Buy BendPak Two-Post Lift 10AP-168 Overall Height 168" 5175305 cheaply

Manufacturer:	BendPak
Supplier number:	5175305
UPC:	849672024316

Other items from BendPak

Technical specs:

Durable powder coat finish
Expandable top beam accommodates wide or narrow drive-thru configurations
Double-telescoping screw pads offer increased versatility
Padded overhead safety shutoff bar
Exclusive Bi-Metric arm design for more versatile arm positioning
Single-point safety release
Drop-end arms provide a lower pad heigh
Dual hydraulic direct-drive cylinders
Oversized 53" & 59" tall carriages for superior strength and durability
Electric / hydraulic HVLP power system
Self-lubricating dura-glide UHMW polyethylene bearing system
Safety locks in each column spaced every 3"
Automatic arm restraints withstand over 2000-pounds of side force
Heavy-duty 1/2" aircraft-quality equalizer cables
Oversized cable sheave diameter reduces cable fatigue
14-piece standard adapter set
Four triple-telescoping arms
ALI certified
Capacity
Lifting Capacity*: 10,000
*Max Capacity / Front Axle: 5000
*Max Capacity / Rear Axle: 5000
Rise
A- Rise: 75.5
B- Rise + Pad Only: 79.5
C- Rise + Pad + 63 mm Adapter: 89
D- Min. Height + Pad: 4
Time to Full Rise: ≈45 seconds
Outside Dimensions
E- Height Overall: 157
F- Width Overall: 135or145
G- Outside Columns: 127.5or137.5
Inside Dimensions
H- Inside Columns: 108.5or118.5
I- Drive-Thru Clearance: 97.5or107.5
J- Floor To Overhead Switch: 152
Arms & Pads
K- Front Arm Reach: (MIN): 24.5
K- Front Arm Reach: (MAX): 50
L- Rear Arm Reach: (MIN): 32
L- Rear Arm Reach: (MAX): 59.25
Screw Pad Adjustment: 2
Max Load Per Arm: 2,500
Floorplate
L- Height
M- Width
Power Unit
Motor: 220 VAC, 60 Hz, 1 Phase
Noise: 70 dB
Shipping
Weight
Dimensions
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
WARNING: California Prop 65

BendPak Two-Post Lift 10AP-168, Overall Height 168", 5175305, 849672024316 Important: The...more

Close menu

BendPak Two-Post Lift 10AP-168, Overall Height 168", 5175305, 849672024316

Important: The vehicles shown in the images are for illustration purposes only. The images may not be an exact representation of the product.

The 10AP-168 features an upper crossbar that’s positioned two feet higher to accommodate high roof cargo vans. Features 73" of lifting height and an overhead beam height of 168".

10,000-lb. lifting capacity
Expandable top beam accommodates wide or narrow drive-thru configuration
Double-telescoping screw pads offer increased versatility
Padded overhead safety shutoff bar
Exclusive Bi-Metric arm design for more versatile arm positioning
Dual hydraulic direct-drive cylinders

Restrictions

WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov

Hazardous material

You will receive your personal $15 voucher with your order confirmation

Spend over $200 and get a $15 voucher for your next order

$15

$5,895.00 * $12,644.78 * (53.38% Saved)

plus VAT Free shipping

Free shipping!

Delivery time 5-7 business days

Overall Height:

Secure payment

BendPak Two-Post Lift 10AP-168, Overall Height 168", 5175305

Add this item and enjoy fast shipping

Popular product! About people already have it in their shopping cart

Free SHIPPING - Directly from the manufacturer!

Top seller in the store!

Proven product

Top international brands already trust us!

Secure shopping

Free shipping from $50
Fast delivery
Your personal buyer protection

Manufacturer:	BendPak
Supplier number:	5175305
UPC:	849672024316

Other items from BendPak

Technical specs:

Durable powder coat finish
Expandable top beam accommodates wide or narrow drive-thru configurations
Double-telescoping screw pads offer increased versatility
Padded overhead safety shutoff bar
Exclusive Bi-Metric arm design for more versatile arm positioning
Single-point safety release
Drop-end arms provide a lower pad heigh
Dual hydraulic direct-drive cylinders
Oversized 53" & 59" tall carriages for superior strength and durability
Electric / hydraulic HVLP power system
Self-lubricating dura-glide UHMW polyethylene bearing system
Safety locks in each column spaced every 3"
Automatic arm restraints withstand over 2000-pounds of side force
Heavy-duty 1/2" aircraft-quality equalizer cables
Oversized cable sheave diameter reduces cable fatigue
14-piece standard adapter set
Four triple-telescoping arms
ALI certified
Capacity
Lifting Capacity*: 10,000
*Max Capacity / Front Axle: 5000
*Max Capacity / Rear Axle: 5000
Rise
A- Rise: 75.5
B- Rise + Pad Only: 79.5
C- Rise + Pad + 63 mm Adapter: 89
D- Min. Height + Pad: 4
Time to Full Rise: ≈45 seconds
Outside Dimensions
E- Height Overall: 157
F- Width Overall: 135or145
G- Outside Columns: 127.5or137.5
Inside Dimensions
H- Inside Columns: 108.5or118.5
I- Drive-Thru Clearance: 97.5or107.5
J- Floor To Overhead Switch: 152
Arms & Pads
K- Front Arm Reach: (MIN): 24.5
K- Front Arm Reach: (MAX): 50
L- Rear Arm Reach: (MIN): 32
L- Rear Arm Reach: (MAX): 59.25
Screw Pad Adjustment: 2
Max Load Per Arm: 2,500
Floorplate
L- Height
M- Width
Power Unit
Motor: 220 VAC, 60 Hz, 1 Phase
Noise: 70 dB
Shipping
Weight
Dimensions
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
WARNING: California Prop 65