%
Huskie Tools Dieless Crimper Dieless, EP-630A
$2,271.51*
$3,248.26*
(30.07% saved)
Type:
Tool
Huskie Tools Dieless Crimper Dieless, EP-630A, The EP-630A is commonly used by electric utilities and contractors who prefer dieless compression to circumferential compression. the operator simply positions a connector in the jaws and pumps until the tool bypasses at 6.2 Ton of output. Three moveable nibs crimp the connector against a fourth stationary nib. A carrying case is included. NOTE: the EP-630A was designed to crimp Anderson style connectors, and other brand connectors manufactured to ANSI C119.4.
Designed to crimp Anderson connectors and other brand connectors manufactured to ANSI C119.4
Two-stage rapid advance
External pressure adjustment
Lugs and Splices #6 AWG – 500 MCM CU/AL
%
Huskie Tools Ratchet Cutter Plus Bag, Aluminum up to 500 MCM, R-750C
$387.59*
$534.87*
(27.54% saved)
Huskie Tools Ratchet Cutter Plus Bag, Aluminum up to 500 MCM, R-750C, The R-750C has a ratchet mechanism that has been designed to withstand the stress of 750 MCM copper and aluminum cables with a maximum O.D. of 1-3/4." the blades have a 100% cutting surface which provides the best possible cutting leverage. A thumb release lever allows the operator to back out of a cut when necessary. A locking mechanism closes the handles for easy storage. NOTE: DO NOT CUT STEEL.Rated for 750MCMThumb lever blade releaseRobust ratchet mechanism
%
Huskie Tools 12 Ton Streamline Compression Tool Kit (C-Head) Dual-Bay A/C Charger, 2 Batts (18V, 5Ah), SL-C7510
$3,620.89*
$5,250.29*
(31.03% saved)
Type:
12 Ton
Huskie Tools 12 Ton Streamline Compression Tool Kit (C-Head) Dual-Bay A/C Charger, 2 Batts (18V, 5Ah), SL-C7510, The SL-C7510 is a 12 Ton inline tool designed with an open C-head allowing easy placement over the cable. the tool operates on the Huskie Tools 18V/5.0Ah battery and offers 5 Yr. Tool / 3 Yr. Battery & Charger warranty.Protective brush guards help prevent accidental contact with energized circuitsAccepts all “U” type industry standard die sets.Open “C” head design allows for easy cable positioning and removal.180˚ rotating head for ease of use and manueverabilityTested up to 75kV – for use in live line applications without damage to internal circuitryCompatible with Huskie Tools 18V/5.0Ah BatteriesIntegrated LED light for working in low light conditions5 Yr. Tool/3 Yr. Battery and Charger WarrantyCopper Lugs and Splices to 750 MCMAluminum Lugs and Splices to 750 MCM
%
Huskie Tools Pressure Test Gauge for 12 Ton Tools, PG-4
$1,048.27*
$1,519.99*
(31.03% saved)
Type:
for 12 Ton Tools
Huskie Tools Pressure Test Gauge for 12 Ton Tools, PG-4, The PG-4 gauge is used to calibrate 12 ton output tools. It was designed to fit in all brands of 12 ton tools, and is supplied with U-type test dies. If you are using Kearney tools, specify PG-4K which comes with TDK-1 test dies. Our PG-4, PG-15, PG-58, & PG-610A gauges come complete with necessary dies, carrying case, and certification.
