Manufacturer: |
PCE Instruments
|
Supplier number: | PCE-EMF 40 |
UPC: | 4250348722294 |
Technical specs:
- Low frequency magnetic field
- Unit µT
- Measuring range 20,00 ... 200.0 µT
- Resolution 0.01 µT, 0.1 µT
- Accuracy ±12 % + 5 digits at 50 / 60 Hz
- Unit mG
- Measuring range 200,0 ... 2000 mG
- Resolution 0.1 mG, 1 mG
- Accuracy ±12 % + 5 digits at 50 / 60 Hz
- Low frequency electromagnetic field
- Unit V/m
- Measuring range 50 V/m ... 2000 V/m
- Resolution 1 V/m ±7 %
- Accuracy + 20 digits at 50 / 60 Hz
- High frequency electromagnetic field
- Unit mV/m, V/m
- Measuring range 30.0 mV/m ... 11.00 V/m
- Resolution 0.01, 0.1 mV/m, 0.01 V/m
- Accuracy 1.0 dB at 1 V/m and 900 MHz, >1 V/m are for reference only
- Unit µW/cm²
- Measuring range 0,02 ... 32.0 µW/cm²
- Resolution 0,01, 0,1 µW/cm²
Unit µW/m², mW/m² - Measuring range 2.3 µW/m² ... 320.9 µW/m²
- Resolution 0.1, 1 µW/m², 0.1 mW/m²
Unit mA/m - Measuring range 0,07 ... 29.1 mA/m
- Resolution 0,01, 0.1 mA/m
- High frequency bandwidth: 50 MHz ... 3.5 GHz
- Low frequency: 50 / 60 Hz
- Number of sensor
- Magnetic field: 3
- Electromagnetic field: 1
- Measuring rate 1 Hz
- Display when measured value is exceeded"- - -"
- memory MIN / MAX memory
- Display 2.4" TFT
- Power supply 3 x 1.5 V AAA batteries
- Current consumption approx. 24 ... 38 mA
- Automatic switch-off after 10 minutes Function can be switched off
- Operating conditions 0 ... 50 °C,< 80% RH
- Dimensions 107 x 60 x 25 mm
- Weight approx 106 g (without batteries)
All specifications are based on an ambient temperature of 23 ±5 °C, an ambient humidity of 25 ... 75 % r.h. and an RF field strength of less than 3 V/m and 30 MHz.
PCE Instruments Magnetic Field Tester Up to 2000 V/M, PCE-EMF 40, 4250348722294 With this...more
PCE Instruments Magnetic Field Tester Up to 2000 V/M, PCE-EMF 40, 4250348722294
With this industrial safety measuring device it is possible to directly measure magnetic fields up to 2000 mG. At the same time, the safety meter displays the strength of the magnetic field numerically using an X, Y and Z axis. Another measuring function of the industrial safety meter is the electromagnetic field strength measurement.
With this measuring function of the industrial safety measuring device, the electromagnetic field strength at supply lines can be determined at a frequency of 50 / 60 Hz. It is also possible to perform measurements in the high frequency range with the industrial safety measuring device. This means that measurements can be carried out on a WLAN router or a cell phone, for example. Due to its many measuring functions, the industrial safety measuring device is thus a compact and multifunctional measuring device. In addition to the numerical display of the industrial safety measuring device, a graphical history of the last 20 measured values is displayed at the same time. The measured value is also displayed as a bar chart by the industrial safety measuring device. This bar chart is divided into three traffic light colors. As soon as the measured value exceeds a fixed measured value, so that the bar chart of the industrial safety measuring device has reached the red area, an acoustic alarm is activated. This alarm in the occupational safety measuring device switches off automatically as soon as the measured value is below the fixed threshold. All three measuring modes can be read simultaneously on the 2.4'' TFT display of the industrial safety measuring device. It is therefore not necessary to switch between the individual measuring modes on the industrial safety measuring device. The background illumination of the industrial safety measuring device can be adjusted in 4 steps. Thus, the display of the industrial safety measuring device can be adapted to various environmental conditions at the touch of a button.
