Manufacturer: |
BendPak
|
Supplier number: | 5175120 |
UPC: | 849672001041 |
Technical specs:
- 7,000-lb. lifting capacity
- High lift with short runways
- Electric-hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
- High-speed lifting
- Features heavy-duty 3/8" aircraft cable
- Rugged 1.25" roller axles
- Multi-position safety locks in each column
- Adjustable lock ladders
- Ramps feature non-skid surface
- Push-button pneumatic safety release
- Optional 4,500-lb. capacity rolling jack available (Model RBJ4500)
- Style
- Style: Four-Post Parking Lift
- Capacity
- Lifting Capacity: 7,000
- A - Min. Runway Height: 4.5" (114 mm)
- B - Max. Rise: 82" (2,083 mm)
- C - Max. Lifting Height: 86.5" (2,197 mm)
- D - Overall Width: 99.75" (2,534 mm)
- E - Outside Length: 174" (4,420 mm)
- F - Overall Length: 200" (5,080 mm)
- G - Height of Columns: 100" (2,540 mm)
- H - Width Between Columns: 89.75" (2,280 mm)
- I - Drive-Thru Clearance: 76.5" (1,943 mm)
- J - Runway Width: 19" (483 mm)
- K - Length of Runways: 164" (4,166 mm)
- L - Width Between Runways: 37.5" (952 mm)
- M - Runway Centerline: 56.5" (1,435 mm)
- N - Outside Edge of Runways: 75.5" (1,918 mm)
- Time to Full Rise: 35 seconds
- Locking Positions: 15
- Lock Spacing: Every 4" (102 mm)
- Motor: 220 VAC / 60 Hz / 1 Ph
- Note: An air supply (minimum: 30 psi / 3 CFM) is may be required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
- Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
- WARNING: California Prop 65
BendPak Wide Car Lift HD-7W, 7,000-lb. Capacity, 5175120, 849672001041 Important: The vehicles...more
BendPak Wide Car Lift HD-7W, 7,000-lb. Capacity, 5175120, 849672001041
Important: The vehicles shown in the images are for illustration purposes only. The images may not be an exact representation of the product.
BendPak's HD-7W is the standard-width car lift model in the HD-7 series. With a 110.25" overall width and a spacious 100.25" spread between the columns, there’s plenty of room to park most cars and trucks in the lower position.
Dependable, Light-Duty 7,000-lb. Capacity Four-Post Lift
The 7,000-lb. capacity HD-7W is ideal for shops that want the versatility to park sports cars, sedans, light-duty trucks and SUVs in the same structure. There's even enough side clearance to accommodate larger truck mirrors. Even so, this lift is only slightly larger than a typical parking space. Due to its reduced footprint, as well as its ability to house a variety of vehicle types in a low-ceiling garage, the HD-7W is an extremely attractive parking and maintenance solution for both homeowners and professional technicians.
Watch review from Woman.Driven on the HD-7 four-post lift!
Dependable design
The HD-7W features four stainless steel wire ropes, as well as a lone hydraulic cylinder that remains tucked underneath the runway. This powerful cylinder ensures you get a super-durable design that requires minimal maintenance over time.
Dual-hub wire rope sheaves
Larger wire rope sheaves prevent undue wear-and-tear on the four-post lift's axles, wire rope and even the sheaves themselves. Dual-hub and oversized sheaves provide a safer product that lasts longer and costs less to maintain. The larger the sheave, the less friction against the components, so we make every single sheave larger than necessary. Typically speaking, the bigger the lift, the bigger the sheave!
Multi-level locking positions
Parking and service height is totally up to you. Every few inches, the columns will automatically lock into place; simply lower the runways onto the lock as they move over it. Push-button controls will release all four locks together.
Secondary safety locks
A secondary lock system acts as a slack-cable device that catches the runways and keeps your vehicle level in case any dangerous cable slack develops. The lift will not be operational until you have a chance to resolve the issue.
