Manufacturer: |
BendPak
|
Supplier number: | 5175862 |
UPC: | 849672001430 |
Technical specs:
- 9,000-lb. maximum lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
- Two different ramp lengths to choose from
- Narrow width for space efficiency
- Freestanding design
- Perfect for parking, storage and service
- Runways accommodate narrow and standard vehicles
- Runways include rail-kit for optional accessories
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks and sheaves
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
- Features heavy-duty 3/8" aircraft cable
- Rugged 1.25" roller axles
- Multi-position safety locks in each column
- Adjustable lock ladders
- Push-button pneumatic safety release
- Independent backup slack-cable safety latches
- Customizable power unit location
- Removable approach ramps for additional drive-under clearance
- Longer approach ramps for low-ground clearance vehicles
- Optional drive-thru ramps available
- Optional drip trays available
- Optional solid deck available to increase storage capacity
- Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45)
- ETL Approved
- Critical Clearance Dimensions With Lift Parked On Lock
- Capacity
- Lifting Capacity*: 9000
- *Max Capacity / Front Axle: 4500
- *Max Capacity / Rear Axle: 4500
- Rise
- A- Min. Runway Height: 4.5
- B- Max. Rise: 70
- C- Max. Lifting Height: 74.5
- Time to Full Rise: 45 seconds
- Outside Dimensions
- D- Overall Width: 100.25
- E- Outside Length: 174
- F- Overall Length: 200
- G- Height of Columns: 88
- Inside Dimensions
- H- Width Between Columns: 89.75
- I- Drive-Thru Clearance: 76.5
- Runways
- J- Runway Width: 19
- K- Length of Runways: 164
- L- Width Between Runways: 37.5
- M- Runway Centerline: 56.5
- N- Outside Edge of Runways: 75.5
- Minimum Wheelbase
- Rated Capacity: 115
- 75% Capacity: 100
- 50% Capacity: 85
- 25% Capacity: 70
- Locking
- Locking Positions: 12
- Lock Spacing: Every 4" (102 mm)
- Power Unit
- Motor: 220 VAC / 60 Hz / 1Ph
- Noise: 45 dB
- Shipping
- Weight: 1,682 lbs. (762.9 kg)
- Dimensions: 166" x 22" x 42" (4,203 mm x 558 mm x 1,066 mm)
- Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
- Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
- WARNING: California Prop 65
BendPak Four-Post Lift HD-9STX, Narrow Width & High Lift, 9,000-lb. Capacity, 5175862,...more
BendPak Four-Post Lift HD-9STX, Narrow Width & High Lift, 9,000-lb. Capacity, 5175862, 849672001430
Important: The vehicles shown in the images are for illustration purposes only. The images may not be an exact representation of the product.
9,000-lb. Capacity, Narrow Width, High Lift - The HD-9STX is our tall and narrow four-post lift that combines a small horizontal footprint with extended-height runways, so higher-clearance vehicles can be easily parked underneath.
More Height in Less Floor Space
The HD-9STX is your 9,000-lb. rugged lifting solution for when you need get something heavy and high, but you don't have a lot of space on the ground. Perfect for vehicle storage and service—in the shop or garages with high ceilings. Whether you're a service professional or a DIY'er, BendPak’s got the right lift for you. This model is available with optional casters, drip-trays, jack platform and more.
With more height to work with, this lift does something others do not: it fits trucks and SUVs in the lower level. This is essential for parking purposes, especially if your lower-level vehicle is too heavy for the runways. A high-rise lift also increases the comfort of techs working underneath. Pulling transmissions and draining oil is safer and easier on high-rise car lift. The HD-9STX eliminates stooping and awkward straining when accessing the vehicle underbody. When you’re uncomfortable, you’re more likely to make mistakes, and there’s nothing better than a car lift that lifts to the perfect height. The HD-9STX maximizes versatility in a car lift that adapts to your height and lifestyle. The narrow designs fits in the same floor space as the HD-9ST but requires a bit more ceiling height to fully enjoy.
Important: The vehicles shown in the images are for illustration purposes only. The images may not be an exact representation of the product.