With this industrial safety measuring device it is possible to directly measure magnetic fields up to 2000 mG. At the same time, the safety meter displays the strength of the magnetic field numerically using an X, Y and Z axis. Another measuring function of the industrial safety meter is the electromagnetic field strength measurement.
With this measuring function of the industrial safety measuring device, the electromagnetic field strength at supply lines can be determined at a frequency of 50 / 60 Hz. It is also possible to perform measurements in the high frequency range with the industrial safety measuring device. This means that measurements can be carried out on a WLAN router or a cell phone, for example. Due to its many measuring functions, the industrial safety measuring device is thus a compact and multifunctional measuring device. In addition to the numerical display of the industrial safety measuring device, a graphical history of the last 20 measured values is displayed at the same time. The measured value is also displayed as a bar chart by the industrial safety measuring device. This bar chart is divided into three traffic light colors. As soon as the measured value exceeds a fixed measured value, so that the bar chart of the industrial safety measuring device has reached the red area, an acoustic alarm is activated. This alarm in the occupational safety measuring device switches off automatically as soon as the measured value is below the fixed threshold. All three measuring modes can be read simultaneously on the 2.4'' TFT display of the industrial safety measuring device. It is therefore not necessary to switch between the individual measuring modes on the industrial safety measuring device. The background illumination of the industrial safety measuring device can be adjusted in 4 steps. Thus, the display of the industrial safety measuring device can be adapted to various environmental conditions at the touch of a button.
- Industrial safety measuring device with 2.4'' display
- Backlight adjustable in four steps
- Measuring range up to 2000 V/m
- 3-axis measurement
- For mobile and fast use
- 1 x PCE-EMF 40 industrial safety measuring device
- 3 x 1.5 V AAA batteries
- 1 x instruction manual
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
PC-709
You will receive your personal $15 voucher with your order confirmation
Spend over $200 and get a $15 voucher for your next order
$15
$593.10 *
$830.34 *
(28.57% Saved)
Free shipping!
Delivery time 3-5 business days
Secure payment
PCE Instruments Magnetic Field Tester Up to 2000 V/M, PCE-EMF 40
Add this item and enjoy fast shipping
Popular product! About people already have it in their shopping cart
Free SHIPPING - Directly from the manufacturer!
Top seller in the store!
Proven product
Top international brands already trust us!
Secure shopping
- Free shipping from $50
- Fast delivery
- Your personal buyer protection
Manufacturer: |
PCE Instruments
|
Supplier number: | PCE-EMF 40 |
UPC: | 4250348722294 |
Technical specs:
- Low frequency magnetic field
- Unit µT
- Measuring range 20,00 ... 200.0 µT
- Resolution 0.01 µT, 0.1 µT
- Accuracy ±12 % + 5 digits at 50 / 60 Hz
- Unit mG
- Measuring range 200,0 ... 2000 mG
- Resolution 0.1 mG, 1 mG
- Accuracy ±12 % + 5 digits at 50 / 60 Hz
- Low frequency electromagnetic field
- Unit V/m
- Measuring range 50 V/m ... 2000 V/m
- Resolution 1 V/m ±7 %
- Accuracy + 20 digits at 50 / 60 Hz
- High frequency electromagnetic field
- Unit mV/m, V/m
- Measuring range 30.0 mV/m ... 11.00 V/m
- Resolution 0.01, 0.1 mV/m, 0.01 V/m
- Accuracy 1.0 dB at 1 V/m and 900 MHz, >1 V/m are for reference only
- Unit µW/cm²
- Measuring range 0,02 ... 32.0 µW/cm²
- Resolution 0,01, 0,1 µW/cm²
Unit µW/m², mW/m² - Measuring range 2.3 µW/m² ... 320.9 µW/m²
- Resolution 0.1, 1 µW/m², 0.1 mW/m²
Unit mA/m - Measuring range 0,07 ... 29.1 mA/m
- Resolution 0,01, 0.1 mA/m
- High frequency bandwidth: 50 MHz ... 3.5 GHz
- Low frequency: 50 / 60 Hz
- Number of sensor
- Magnetic field: 3
- Electromagnetic field: 1
- Measuring rate 1 Hz
- Display when measured value is exceeded"- - -"
- memory MIN / MAX memory
- Display 2.4" TFT
- Power supply 3 x 1.5 V AAA batteries
- Current consumption approx. 24 ... 38 mA
- Automatic switch-off after 10 minutes Function can be switched off
- Operating conditions 0 ... 50 °C,< 80% RH
- Dimensions 107 x 60 x 25 mm
- Weight approx 106 g (without batteries)
All specifications are based on an ambient temperature of 23 ±5 °C, an ambient humidity of 25 ... 75 % r.h. and an RF field strength of less than 3 V/m and 30 MHz.
