNetwork wiring closetsSecurity systemsWorkspaceAudio & video racksSurveillance racksMain Features: (16) OutletsPower multiple devices at once from one power source.0U Vertical Rack InstallationSave rack space with 0U installation to mount outside of rack enclosures.Overload ProtectionProtect against an overcurrent, which can cause permanent damage to the PDU by exceeding the rated current of the PDU. If this occurs, turn off the PDU and remove devices causing the PDU rating to exceed. Then reset the circuit breaker.Network-Grade BuildHeavy-duty aluminum alloy casing distributes power evenly, good corrosion resistance, and heat dissipation.Heavy-Duty Power Cord and Strain RelieverHeavy-duty power cord and strain relief prevents stress and damage on the power cord to deliver power safely.Flexible Mountable DesignMount outside rack cabinets, under-counter, wall mount, or work bench.LED Status IndicatorLED will illuminate to indicate power is ON.Warranty (US & Canada)3-years with product registration. See the Warranty Policy and Terms and Conditions pages for additional information.WARNING:This product can exposure you to chemicals including lead or lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go www.p65warnings.ca.gov.
Maruson Technology Rail Kit for Maruson NET-1500RM and NET-2200RM, NET-1522RMKIT, 851484006152Compatibility: For PowerNet RM Series, 1500VA & 2000VA models UPS & external battery bank.Rail kit for PowerNet RM UPS & external battery bank. One set required per product to be mounted. Durable metal brackets.Note:This kit is only compatible with the PowerNet RM Series UPS and external battery banks. It is not compatible with other series.