9,000-lb. Capacity, Narrow Width, High Lift - The HD-9STX is our tall and narrow four-post lift that combines a small horizontal footprint with extended-height runways, so higher-clearance vehicles can be easily parked underneath.
More Height in Less Floor Space
The HD-9STX is your 9,000-lb. rugged lifting solution for when you need get something heavy and high, but you don't have a lot of space on the ground. Perfect for vehicle storage and service—in the shop or garages with high ceilings. Whether you're a service professional or a DIY'er, BendPak’s got the right lift for you. This model is available with optional casters, drip-trays, jack platform and more.
With more height to work with, this lift does something others do not: it fits trucks and SUVs in the lower level. This is essential for parking purposes, especially if your lower-level vehicle is too heavy for the runways. A high-rise lift also increases the comfort of techs working underneath. Pulling transmissions and draining oil is safer and easier on high-rise car lift. The HD-9STX eliminates stooping and awkward straining when accessing the vehicle underbody. When you’re uncomfortable, you’re more likely to make mistakes, and there’s nothing better than a car lift that lifts to the perfect height. The HD-9STX maximizes versatility in a car lift that adapts to your height and lifestyle. The narrow designs fits in the same floor space as the HD-9ST but requires a bit more ceiling height to fully enjoy.
- 9,000-lb. maximum lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
- Freestanding design
- Freestanding design
- High-rise
- Perfect for parking, storage and service
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
BP-157
You will receive your personal $15 voucher with your order confirmation
Spend over $200 and get a $15 voucher for your next order
$15
$5,195.00 *
$10,909.50 *
(52.38% Saved)
Free shipping!
Delivery time 5-7 business days
Secure payment
BendPak Four-Post Lift HD-9STX, Narrow Width & High Lift, 9,000-lb. Capacity, 5175862
Add this item and enjoy fast shipping
Popular product! About people already have it in their shopping cart
Free SHIPPING - Directly from the manufacturer!
Top seller in the store!
Also order the matching accessories
BendPak Plastic Drip Trays fits HD-7 and HD-9 Series Lifts, Set of 2, 5700301
BendPak |
5700301
-54%
Content
2 Unit
($67.00 * / 1 Unit)
$289.44
*
$134.00
*
Show more accessories ()
Hide other accessories
Proven product
Top international brands already trust us!
Manufacturer: |
BendPak
|
Supplier number: | 5175862 |
UPC: | 849672001430 |
Technical specs:
- 9,000-lb. maximum lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
- Two different ramp lengths to choose from
- Narrow width for space efficiency
- Freestanding design
- Perfect for parking, storage and service
- Runways accommodate narrow and standard vehicles
- Runways include rail-kit for optional accessories
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks and sheaves
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
- Features heavy-duty 3/8" aircraft cable
- Rugged 1.25" roller axles
- Multi-position safety locks in each column
- Adjustable lock ladders
- Push-button pneumatic safety release
- Independent backup slack-cable safety latches
- Customizable power unit location
- Removable approach ramps for additional drive-under clearance
- Longer approach ramps for low-ground clearance vehicles
- Optional drive-thru ramps available
- Optional drip trays available
- Optional solid deck available to increase storage capacity
- Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45)
- ETL Approved
- Critical Clearance Dimensions With Lift Parked On Lock
- Capacity
- Lifting Capacity*: 9000
- *Max Capacity / Front Axle: 4500
- *Max Capacity / Rear Axle: 4500
- Rise
- A- Min. Runway Height: 4.5
- B- Max. Rise: 70
- C- Max. Lifting Height: 74.5
- Time to Full Rise: 45 seconds
- Outside Dimensions
- D- Overall Width: 100.25
- E- Outside Length: 174
- F- Overall Length: 200
- G- Height of Columns: 88
- Inside Dimensions
- H- Width Between Columns: 89.75
- I- Drive-Thru Clearance: 76.5
- Runways
- J- Runway Width: 19
- K- Length of Runways: 164
- L- Width Between Runways: 37.5
- M- Runway Centerline: 56.5
- N- Outside Edge of Runways: 75.5
- Minimum Wheelbase
- Rated Capacity: 115
- 75% Capacity: 100
- 50% Capacity: 85
- 25% Capacity: 70
- Locking
- Locking Positions: 12
- Lock Spacing: Every 4" (102 mm)
- Power Unit
- Motor: 220 VAC / 60 Hz / 1Ph
- Noise: 45 dB
- Shipping
- Weight: 1,682 lbs. (762.9 kg)
- Dimensions: 166" x 22" x 42" (4,203 mm x 558 mm x 1,066 mm)
- Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
- Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
- WARNING: California Prop 65
BendPak Four-Post Lift HD-9STX, Narrow Width & High Lift, 9,000-lb. Capacity, 5175862,...more
BendPak Four-Post Lift HD-9STX, Narrow Width & High Lift, 9,000-lb. Capacity, 5175862, 849672001430
Important: The vehicles shown in the images are for illustration purposes only. The images may not be an exact representation of the product.