%
Huskie Tools 6 Ton Cable Bender Tool Kit (Cable Bend Jaw) with Dual-Bay A/C Charger, 2 Batts (18V, 5Ah), REC-7NDSLCB
$3,949.49*
$5,371.31*
(26.47% saved)
Huskie Tools 6 Ton Cable Bender Tool Kit (Cable Bend Jaw) with Dual-Bay A/C Charger, 2 Batts (18V, 5Ah), REC-7NDSLCB, The SL-7NDCB is a 6 Ton inline compression tool equipped with a cable bending head. the tool features a convenient pull-pin design for quick change-over between optional compression and cutting jaws. This tool operates on the Huskie 18V/5.0 Ah battery platform and offers a 5 Yr. Tool / 3 Yr. Battery & Charger WarrantyOptimized hydraulics offer 20% faster advance and 30% faster retraction speeds over previous modelsPatent pending Auto-Retract feature provides a user-selectable ON/OFF switch to enable or dis able automatic cycle retraction. Auto-Retract can also be stopped mid-cycle to speed repeat operation.Pull-Pin Design for Quick Jaw ChangeBright White, LED Lights for Working in Low Light ConditionsAudible Bypass when Predetermined Pressure is AchievedTested Up To 75kV5 Yr. Tool / 3 Yr. Battery and Charger Warranty
%
Huskie Tools 6 Ton Streamline Cable Bender Tool Kit (Cable Bend Jaw) with Dual-Charger, 2 Batts (18V, 5Ah), SL-7NDCB
$2,747.45*
$3,956.33*
(30.56% saved)
Huskie Tools 6 Ton Streamline Cable Bender Tool Kit (Cable Bend Jaw) with Dual-Charger, 2 Batts (18V, 5Ah), SL-7NDCB, The SL-7NDCB is a 6 Ton inline compression tool equipped with a cable bending head. the tool features a convenient pull-pin design for quick change-over between optional compression and cutting jaws. This tool operates on the Huskie 18V/5.0 Ah battery platform and offers a 5 Yr. Tool / 3 Yr. Battery & Charger WarrantyHead rotates 180° for ease of use and maneuverabilityPull-Pin Design for Quick Jaw ChangeBright White, LED Lights for Working in Low Light ConditionsAudible Bypass when Predetermined Pressure is AchievedTested Up To 75kV5 Yr. Tool / 3 Yr. Battery and Charger Warranty
%
Huskie Tools XPJ Jaw for the Sl-ND, SLXPJ-JAW
$395.31*
$565.29*
(30.07% saved)
Type:
XPJ
Huskie Tools XPJ Jaw for the Sl-ND, SLXPJ-JAW, Optional Crimping Jaw for SL-ND & REC-NDSL ToolsForged Jaws for Long LifeBrush guards help prevent accidental contact with energized linesPull-Pin Design for Quick Jaw Change
%
Huskie Tools Pressure Test Gauge for 6 Ton Dieless Tools, PG-630
$1,526.53*
$2,167.67*
(29.58% saved)
Huskie Tools Pressure Test Gauge for 6 Ton Dieless Tools, PG-630, This gauge is used to calibrate output pressure on all dieless 6 ton tools
%
Huskie Tools Gear-Driven Cable Cutter (2 1/8" Al and Cu) Tool Kit with A/C Charger, 2 Batts (4Ah), REC-54ACM
$3,272.15*
$4,450.12*
(26.47% saved)
Huskie Tools Gear-Driven Cable Cutter (2 1/8" Al and Cu) Tool Kit with A/C Charger, 2 Batts (4Ah), REC-54ACM, The REC-54ACM was designed to cut stranded copper cables and aluminum. the jaws will accept a maximum of 1500 MCM aluminum. the operation of this tool is the same as the REC-54M, but it has sharper blades for cutting only non-ferrous materials. Do not cut steel with this model, or blade damage will occur. the REC-54ACM comfortably fits into the lineman’s gloved hand, and repetitive ratcheting movement is entirely eliminated. We have rotated the handle 90° to the blade to achieve a more ergonomic and comfortable cutting position. Just a squeeze of the trigger is all it takes to make a cut and almost no muscle power is needed. As a result, the risk of sprains, strains, and lost time due to muscle related injuries can be significantly reduced. the moveable blade has wide gear teeth for extra power and full cutting traction. Gear guides are attached on both ends of the movable blade to align the gear teeth with the internal pinion gear.Ergonomically designed and balanced2-1/8” Jaw OpeningCuts up to 1500 MCM AlOne Hand OperationSafety Lockout SwitchUpgraded Motor and Gear SystemCompatible with all Huskie 14.4V Li-Ion batteriesDO NOT CUT ACSR OR STEEL. Consult factory for more information proper cutting tools.Tested up to 75kV – for use in live line applications without damage to internal circuitry5 Yr. Tool, Battery and Charger Warranty