Heavy-duty aircraft wire rope
Extremely powerful stainless steel wire ropes are rated at 14,400 lbs. each. They're called "aircraft quality" for a reason! The combined rating of these cables is more than 822% of the entire lift’s maximum lifting capacity, and all wire rope is fully enclosed within the lift structure.
Electric-hydraulic power system
A zero-service power unit is incorporated into the four-post lift structure. Dependable, long-lasting and extremely safe, it's always close at hand for your convenience.
Large base plates
10" x 12" base plates provide a stable yet minimal footprint for the HD-7W. Your four-post lift is as structurally sound as any car lift ever made.
Caster kit
A rugged, 4-piece caster kit makes your lift mobile, so you can get it out of the way for other service jobs or to simply park your vehicles in a different park of the garage. Foot-lock casters work with or without a vehicle raised on the runways.
Integrated design
For your safety and convenience, and to improve the aesthetics of your BendPak lift, the critical lifting components (e.g., airlines, safety latches and wire rope sheaves) are all fully enclosed within the columns of the lift.
Low-deck runways
Low-profile, 4.5" high runways make it easy to load vehicles onto the lift. Lower runways mean less time driving up the approach ramps; the result is a safer, easier approach.
Longer approach ramps
The effectiveness of the lowered runways is bolstered by gentle approach ramps that won't damage low-riding vehicles. Extended-length approach ramps permit drivers of all experience levels to load vehicles onto the runways without scratching the front ends of low-riding cars.
Important: The vehicles shown in the images are for illustration purposes only. The images may not be an exact representation of the product.
BendPak's HD-7W is the standard-width car lift model in the HD-7 series. With a 110.25" overall width and a spacious 100.25" spread between the columns, there’s plenty of room to park most cars and trucks in the lower position.
Dependable, Light-Duty 7,000-lb. Capacity Four-Post Lift
The 7,000-lb. capacity HD-7W is ideal for shops that want the versatility to park sports cars, sedans, light-duty trucks and SUVs in the same structure. There's even enough side clearance to accommodate larger truck mirrors. Even so, this lift is only slightly larger than a typical parking space. Due to its reduced footprint, as well as its ability to house a variety of vehicle types in a low-ceiling garage, the HD-7W is an extremely attractive parking and maintenance solution for both homeowners and professional technicians.
Watch review from Woman.Driven on the HD-7 four-post lift!
Dependable design
The HD-7W features four stainless steel wire ropes, as well as a lone hydraulic cylinder that remains tucked underneath the runway. This powerful cylinder ensures you get a super-durable design that requires minimal maintenance over time.
Dual-hub wire rope sheaves
Larger wire rope sheaves prevent undue wear-and-tear on the four-post lift's axles, wire rope and even the sheaves themselves. Dual-hub and oversized sheaves provide a safer product that lasts longer and costs less to maintain. The larger the sheave, the less friction against the components, so we make every single sheave larger than necessary. Typically speaking, the bigger the lift, the bigger the sheave!
Multi-level locking positions
Parking and service height is totally up to you. Every few inches, the columns will automatically lock into place; simply lower the runways onto the lock as they move over it. Push-button controls will release all four locks together.
Secondary safety locks
A secondary lock system acts as a slack-cable device that catches the runways and keeps your vehicle level in case any dangerous cable slack develops. The lift will not be operational until you have a chance to resolve the issue.
Heavy-duty aircraft wire rope
Extremely powerful stainless steel wire ropes are rated at 14,400 lbs. each. They're called "aircraft quality" for a reason! The combined rating of these cables is more than 822% of the entire lift’s maximum lifting capacity, and all wire rope is fully enclosed within the lift structure.
Electric-hydraulic power system
A zero-service power unit is incorporated into the four-post lift structure. Dependable, long-lasting and extremely safe, it's always close at hand for your convenience.
Large base plates
10" x 12" base plates provide a stable yet minimal footprint for the HD-7W. Your four-post lift is as structurally sound as any car lift ever made.
