JUMO dTRANS T05 Programmable Two-Wire Transmitter, 582219, 4053877000716, The transmitters record sensor signals from RTD temperature probes, thermocouples, resistance transmitters, or resistors/potentiometers. When using a resistor/potentiometer or RTD temperature probe, the sensor connection on the input side can be connected with a two-wire, three-wire, or four-wire circuit. Voltage signals in the range from -100 to +1100 mV can also be acquired., Features:Measuring input for RTD temperature probe, thermocouple, resistor/potentiometer, resistance transmitter, and voltageInput and output are galvanically isolatedControl LED (red/green)Configuration directly via USB cable without additional auxiliary voltageCustomer-specific linearizationDetection of the min./max. process value (drag indicator function including point in time)Option to specify the temperature in °F for temperature sensorsScrew terminals or spring-cage terminalsApplications:Process industryIndustrial furnace construction and the thermal industryPlant construction and mechanical engineeringFood industryPharmaceutical industryCooling systemsHeating and air conditioningPlastics industryRenewable energyWater and wastewater
JUMO EM-5 Panel-Mounted Thermostat up to 300 °C, 60000211, 4053877007432, Features:Liquid expansionSelf-monitoring in the event of a pressure dropSafety switch-off at -20 °C1, 2, 3, or 4 single-pole snap-action switches possibleApplications:In apparatus engineeringIn furnace constructionIn the heating and air conditioning industryIn laboratory and climatic cabinets
JUMO dTRON 308Q Controller with Program Function 96 x 48 mm, 442005, 4053877000129, dTRON 308Q Compact Controller with Program Function 96 x 48 mm, Features:Universal measurement input1 digital inputTwo-state/three-state continuous controller, three-step controller, continuous controllerInputs and outputs can be expanded in a modular structureTimer and ramp functionProgram with 8 sectionsMath and logic function4 limit value monitoring functionsModbus and PROFIBUS DP interfaceStandard: 1x universal measurement input, 2x digital inputs, 2x relays, 2x logic outputVoltage supply for two-wire transmitterApproval DIN EN 14597Applications:Control of temperatures, pressures, and other process variables
JUMO dTRON 316 Compact Controller No Analog Slot 48 x 48 mm, 441973, 4053877002130, dTRON 316 Compact Controller with Program Function No Analog Slot 48 x 48 mm, Features:Universal measurement input1 digital inputTwo-state/three-state continuous controller, three-step controller, continuous controllerInputs and outputs can be expanded in a modular structureTimer and ramp functionProgram with 8 sectionsMath and logic function4 limit value monitoring functionsModbus and PROFIBUS DP interfaceStandard: 1x universal measurement input, 2x digital inputs, 2x relays, 2x logic outputVoltage supply for two-wire transmitterApproval DIN EN 14597Applications:Control of temperatures, pressures, and other process variables
JUMO dTRON 304 Compact Controller No Analog Slot 96 x 96 mm, 475571, 4053877000150, dTRON 304 Compact Controller with Program Function No Analog Slot 96 x 96 mm, Features:Universal measurement input1 digital inputTwo-state/three-state continuous controller, three-step controller, continuous controllerInputs and outputs can be expanded in a modular structureTimer and ramp functionProgram with 8 sectionsMath and logic function4 limit value monitoring functionsModbus and PROFIBUS DP interfaceStandard: 1x universal measurement input, 2x digital inputs, 2x relays, 2x logic outputVoltage supply for two-wire transmitterApproval DIN EN 14597Applications:Control of temperatures, pressures, and other process variables
JUMO safetyM STB/STW Safety Temperature Monitor, AC, 548736, 4053877010401, SafetyM STB/STW Safety Temperature Limiter and Monitor AC, The safety temperature limiter (STB) and safety temperature monitor (STW) enable early and reliable detection of risks which could potentially result in personal injuries, environmental damage, or destruction of the production plant and production materials. Its primary task is to reliably monitor thermal processes and to switch plants to a safe operating status in the event of malfunctions. The measured value at the analog input can be recorded by various probes or standard signals. Limit value exceedance is indicated by the installed LED K1 and K2 (red) for each channel and the integrated alarm relay output switches the plant to safe operating status (alarm range).The device concept meets the stringent requirements of DIN EN 61508 and DIN EN 13849. The 1oo2D structure ensures reliable detection of faults, meaning that the device concept can also be used for applications subject to the Machinery Directive 2006/42/EC., Features:Can be configured as safety temperature limiter (STB) or safety temperature monitor (STW)1oo2D architectureApprovals for DIN EN 14597, SIL, PL (Performance Level), ULTwo relay outputs can be used as pre-alarm or limit value alarmPre-alarm absolute or adjustable as a margin from the limit valueLCD display with background lighting and plain text displaySetup program for configuration and archiving via USB interfaceWide voltage supply range from 110 to 240 V +10 %/-15 % or ACDC 20 to 30 VInternal and external unlocking possibleApplications:Fuse protection for burner controlMonitoring of heating elementsProtection for heat transfer oil systemsProtection of boiler plantsLevel monitoring
JUMO safetyM STB/STW Safety Temperature Monitor, AC/DC, 548737, 4053877010418, SafetyM STB/STW Safety Temperature Limiter and Monitor AC/DC, The safety temperature limiter (STB) and safety temperature monitor (STW) enable early and reliable detection of risks which could potentially result in personal injuries, environmental damage, or destruction of the production plant and production materials. Its primary task is to reliably monitor thermal processes and to switch plants to a safe operating status in the event of malfunctions. The measured value at the analog input can be recorded by various probes or standard signals. Limit value exceedance is indicated by the installed LED K1 and K2 (red) for each channel and the integrated alarm relay output switches the plant to safe operating status (alarm range).The device concept meets the stringent requirements of DIN EN 61508 and DIN EN 13849. The 1oo2D structure ensures reliable detection of faults, meaning that the device concept can also be used for applications subject to the Machinery Directive 2006/42/EC., Features:Can be configured as safety temperature limiter (STB) or safety temperature monitor (STW)1oo2D architectureApprovals for DIN EN 14597, SIL, PL (Performance Level), ULTwo relay outputs can be used as pre-alarm or limit value alarmPre-alarm absolute or adjustable as a margin from the limit valueLCD display with background lighting and plain text displaySetup program for configuration and archiving via USB interfaceWide voltage supply range from 110 to 240 V +10 %/-15 % or ACDC 20 to 30 VInternal and external unlocking possibleApplications:Fuse protection for burner controlMonitoring of heating elementsProtection for heat transfer oil systemsProtection of boiler plantsLevel monitoring