%
Huskie Tools 8 Ton Cutting Tool Kit with Dual-Bay A/C Charger, 2 Batts (18V, 5Ah), Guy Wire (EHS) to 7/16 Inch, REC-S724H
$3,521.25*
$4,859.33*
(27.54% saved)
Guy Wire (EHS):
to 7/16 Inch
Huskie Tools 8 Ton Cutting Tool Kit with Dual-Bay A/C Charger, 2 Batts (18V, 5Ah), Guy Wire (EHS) to 7/16 Inch, REC-S724H, The REC-S724H was designed to cut the toughest steel used in construction today. It can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaws, acetylene torches and cable cutters. the REC-S724H was designed from the same hydraulic system as the REC-S724CC featuring a rapid advance ram for reduced cycle times. with the pull of the trigger, you can cut ACSR cables up to 477, standard guy wires to 5/8", and ground rods to 5/8". the specially designed flip-top latch and rotating head provide exceptional ease of use and maneuverability in tight working quarters. the REC-S724H has an overload bypass, which will "kick out" when tool reaches 8 tons or is attempting to cut materials beyond its capacities. NOTE: DO NOT CUT CASE HARDENED STEEL RODS. SEE REC-SB624CC, S-24CC, SP-24CC, S-32CC OR SP-32CC1.Optimized hydraulics offer 20% faster advance and 30% faster retraction speeds than previous generation tools.Patent pending Auto-Retract feature provides a user-selectable ON/OFF switch to enable or disable automatic cycle retraction. Auto-Retract can also be stopped mid-cycle to speed repeat operation.Latched cutting head for superior shear strength on tough materials.180˚ rotating head for ease of use and manueverabilityTested up to 75kV – for use in live line applications without damage to internal circuitryCompatible with Huskie Tools 18V/5.0Ah Batteries5Yr. Tool / 3Yr. Battery and Charger – Huskie Tools Limited Warranty
%
Huskie Tools 6 Ton Streamline Compression Tool Kit (ND Jaw) with Dual-Bay A/C Charger, 2 Batts (18V, 5Ah), SL-7ND
$2,602.23*
$3,617.10*
(28.06% saved)
Huskie Tools 6 Ton Streamline Compression Tool Kit (ND Jaw) with Dual-Bay A/C Charger, 2 Batts (18V, 5Ah), SL-7ND, The SL-7ND is a 6-ton, battery-operated, inline compression tool with interchangeable jaws. the pull-pin design allows for quick and easy jaw change with a total of ten available jaw options including six compression, three cutting and one cable bender. the SL-7ND inline tool is ergonomically balanced for one-handed operation and features an audible bypass when predetermined pressure is achieved. This tool operates on the Huskie Tools 18V/5.0Ah Li-Ion battery platform and offers a 5 Yr. tool / 3 Yr. battery and charger warranty.Pull-pin design allows quick change of ten optional jawsLightweight ergonomic design for easy one hand operationAccepts all “W”, “X”, and”O” type dies180˚ rotating head for ease of use in tight spacesAudible feedback provides completed cycle verificationForged jaws with protective brush guardsTested up to 75kV – for use in live line applications without damage to internal circuitryCompatible with Huskie Tools 18V/5.0Ah BatteriesIntegrated LED light for working in low light conditions5 Yr. Tool/3 Yr. Battery and Charger WarrantyCopper Lugs and Splices #8 AWG – 500 MCMAluminum Lugs and Splices #8 AWG – 300 MCMH-Taps up to 4/0-4/0ACSR up to 4/0Standard guy wire to 3/8 in.Soft locks to 3/8 in.Soft steel bolts to 3/8 in.
%
Huskie Tools Carrying Holster for the Sl-ND, SL-HLSTR
$138.49*
$186.96*
(25.93% saved)
Huskie Tools Carrying Holster for the Sl-ND, SL-HLSTR, The SL-HLSTR is designed to carry your SL-ND style tool or any manual hydraulic tool. the Huskie Tools Holster keeps your inline tool stored close by and the hook & loop closure allows you to quickly grab the tool from the pouch. Two large grommets make it easy to hang the holster inside a bucket. There’s a pocket and a key ring on the front for the extras you need while on the job. Each holster also comes with a carabiner.