Caster kit
A rugged, 4-piece caster kit makes your lift mobile, so you can get it out of the way for other service jobs or to simply park your vehicles in a different park of the garage. Foot-lock casters work with or without a vehicle raised on the runways.
Integrated design
For your safety and convenience, and to improve the aesthetics of your BendPak lift, the critical lifting components (e.g., airlines, safety latches and wire rope sheaves) are all fully enclosed within the columns of the lift.
Low-deck runways
Low-profile, 4.5" high runways make it easy to load vehicles onto the lift. Lower runways mean less time driving up the approach ramps; the result is a safer, easier approach.
Longer approach ramps
The effectiveness of the lowered runways is bolstered by gentle approach ramps that won't damage low-riding vehicles. Extended-length approach ramps permit drivers of all experience levels to load vehicles onto the runways without scratching the front ends of low-riding cars.
- 7,000-lb. maximum lifting capacity
- Wide drive-thru with tall lifting height and short runways
- Runways include rail-kit for optional accessories
- Runways include rail-kit for optional accessories
- Single hydraulic cylinder mounted underneath runway
- Internal anti-sway slider blocks in each column
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
BP-16
You will receive your personal $15 voucher with your order confirmation
Spend over $200 and get a $15 voucher for your next order
$15
$5,195.00 *
$10,519.88 *
(50.62% Saved)
Free shipping!
Delivery time 5-7 business days
Lift Type:
Secure payment
BendPak Wide Car Lift HD-7W, 7,000-lb. Capacity, 5175120
Add this item and enjoy fast shipping
Popular product! About people already have it in their shopping cart
Free SHIPPING - Directly from the manufacturer!
Top seller in the store!
Also order the matching accessories
BendPak Aluminum Deck, fits HD-7P, HD-7W, HD-9ST, HD-9, HD-9SW, Pair, 5210207
BendPak |
5210207
-53%
Content
1 Pair
$3,834.00
*
$1,800.00
*
BendPak Plastic Drip Trays fits HD-7 and HD-9 Series Lifts, Set of 2, 5700301
BendPak |
5700301
-54%
Content
2 Unit
($67.00 * / 1 Unit)
$289.44
*
$134.00
*
Show more accessories ()
Hide other accessories
Proven product
Top international brands already trust us!
Manufacturer: |
BendPak
|
Supplier number: | 5175120 |
UPC: | 849672001041 |
Technical specs:
- 7,000-lb. lifting capacity
- High lift with short runways
- Electric-hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
- High-speed lifting
- Features heavy-duty 3/8" aircraft cable
- Rugged 1.25" roller axles
- Multi-position safety locks in each column
- Adjustable lock ladders
- Ramps feature non-skid surface
- Push-button pneumatic safety release
- Optional 4,500-lb. capacity rolling jack available (Model RBJ4500)
- Style
- Style: Four-Post Parking Lift
- Capacity
- Lifting Capacity: 7,000
- A - Min. Runway Height: 4.5" (114 mm)
- B - Max. Rise: 82" (2,083 mm)
- C - Max. Lifting Height: 86.5" (2,197 mm)
- D - Overall Width: 99.75" (2,534 mm)
- E - Outside Length: 174" (4,420 mm)
- F - Overall Length: 200" (5,080 mm)
- G - Height of Columns: 100" (2,540 mm)
- H - Width Between Columns: 89.75" (2,280 mm)
- I - Drive-Thru Clearance: 76.5" (1,943 mm)
- J - Runway Width: 19" (483 mm)
- K - Length of Runways: 164" (4,166 mm)
- L - Width Between Runways: 37.5" (952 mm)
- M - Runway Centerline: 56.5" (1,435 mm)
- N - Outside Edge of Runways: 75.5" (1,918 mm)
- Time to Full Rise: 35 seconds
- Locking Positions: 15
- Lock Spacing: Every 4" (102 mm)
- Motor: 220 VAC / 60 Hz / 1 Ph
- Note: An air supply (minimum: 30 psi / 3 CFM) is may be required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
- Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
- WARNING: California Prop 65
BendPak Wide Car Lift HD-7W, 7,000-lb. Capacity, 5175120, 849672001041 Important: The vehicles...more
BendPak Wide Car Lift HD-7W, 7,000-lb. Capacity, 5175120, 849672001041
Important: The vehicles shown in the images are for illustration purposes only. The images may not be an exact representation of the product.