9,000-lb. Capacity, Narrow Width, High Lift - The HD-9STX is our tall and narrow four-post lift that combines a small horizontal footprint with extended-height runways, so higher-clearance vehicles can be easily parked underneath.
More Height in Less Floor Space
The HD-9STX is your 9,000-lb. rugged lifting solution for when you need get something heavy and high, but you don't have a lot of space on the ground. Perfect for vehicle storage and service—in the shop or garages with high ceilings. Whether you're a service professional or a DIY'er, BendPak’s got the right lift for you. This model is available with optional casters, drip-trays, jack platform and more.
With more height to work with, this lift does something others do not: it fits trucks and SUVs in the lower level. This is essential for parking purposes, especially if your lower-level vehicle is too heavy for the runways. A high-rise lift also increases the comfort of techs working underneath. Pulling transmissions and draining oil is safer and easier on high-rise car lift. The HD-9STX eliminates stooping and awkward straining when accessing the vehicle underbody. When you’re uncomfortable, you’re more likely to make mistakes, and there’s nothing better than a car lift that lifts to the perfect height. The HD-9STX maximizes versatility in a car lift that adapts to your height and lifestyle. The narrow designs fits in the same floor space as the HD-9ST but requires a bit more ceiling height to fully enjoy.
Important: The vehicles shown in the images are for illustration purposes only. The images may not be an exact representation of the product.
9,000-lb. Capacity, Narrow Width, High Lift - The HD-9STX is our tall and narrow four-post lift that combines a small horizontal footprint with extended-height runways, so higher-clearance vehicles can be easily parked underneath.
More Height in Less Floor Space
The HD-9STX is your 9,000-lb. rugged lifting solution for when you need get something heavy and high, but you don't have a lot of space on the ground. Perfect for vehicle storage and service—in the shop or garages with high ceilings. Whether you're a service professional or a DIY'er, BendPak’s got the right lift for you. This model is available with optional casters, drip-trays, jack platform and more.
With more height to work with, this lift does something others do not: it fits trucks and SUVs in the lower level. This is essential for parking purposes, especially if your lower-level vehicle is too heavy for the runways. A high-rise lift also increases the comfort of techs working underneath. Pulling transmissions and draining oil is safer and easier on high-rise car lift. The HD-9STX eliminates stooping and awkward straining when accessing the vehicle underbody. When you’re uncomfortable, you’re more likely to make mistakes, and there’s nothing better than a car lift that lifts to the perfect height. The HD-9STX maximizes versatility in a car lift that adapts to your height and lifestyle. The narrow designs fits in the same floor space as the HD-9ST but requires a bit more ceiling height to fully enjoy.
- 9,000-lb. maximum lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
- Freestanding design
- Freestanding design
- High-rise
- Perfect for parking, storage and service
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
Also order the matching accessories
BendPak Plastic Drip Trays fits HD-7 and HD-9 Series Lifts, Set of 2, 5700301
BendPak |
5700301
-54%
Content
2 Unit
($67.00 * / 1 Unit)
$289.44
*
$134.00
*
Show more accessories ()
Hide other accessories
Questions about the article
Your question:
Personal data:
Continue shopping
5175862