Two grommets allow the holster to hang in a bucket
Durabel construction
Hook and Loop side closures for quick tool access
Side Pocket and Carabiner for Extras
%
Huskie Tools Dieless Crimp Head, EP-630HA
$1,435.17*
$2,081.00*
(31.03% saved)
Type:
Head
Huskie Tools Dieless Crimp Head, EP-630HA, The EP-630HA is a dieless remote head that requires an external 10,000 psi pumping source. It is designed to crimp Anderson connectors #10 str – 500 MCM bare Al and #10 sol – 500 MCM bare Cu. the EP-630HA is mostly used by electrical contractors who prefer dieless compression to circumferential compression. This tool is supplied with a 3/8" male, screw type coupler and carrying case. NOTE: the EP-630HA was designed to crimp Anderson style connectors, and other brand connectors manufactured to ANSI C119.4.Designed to Crimp Anderson Connectors and Other Brand Mfg. to ANSI C119.4Eliminates the Need for DiesProtective Rubber Boot on “C” HeadLugs and Splices #6 AWG – 750 MCM CU/AL
%
Huskie Tools Jaw with Kearney "O" Nest Die Jaw Only, K-JAW
$383.35*
$532.86*
(28.06% saved)
Huskie Tools Jaw with Kearney "O" Nest Die Jaw Only, K-JAW, Optional Crimping Jaw for ECO-EZ Compression ToolBrush guards help prevent accidental contact with energized linesAccepts All “W” and “X” Type DiesForged Jaws for Long Life
%
Huskie Tools Pressure Test Gauge for 6 Ton Tools, PG-15
$1,913.23*
$2,659.39*
(28.06% saved)
Type:
for 6 Ton Tools
Huskie Tools Pressure Test Gauge for 6 Ton Tools, PG-15, The PG-15 is designed to check pressure on Huskie 6 ton hydraulic tools (except for the ECO-EZ and SL-series tools). It is supplied with necessary adapter. Our PG-4, PG-15, PG-58, & PG-610A gauges come complete with necessary dies, carrying case, and certification.
%
Huskie Tools 12 Ton Compression Tool Kit with "C" Head, A/C Charger, 2 Batts (4Ah), REC-3410
$5,324.31*
$7,454.03*
(28.57% saved)
Huskie Tools 12 Ton Compression Tool Kit with "C" Head, A/C Charger, 2 Batts (4Ah), REC-3410, Huskie Tools is giving you more tool speed and easier handling with our REC-3410 battery powered compression tool. It features a rubber boot and it is designed to accommodate all 12 ton "U" type dies widely used throughout the electrical industry. the REC-3410 is faster and more compact than our previous model. It offers a wider handle opening with finger grooves, allowing easier access for gloved work. the base of the tool is contoured for stability and incorporates finger grooves for a better grip.Accepts all “U” type industry standard die sets.Open “C” head design allows for easy cable positioning and removal.Tested up to 75kV – for use in live line applications without damage to internal circuitry180˚ rotating head for ease of use and manueverabilityRapid AdvanceErgonomically designed and balancedAudible feedback provides completed cycle verificationCompatible with all Huskie Tools 14.4V BatteriesIncludes DIE-CASEProtective brush guards help prevent accidental contact with energized circuits5 Yr. Tool, Battery and Charger Warranty
%
Huskie Tools 12 Ton Compression Tool Kit with "C" Head (1.65"), A/C Charger, 2 Batts (4Ah), Rapid Advance, REC-3510
$6,515.75*
$9,317.52*
(30.07% saved)
Huskie Tools 12 Ton Compression Tool Kit with "C" Head (1.65"), A/C Charger, 2 Batts (4Ah), Rapid Advance, REC-3510, The REC-3510 is the largest in our line of battery operated 12 ton compression tools. the jaw opening is 1.65" and will accept mid-span copper and aluminum splices and lugs up to 750 MCM Cu/Al. When the sleeves are compressed they can be removed through the large jaw. This tool accepts all "U" type dies available on the market. A built-in, preset 10,000 psi bypass cartridge will audibly bypass when optimal pressure is achieved. Test dies accompanied with our PG-4 can confirm the output pressure when needed. the output pressure can be adjusted via a bypass port located at the top of the tool. This tool has the most