PCE Instruments Magnetic Field Tester Up to 2000 V/M, PCE-EMF 40, 4250348722294 With this...more
PCE Instruments Magnetic Field Tester Up to 2000 V/M, PCE-EMF 40, 4250348722294
With this industrial safety measuring device it is possible to directly measure magnetic fields up to 2000 mG. At the same time, the safety meter displays the strength of the magnetic field numerically using an X, Y and Z axis. Another measuring function of the industrial safety meter is the electromagnetic field strength measurement.
With this measuring function of the industrial safety measuring device, the electromagnetic field strength at supply lines can be determined at a frequency of 50 / 60 Hz. It is also possible to perform measurements in the high frequency range with the industrial safety measuring device. This means that measurements can be carried out on a WLAN router or a cell phone, for example. Due to its many measuring functions, the industrial safety measuring device is thus a compact and multifunctional measuring device. In addition to the numerical display of the industrial safety measuring device, a graphical history of the last 20 measured values is displayed at the same time. The measured value is also displayed as a bar chart by the industrial safety measuring device. This bar chart is divided into three traffic light colors. As soon as the measured value exceeds a fixed measured value, so that the bar chart of the industrial safety measuring device has reached the red area, an acoustic alarm is activated. This alarm in the occupational safety measuring device switches off automatically as soon as the measured value is below the fixed threshold. All three measuring modes can be read simultaneously on the 2.4'' TFT display of the industrial safety measuring device. It is therefore not necessary to switch between the individual measuring modes on the industrial safety measuring device. The background illumination of the industrial safety measuring device can be adjusted in 4 steps. Thus, the display of the industrial safety measuring device can be adapted to various environmental conditions at the touch of a button.
With this industrial safety measuring device it is possible to directly measure magnetic fields up to 2000 mG. At the same time, the safety meter displays the strength of the magnetic field numerically using an X, Y and Z axis. Another measuring function of the industrial safety meter is the electromagnetic field strength measurement.
With this measuring function of the industrial safety measuring device, the electromagnetic field strength at supply lines can be determined at a frequency of 50 / 60 Hz. It is also possible to perform measurements in the high frequency range with the industrial safety measuring device. This means that measurements can be carried out on a WLAN router or a cell phone, for example. Due to its many measuring functions, the industrial safety measuring device is thus a compact and multifunctional measuring device. In addition to the numerical display of the industrial safety measuring device, a graphical history of the last 20 measured values is displayed at the same time. The measured value is also displayed as a bar chart by the industrial safety measuring device. This bar chart is divided into three traffic light colors. As soon as the measured value exceeds a fixed measured value, so that the bar chart of the industrial safety measuring device has reached the red area, an acoustic alarm is activated. This alarm in the occupational safety measuring device switches off automatically as soon as the measured value is below the fixed threshold. All three measuring modes can be read simultaneously on the 2.4'' TFT display of the industrial safety measuring device. It is therefore not necessary to switch between the individual measuring modes on the industrial safety measuring device. The background illumination of the industrial safety measuring device can be adjusted in 4 steps. Thus, the display of the industrial safety measuring device can be adapted to various environmental conditions at the touch of a button.
- Industrial safety measuring device with 2.4'' display
- Backlight adjustable in four steps
- Measuring range up to 2000 V/m
- 3-axis measurement
- For mobile and fast use
- 1 x PCE-EMF 40 industrial safety measuring device
- 3 x 1.5 V AAA batteries
- 1 x instruction manual
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
Questions about the article
Your question:
Personal data:
Continue shopping
PCE-EMF 40