Manufacturer: |
PCE Instruments
|
Supplier number: | PCE-127/4 |
UPC: | 4250348728425 |
Technical specs:
- Capacity 100 ml
- Diameter nozzle 4 mm ( ± 0,02 mm)
- Standard DIN 53211
- Flow time 25 ... 150
- Dynamic viscosity (mPA * s) 96.2 ... 680
- Material cup: anodized aluminum
- Nozzle: stainless steel
- Dimension 127/4 Ø inside 50 mm Ø outside 85 mm Height 70 mm
- Weight approx. 200 g
- Dimension 127/4P (immersion cup) Ø inside 50 mm Ø outside 65 mm Height 78 mm
- Handle height 170 mm
- Weight approx. 215 g
PCE Instruments DIN Flow Cup, PCE-127/4, 4250348728425 DIN outlet cups are viscosity meters for...more
PCE Instruments DIN Flow Cup, PCE-127/4, 4250348728425
DIN outlet cups are viscosity meters for determining the viscosity of liquids. They are often used in industry and research laboratories. Due to the form of the measuring method, however, the determination is only carried out on low-viscosity liquids, since the liquid cannot flow through the nozzles if the viscosity is too high. Liquids with Newtonian behavior therefore give the most accurate results in the outlet cup. Based on the flow volume and the measured time it takes for the liquid to pass through the nozzle from the outlet cup, the viscosity can be determined. The start time begins when the liquid exits at the bottom of the nozzle. It is stopped as soon as the liquid no longer flows evenly or a break in the liquid occurs.
In addition, there are immersion cups that are suitable for quick measurement on site, these are only immersed in the material to be measured. As soon as you lift out the cup and the liquid comes out of the nozzle, you can start with the time measurement.
After completion of the measurement, it is imperative that the outlet cup is cleaned, as dried-on residues can falsify the next measurement result. It should also be ensured that no pointed or sharp tools are used for cleaning. Scratches and scuffs in the outlet cup also affect the result.
DIN outlet cups are viscosity meters for determining the viscosity of liquids. They are often used in industry and research laboratories. Due to the form of the measuring method, however, the determination is only carried out on low-viscosity liquids, since the liquid cannot flow through the nozzles if the viscosity is too high. Liquids with Newtonian behavior therefore give the most accurate results in the outlet cup. Based on the flow volume and the measured time it takes for the liquid to pass through the nozzle from the outlet cup, the viscosity can be determined. The start time begins when the liquid exits at the bottom of the nozzle. It is stopped as soon as the liquid no longer flows evenly or a break in the liquid occurs.
In addition, there are immersion cups that are suitable for quick measurement on site, these are only immersed in the material to be measured. As soon as you lift out the cup and the liquid comes out of the nozzle, you can start with the time measurement.
After completion of the measurement, it is imperative that the outlet cup is cleaned, as dried-on residues can falsify the next measurement result. It should also be ensured that no pointed or sharp tools are used for cleaning. Scratches and scuffs in the outlet cup also affect the result.
- DIN outlet cup for viscosity measurement
- German standard DIN 53211
- Cup made of anodized aluminum / also as immersion cup
- 1 x PCE-127/4 DIN spout cup
- 1 x glass plate
- 1 x factory certificate
- 1 x instruction manual
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
PC-574
You will receive your personal $15 voucher with your order confirmation
Spend over $200 and get a $15 voucher for your next order
$15
$249.30 *
$361.49 *
(31.04% Saved)
Free shipping!
Delivery time 3-5 business days
Secure payment
PCE Instruments DIN Flow Cup, PCE-127/4
Add this item and enjoy fast shipping
Popular product! About people already have it in their shopping cart
Free SHIPPING - Directly from the manufacturer!
Top seller in the store!
Proven product
Top international brands already trust us!
Secure shopping
- Free shipping from $50
- Fast delivery
- Your personal buyer protection
Manufacturer: |
PCE Instruments
|
Supplier number: | PCE-127/4 |
UPC: | 4250348728425 |
Technical specs:
- Capacity 100 ml
- Diameter nozzle 4 mm ( ± 0,02 mm)
- Standard DIN 53211
- Flow time 25 ... 150
- Dynamic viscosity (mPA * s) 96.2 ... 680
- Material cup: anodized aluminum
- Nozzle: stainless steel
- Dimension 127/4 Ø inside 50 mm Ø outside 85 mm Height 70 mm
- Weight approx. 200 g
- Dimension 127/4P (immersion cup) Ø inside 50 mm Ø outside 65 mm Height 78 mm
- Handle height 170 mm
- Weight approx. 215 g
PCE Instruments DIN Flow Cup, PCE-127/4, 4250348728425 DIN outlet cups are viscosity meters for...more
PCE Instruments DIN Flow Cup, PCE-127/4, 4250348728425
DIN outlet cups are viscosity meters for determining the viscosity of liquids. They are often used in industry and research laboratories. Due to the form of the measuring method, however, the determination is only carried out on low-viscosity liquids, since the liquid cannot flow through the nozzles if the viscosity is too high. Liquids with Newtonian behavior therefore give the most accurate results in the outlet cup. Based on the flow volume and the measured time it takes for the liquid to pass through the nozzle from the outlet cup, the viscosity can be determined. The start time begins when the liquid exits at the bottom of the nozzle. It is stopped as soon as the liquid no longer flows evenly or a break in the liquid occurs.
In addition, there are immersion cups that are suitable for quick measurement on site, these are only immersed in the material to be measured. As soon as you lift out the cup and the liquid comes out of the nozzle, you can start with the time measurement.
After completion of the measurement, it is imperative that the outlet cup is cleaned, as dried-on residues can falsify the next measurement result. It should also be ensured that no pointed or sharp tools are used for cleaning. Scratches and scuffs in the outlet cup also affect the result.
DIN outlet cups are viscosity meters for determining the viscosity of liquids. They are often used in industry and research laboratories. Due to the form of the measuring method, however, the determination is only carried out on low-viscosity liquids, since the liquid cannot flow through the nozzles if the viscosity is too high. Liquids with Newtonian behavior therefore give the most accurate results in the outlet cup. Based on the flow volume and the measured time it takes for the liquid to pass through the nozzle from the outlet cup, the viscosity can be determined. The start time begins when the liquid exits at the bottom of the nozzle. It is stopped as soon as the liquid no longer flows evenly or a break in the liquid occurs.
In addition, there are immersion cups that are suitable for quick measurement on site, these are only immersed in the material to be measured. As soon as you lift out the cup and the liquid comes out of the nozzle, you can start with the time measurement.
After completion of the measurement, it is imperative that the outlet cup is cleaned, as dried-on residues can falsify the next measurement result. It should also be ensured that no pointed or sharp tools are used for cleaning. Scratches and scuffs in the outlet cup also affect the result.
- DIN outlet cup for viscosity measurement
- German standard DIN 53211
- Cup made of anodized aluminum / also as immersion cup
- 1 x PCE-127/4 DIN spout cup
- 1 x glass plate
- 1 x factory certificate
- 1 x instruction manual
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
Questions about the article
Your question:
Personal data:
Continue shopping
PCE-127/4