universal range of all our self-contained batter-powered tools.Accepts all “U” type industry standard die sets.Open “C” head design allows for easy cable positioning and removal.Tested up to 75kV – for use in live line applications without damage to internal circuitry180˚ rotating head for ease of use and manueverabilityRapid AdvanceErgonomically designed and balancedAudible feedback provides completed cycle verificationCompatible with all Huskie Tools 14.4V BatteriesIncludes DIE-CASEProtective brush guards help prevent accidental contact with energized circuits5 Yr. Tool, Battery and Charger WarrantyCopper Lugs and Splices #8 – 750 MCMAluminum Lugs and Splices #10 – 750 MCM
%
Huskie Tools Gear-Driven Cable Cutter (Al/Cu) Tool Kit with A/C Charger, 2 Batts (4Ah), REC-50M
$2,659.47*
$3,776.45*
(29.58% saved)
Huskie Tools Gear-Driven Cable Cutter (Al/Cu) Tool Kit with A/C Charger, 2 Batts (4Ah), REC-50M, The REC-50M battery operated slicing tool cuts 2" cable with the touch of a finger. It features a powerful gear reduction motor that pulls a moveable blade through the toughest copper and aluminum cables. the REC-50M comfortably fits into the lineman’s gloved hand, and repetitive ratcheting movement is entirely eliminated. Just a squeeze of the rocker arm trigger is all it takes to make a cut and almost no muscle power is needed. As a result, the risk of sprains, strains, and lost time due to muscle related injuries can be significantly reduced. the moveable blade has wide gear teeth for extra power and full cutting traction. Gear guides are attached on both ends of the movable blade to align the gear teeth; with the internal pinion gear.Tested up to 75kV – for use in live line applications without damage to internal circuitryOne Hand OperationErgonomically designed and balancedFor Copper and Aluminum OnlyCompatible with all Huskie 14.4V Li-Ion batteriesDO NOT CUT ACSR OR STEEL. Consult factory for more information proper cutting tools.5 Yr. Tool, Battery and Charger Warranty
%
Huskie Tools Gear-Driven Cable Cutter (ACsr) Tool Kit with A/C Charger, 2 Batts (4Ah), REC-54M
$3,487.33*
$4,812.52*
(27.54% saved)
Huskie Tools Gear-Driven Cable Cutter (ACsr) Tool Kit with A/C Charger, 2 Batts (4Ah), REC-54M, The REC-54M is a heavy duty cable cutter primarily used to cut ACSR. It will cut up to 1590 MCM ACSR and copper cables up to 750 MCM. the large jaw opening will also accommodate aluminum cables up to 1500 MCM. Huskie Tools has notched both cutting blades to avoid the denting of the cutting surfaces when steel strand is encountered. We have rotated the handle 90° to the blade to achieve a more ergonomic and comfortable cutting position. This tool also incorporates a blade retainer, which keeps the blades from spreading apart while cutting steel cables. the REC-54M was designed for single and multi-stranded steel cores and aluminum cables. the powerful motor & gear drive allow the operator to cut through the toughest cables with just the pull of the trigger. NOTE: the REC-54M is not intended to cut guy wires, ground rod or bolts. for CLEAN CUTS ON COPPER & ALL ALUMINUM CABLE, PLEASE REFER the REC-50M & the REC-54ACM.Ergonomically designed and balanced2-1/8” Jaw OpeningCuts up to 1590 ACSROne Hand OperationSafety Lockout SwitchUpgraded Motor and Gear SystemCompatible with all Huskie 14.4V Li-Ion batteriesTested up to 75kV – for use in live line applications without damage to internal circuitry5 Yr. Tool, Battery and Charger Warranty
%
Huskie Tools 9 Ton Scissor-Type Cutting Tool Kit, Dual-Bay A/C Charger, 2 Batts (18V, 5Ah), REC-7105YC
$2,724.13*
$3,704.82*
(26.47% saved)