BendPak's HD-7W is the standard-width car lift model in the HD-7 series. With a 110.25" overall width and a spacious 100.25" spread between the columns, there’s plenty of room to park most cars and trucks in the lower position.
Dependable, Light-Duty 7,000-lb. Capacity Four-Post Lift
The 7,000-lb. capacity HD-7W is ideal for shops that want the versatility to park sports cars, sedans, light-duty trucks and SUVs in the same structure. There's even enough side clearance to accommodate larger truck mirrors. Even so, this lift is only slightly larger than a typical parking space. Due to its reduced footprint, as well as its ability to house a variety of vehicle types in a low-ceiling garage, the HD-7W is an extremely attractive parking and maintenance solution for both homeowners and professional technicians.
Watch review from Woman.Driven on the HD-7 four-post lift!
Dependable design
The HD-7W features four stainless steel wire ropes, as well as a lone hydraulic cylinder that remains tucked underneath the runway. This powerful cylinder ensures you get a super-durable design that requires minimal maintenance over time.
Dual-hub wire rope sheaves
Larger wire rope sheaves prevent undue wear-and-tear on the four-post lift's axles, wire rope and even the sheaves themselves. Dual-hub and oversized sheaves provide a safer product that lasts longer and costs less to maintain. The larger the sheave, the less friction against the components, so we make every single sheave larger than necessary. Typically speaking, the bigger the lift, the bigger the sheave!
Multi-level locking positions
Parking and service height is totally up to you. Every few inches, the columns will automatically lock into place; simply lower the runways onto the lock as they move over it. Push-button controls will release all four locks together.
Secondary safety locks
A secondary lock system acts as a slack-cable device that catches the runways and keeps your vehicle level in case any dangerous cable slack develops. The lift will not be operational until you have a chance to resolve the issue.
Heavy-duty aircraft wire rope
Extremely powerful stainless steel wire ropes are rated at 14,400 lbs. each. They're called "aircraft quality" for a reason! The combined rating of these cables is more than 822% of the entire lift’s maximum lifting capacity, and all wire rope is fully enclosed within the lift structure.
Electric-hydraulic power system
A zero-service power unit is incorporated into the four-post lift structure. Dependable, long-lasting and extremely safe, it's always close at hand for your convenience.
Large base plates
10" x 12" base plates provide a stable yet minimal footprint for the HD-7W. Your four-post lift is as structurally sound as any car lift ever made.
Caster kit
A rugged, 4-piece caster kit makes your lift mobile, so you can get it out of the way for other service jobs or to simply park your vehicles in a different park of the garage. Foot-lock casters work with or without a vehicle raised on the runways.
Integrated design
For your safety and convenience, and to improve the aesthetics of your BendPak lift, the critical lifting components (e.g., airlines, safety latches and wire rope sheaves) are all fully enclosed within the columns of the lift.
Low-deck runways
Low-profile, 4.5" high runways make it easy to load vehicles onto the lift. Lower runways mean less time driving up the approach ramps; the result is a safer, easier approach.
Longer approach ramps
The effectiveness of the lowered runways is bolstered by gentle approach ramps that won't damage low-riding vehicles. Extended-length approach ramps permit drivers of all experience levels to load vehicles onto the runways without scratching the front ends of low-riding cars.
Important: The vehicles shown in the images are for illustration purposes only. The images may not be an exact representation of the product.
BendPak's HD-7W is the standard-width car lift model in the HD-7 series. With a 110.25" overall width and a spacious 100.25" spread between the columns, there’s plenty of room to park most cars and trucks in the lower position.
