Buy PCE Instruments Particle Counter Measurable particle sizes 0.3/0.5/1.0/2.5/5.0 and 10 µm PCE-MPC 25 cheaply

Preview: PCE Instruments Particle Counter, Measurable particle sizes 0.3/0.5/1.0/2.5/5.0 and 10 µm, PCE-MPC 25

PCE Instruments Particle Counter, Measurable particle sizes 0.3/0.5/1.0/2.5/5.0 and 10 µm, PCE-MPC 25

Manufacturer:	PCE Instruments
Supplier number:	PCE-MPC 25
UPC:	4250348730282

Other items from PCE Instruments

Technical specs:

Mass concentration
Measurable particle sizes PM2.5 / PM10
Measuring range PM 2.5
0 ... 1000 µg/m³
Resolution 1 µm

Accuracy PM 2.5
0 ... 100 µg/m³: ±10 µg/m³
101 ... 1000 µg/m³: ±10% of Mw.

Particle counter
Measurable particle sizes 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Resolution 1 µm
Accuracy reference measurement
Number of maximum particles 2.000.000 particles/L

Temperature
Measuring range -10 ... 60 °C, 14 ... 140 °F
Resolution 0.01 °C, °F
Accuracy ±2 °C, ±3.6 °F

Humidity (r. h.)
Measuring range 0 ... 100 %
Resolution 0.01 %
Accuracy ±3

Further specifications
Response time 1 second
Warm-up time 10 seconds
Mounting connection 1/4" Tripod connection
Dimension suction
Outside: Ø13 mm
Inside: Ø7 mm
Height: 35 mm

Display 3.2" LC color display

Power supply (power supply unit)
Primary: 100 ... 240 V AC, 50 / 60 Hz, 0.3 A
Secondary: 5 V DC, 2 A

Power supply (rechargeable battery) 3.7 V, 8.14 Wh, 18650
Battery life approx. 9 hours

Automatic power off
off
15, 30, 45 minutes
1, 2, 4, 8 hours

Data memory
Flash memory for approx. 12 measuring runs
One measuring run contains 999 measuring points

Storage interval
10, 30 seconds
1, 5, 10, 30, 60 minutes

Dimensions 222 x 80 x 46 mm
Weight 320 g

PCE Instruments Particle Counter, Measurable particle sizes 0.3/0.5/1.0/2.5/5.0 and 10 µm,...more

Close menu

PCE Instruments Particle Counter, Measurable particle sizes 0.3/0.5/1.0/2.5/5.0 and 10 µm, PCE-MPC 25, 4250348730282

The particle counter is used in offices, workshops or also in laboratories to carry out orienting measurements of the ambient conditions. In addition to the number of particles, the particle counter determines the mass concentration PM2.5 and PM10 in the measuring range 0 ... 1000 µg/m³. In addition, the temperature and ambient humidity are measured. With the alarm limit function, limit values for PM2.5 can be set for the particle counter.

During a measurement it is possible to record the measured values with the particle counter. For this purpose, a memory with a storage capacity of approx. 12 measurement runs with 999 measurement points each is available for the particle counter. The interval of the particle counter can be set in different times.

The 8 Wh battery can be charged via the Micro USB interface. The battery used for the particle counter allows an operating time of approx. 9 hours. Thus, the particle counter can perform measurements over an entire working day before it must be recharged. Since the battery is not permanently installed in the particle counter, it can be easily replaced.

If you have further questions about the particle counter PCE-MPC 15 / PCE-MPC 25, please have a look at the following technical data or use our contact form. Our technicians and engineers will be very happy to advise you regarding particle counters or any other products in the field of control technology, laboratory technology, measuring instruments or scales of PCE Deutschland GmbH.

Data memory for data logging
Adjustable alarm in case of exceeded limit value
Transport case for safe transport
Suitable for orientation measurement
Measuring range 0 - 1000 µm/m³
Micro USB interface

Delivery Scope

1 x Particle counter PCE-MPC 25
1 x carrying case
1 x 18650 battery
1 x Mini Tripod
1 x Micro USB cable
1 x USB power supply
1 x Instruction manual