PCE Instruments EVSE Adapter, PCE-EVSE 300

PCE Instruments EVSE Adapter, PCE-EVSE 300, 4250348727541

Electromobility is playing an increasingly important role. An important point here are the charging stations of electric vehicles. Special measuring devices are needed to check the function, protective devices and insulation of permanently installed charging stations, also known as wallboxes. Often there are already measuring devices to perform the required measurements. Therefore, an adapter is needed so that the measuring device can be connected to the charging station.

The EVSE adapter / test adapter for charging stations is specially designed for this application and already brings a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EVSE adapter. This allows the charging station to be checked for insulation with the help of the EVSE adapter. The EVSE adapter has an earthed plug connection. The RCD tester can thus be used to check the residual current device A charging cable not only contains the supply lines for charging an electric vehicle, but also two interfaces.

Via the CP line (Control Pilot), the electric vehicle communicates with the charging station and communicates the current status of the electric vehicle. The PP line (Proximity Plug) is used for communication between the connected charging cable and the charging station / charging pole. The charging cable can thus tell the charging station how many amps it may be loaded with. To test both functions, the EVSE adapter is equipped with appropriate simulators.

• EVSE Adapter for charging plug type 1 and 2
• PP and CP Simulation
• Schuko socket connection
• Direct acceptance of all connections via laboratory plug

Delivery Scope

• 1 x PCE-EVSE 300 EVSE adapter for charging columns
• 1 x charging cable plug type 1
• 1 x charging cable plug type 2
• 1 x transport bag
• 1 x instruction manual