Huskie Tools 9 Ton Scissor-Type Cutting Tool Kit, Dual-Bay A/C Charger, 2 Batts (18V, 5Ah), REC-7105YC, The REC-7105YC is designed to cut copper and aluminum cables as well as lead-sheathed telecommunication cables. the extremely large jaws and scissor-type blades allow for easy cutting of large underground cables. the sidebar handle allows the user to stabilize and balance the tool. This tool also has a built-in bypass cartridge to avoid cutter damage for those cables that are beyond the cutter’s capacity. the open jaw design allows the user to scoop up cables that are against a wall, in hard to reach areas and on the ground. NOTE: DO NOT CUT STEEL.Optimized hydraulics offer 20% faster advance and 30% faster retraction cycles than previous generation tools for an overall reduction in wait time between compression or cutting cycles.Patent pending Auto-Retract feature provides a user-selectable ON/OFF switch to enable or disable automatic cycle retraction. Auto-Retract can also be stopped mid-cycle to speed repeat operation.Open scissor type cutting blades allow for easy cable insertion and positioning without the need to latch the head closed prior to cutting.Sidebar style handles designed for stability and ergonomic grip.180˚ rotating head for ease of use and manueverabilityTested up to 75kV – for use in live line applications without damage to internal circuitryCompatible with Huskie Tools 18V/5.0Ah BatteriesIntegrated LED light for working in low light conditions5Yr. Tool / 3Yr. Battery and Charger – Huskie Tools Limited Warranty
%
Huskie Tools 6.6 Ton Scissor-Type Cutting Tool Kit, Dual-Bay A/C Charger, 2 Batts (18V, 5Ah), REC-730Y
$3,776.71*
$5,287.39*
(28.57% saved)
Huskie Tools 6.6 Ton Scissor-Type Cutting Tool Kit, Dual-Bay A/C Charger, 2 Batts (18V, 5Ah), REC-730Y, The REC-730Y was designed to cut ACSR cables up to 336 MCM, as well as copper cables up to 500 MCM and aluminum cables up to 1.18" outside diameter. the hydraulic system features a rapid advance for reduced cycle times. All cuts are clean with a minimal amount of cable distortion, which allows for easy connector installation on cables. the open "C" type jaw is very convenient for the operator when reaching out to cut cable opposed to latching the cutter jaw around the cable. the head can be rotated 180° for greater maneuverability in tight working quarters. the keeper plate on the REC-730Y prevents jaws from spreading apart when cutting ACSR. NOTE: This tool is not recommended for cutting 4/0 Penguin or 3/0 Pigeon ACSR Cables.Optimized hydraulics offer 20% faster advance and 30% faster retraction speeds than previous generation tools.Patent pending Auto-Retract feature provides a user-selectable ON/OFF switch to enable or disable automatic cycle retraction. Auto-Retract can also be stopped mid-cycle to speed repeat operation.Latched cutting head for superior shear strength on tough materials.180˚ rotating head for ease of use and manueverabilityTested up to 75kV – for use in live line applications without damage to internal circuitryCompatible with Huskie Tools 18V/5.0Ah Batteries5Yr. Tool / 3Yr. Battery and Charger – Huskie Tools Limited Warranty
%
Huskie Tools 6.6 Ton Scissor-Type Cutting Tool Kit with Dual-Bay A/C Charger, 2 Batts (18V, 5Ah), REC-734YC
$3,932.53*
$5,662.84*
(30.56% saved)
Huskie Tools 6.6 Ton Scissor-Type Cutting Tool Kit with Dual-Bay A/C Charger, 2 Batts (18V, 5Ah), REC-734YC, Large copper cable cutting is finally made easy with the REC-734YC – just pull the trigger and 6.6 tons immediately goes to work for you. the hydraulic system now features a rapid advance for reduced cycle times. This tool is similar to the REC-730Y, but has a slightly larger jaw opening without a "keeper" guard. Its sharp blades are rated for copper and aluminum cables only, up to 800 MCM or 1.4" Al outside diameter. the open "C" type jaw is very convenient for the operator when reaching out to cut cable, as opposed to latching a cutting jaw around the cable. the jaws will accept a maximum of 800 MCM copper or aluminum cables up to 1.4." Distortion of the cable is minimal and cables can still be sleeved easily. Once the cable is severed, the cutter blades can be