Cuttermasters DAREx M3 or M5 Replacement Wheel, Diamond for Carbide, grit: 180, CM-M5D180

Cuttermasters DAREx M3 or M5 Replacement Wheel, Diamond for Carbide, grit: 180, CM-M5D180

DAREx M3 OR M5 REPLACEMENT WHEELS.

• Choose CBN for cobalt and High Speed Steel tools and choose Diamond for Carbide tools
• Choose 100 or 180 grit. Generally 100 grit is better for the deeper split point cut and the 180 provides a better finish for a sharp cutting lip.
• These are very accurate wheels with more grit and better shape than the stock DAREx wheels
• Cuttermaster CBN and Diamond Wheels last 2 to 3 times longer than the Darex plated wheels
• There is virtually no dust and the wheel maintains a sharp corner producing accurate Tip Geometry and a good center when point splitting
• 6″ Diameter X 3/4″ Width X 1-1/4″ Arbor

Do you need a 6" wheel guard? These wheels have 1.25" arbor. Do you need a bushing?

• Cuttermasters DAREx CBN and Diamond Replacement Grinding Wheels
• 6" x 3/4" x 1-1/4" arbor (5/8" bushing available)
• CBN and Diamond
• 100 and 180 grit
• For DAREx M3 or M5
• Bushings for 5/8" arbor available