PCE Instruments Anemometer with Volume Flow Hood, PCE-VA 20-SET

PCE Instruments Anemometer with Volume Flow Hood, PCE-VA 20-SET, 4250348714664

The anemometer PCE-VA 20 in set with volume flow hood is used to measure the flow velocity and volume flow in the field of maintenance of ventilation and air conditioning systems. In addition, the anemometer with volume flow hood can measure climate parameters such as temperature and humidity. From these, the meter calculates the dew point (DP) and wet bulb temperature (WBT). All measured and calculated parameters are shown on the two-line LC display of the anemometer with volume flow hood. The upper part of the display shows the flow velocity, humidity and in the average mode the average value. The lower display shows temperature, volume flow, wet bulb temperature and the dew point depending on the measuring mode.

For a better and faster evaluation of the measured values, the anemometer with volume flow hood provides the user with a max, min and average measurement. The anemometer is operated with four 1.5 V AAA batteries. Thus the anemometer with volume flow hood is mobile applicable. In addition to the anemometer, the scope of delivery of this measuring set also includes 2 volume flow hoods, which can be plugged directly onto the display unit. The volume flow hoods are suitable for measurements of the air mass at round and angular duct outlets or inlets.

• Anemometer with volume flow hood PCE-VA 20-SET Measurement of wind speed, volume flow, temperature, humidity dew point and wet bulb temperature
• Backlight
• 10 cm impeller diameter
• Extreme value measurement
• HOLD function
• Automatic switch-off

Delivery Scope

• 1 x anemometer PCE-VA 20
• 1 x volume flow hood round Ø 210 mm
• 1 x volume flow hood square 346 x 346 mm
• 4 x 1.5 V AAA batteries
• 1 x carrying case
• 1 x instruction manual