Dependable, Light-Duty 7,000-lb. Capacity Four-Post Lift
The 7,000-lb. capacity HD-7W is ideal for shops that want the versatility to park sports cars, sedans, light-duty trucks and SUVs in the same structure. There's even enough side clearance to accommodate larger truck mirrors. Even so, this lift is only slightly larger than a typical parking space. Due to its reduced footprint, as well as its ability to house a variety of vehicle types in a low-ceiling garage, the HD-7W is an extremely attractive parking and maintenance solution for both homeowners and professional technicians.
Watch review from Woman.Driven on the HD-7 four-post lift!
Dependable design
The HD-7W features four stainless steel wire ropes, as well as a lone hydraulic cylinder that remains tucked underneath the runway. This powerful cylinder ensures you get a super-durable design that requires minimal maintenance over time.
Dual-hub wire rope sheaves
Larger wire rope sheaves prevent undue wear-and-tear on the four-post lift's axles, wire rope and even the sheaves themselves. Dual-hub and oversized sheaves provide a safer product that lasts longer and costs less to maintain. The larger the sheave, the less friction against the components, so we make every single sheave larger than necessary. Typically speaking, the bigger the lift, the bigger the sheave!
Multi-level locking positions
Parking and service height is totally up to you. Every few inches, the columns will automatically lock into place; simply lower the runways onto the lock as they move over it. Push-button controls will release all four locks together.
Secondary safety locks
A secondary lock system acts as a slack-cable device that catches the runways and keeps your vehicle level in case any dangerous cable slack develops. The lift will not be operational until you have a chance to resolve the issue.
Heavy-duty aircraft wire rope
Extremely powerful stainless steel wire ropes are rated at 14,400 lbs. each. They're called "aircraft quality" for a reason! The combined rating of these cables is more than 822% of the entire lift’s maximum lifting capacity, and all wire rope is fully enclosed within the lift structure.
Electric-hydraulic power system
A zero-service power unit is incorporated into the four-post lift structure. Dependable, long-lasting and extremely safe, it's always close at hand for your convenience.
Large base plates
10" x 12" base plates provide a stable yet minimal footprint for the HD-7W. Your four-post lift is as structurally sound as any car lift ever made.
Caster kit
A rugged, 4-piece caster kit makes your lift mobile, so you can get it out of the way for other service jobs or to simply park your vehicles in a different park of the garage. Foot-lock casters work with or without a vehicle raised on the runways.
Integrated design
For your safety and convenience, and to improve the aesthetics of your BendPak lift, the critical lifting components (e.g., airlines, safety latches and wire rope sheaves) are all fully enclosed within the columns of the lift.
Low-deck runways
Low-profile, 4.5" high runways make it easy to load vehicles onto the lift. Lower runways mean less time driving up the approach ramps; the result is a safer, easier approach.
Longer approach ramps
The effectiveness of the lowered runways is bolstered by gentle approach ramps that won't damage low-riding vehicles. Extended-length approach ramps permit drivers of all experience levels to load vehicles onto the runways without scratching the front ends of low-riding cars.
- 7,000-lb. maximum lifting capacity
- Wide drive-thru with tall lifting height and short runways
- Runways include rail-kit for optional accessories
- Runways include rail-kit for optional accessories
- Single hydraulic cylinder mounted underneath runway
- Internal anti-sway slider blocks in each column
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
Also order the matching accessories
BendPak Aluminum Deck, fits HD-7P, HD-7W, HD-9ST, HD-9, HD-9SW, Pair, 5210207
BendPak |
5210207
-53%
Content
1 Pair
$3,834.00
*
$1,800.00
*
BendPak Plastic Drip Trays fits HD-7 and HD-9 Series Lifts, Set of 2, 5700301
BendPak |
5700301
-54%
Content
2 Unit
($67.00 * / 1 Unit)
$289.44
*
$134.00
*
Show more accessories ()
Hide other accessories
Questions about the article
Your question:
Personal data:
Continue shopping
5175120