opened by the push of the release trigger located below the activation trigger – one finger is all that is needed to cut and release the tool. NOTE: DO NOT CUT STEEL.Optimized hydraulics offer 20% faster advance and 30% faster retraction speeds than previous generation tools.Patent pending Auto-Retract feature provides a user-selectable ON/OFF switch to enable or disable automatic cycle retraction. Auto-Retract can also be stopped mid-cycle to speed repeat operation.Latched cutting head for superior shear strength on tough materials.Open scissor type cutting blades allow for easy cable insertion and positioning without the need to latch the head closed prior to cutting.180˚ rotating head for ease of use and manueverabilityTested up to 75kV – for use in live line applications without damage to internal circuitryCompatible with Huskie Tools 18V/5.0Ah BatteriesIntegrated LED light for working in low light conditions5Yr. Tool / 3Yr. Battery and Charger – Huskie Tools Limited Warranty
%
Huskie Tools 12 Ton Compresor Tool Kit (C-Head) with Dual-Bay A/C Charger, 2 Batts (18V, 5Ah), CU/AL Splices to 600 MCM, REC-7430
$4,021.57*
$5,589.98*
(28.06% saved)
Huskie Tools 12 Ton Compresor Tool Kit (C-Head) with Dual-Bay A/C Charger, 2 Batts (18V, 5Ah), CU/AL Splices to 600 MCM, REC-7430, The REC-7430 is a 12 Ton tool designed for single-handed operation in overhead line applications and the open C-head allows fast easy placement over the cable. the tool operates on the Huskie Tools 18V/5.0Ah battery and offers 5 Yr. Tool / 3 Yr. Battery & Charger warranty.Optimized hydraulics offer 20% faster advance and 30% faster retractionPatent-pending selectable ON/OF Auto-RetractProtective brush guards help prevent accidental contact with energized circuitsDesigned for use in single-handed operation in overhead line applications.Accepts all “U” type industry standard die sets.Open “C” head design allows for easy cable positioning and removal.180˚ rotating head for ease of use and manueverabilityIntegrated LED light for working in low light conditionsTested up to 75kV – for use in live line applications without damage to internal circuitryCompatible with Huskie Tools 18V/5.0Ah Batteries5 Yr. Tool/3 Yr. Battery and Charger Warranty
%
Huskie Tools Gear-Driven Cable Cutter (Al/Cu Only) Tool Kit with Dual-Bay A/C Charger, 2 Batts (18V, 5Ah), REC-750M
$2,310.73*
$3,188.81*
(27.54% saved)
Huskie Tools Gear-Driven Cable Cutter (Al/Cu Only) Tool Kit with Dual-Bay A/C Charger, 2 Batts (18V, 5Ah), REC-750M, The REC-750M is a battery-operated slicing tool that cuts 2-inch cable with a squeeze of the rocker arm. A powerful gear reduction motor pulls a movable blade through the toughest copper and aluminum cables. This gear-driven cable cutter fits comfortably into a gloved hand and eliminates repetitive ratcheting movement. the moveable blade has wide gear teeth and guides for alignment with internal pinion gear.Informative LED status indicator for battery capacity and cycle verificationOverload circuit protection in the event maximum cable size is exceededAuto retract feature lets operator choose how far the blade retracts for maximum efficiency on repetitive cutting operationsBluetooth connectivity for easy data downloads and record retention2 in. Jaw OpeningTested up to 75kV – for use in live line applications without damage to internal circuitryIntegrated LED light for working in low light conditionsCompatible with Huskie Tools 18V/5.0Ah Batteries5Yr. Tool / 3Yr. Battery and Charger – Huskie Tools Limited Warranty
%
Huskie Tools 12 Ton Compresor Tool Kit (C-Head) with Dual-Bay A/C Charger, 2 Batts (18V, 5Ah), Splices to 750 MCM, REC-7510
$4,301.41*
$6,237.04*
(31.03% saved)
Type:
C-Head
Huskie Tools 12 Ton Compresor Tool Kit (C-Head) with Dual-Bay A/C Charger, 2 Batts (18V, 5Ah), Splices to 750 MCM, REC-7510, The REC-7510 is a 12 Ton tool designed for single-handed operation in overhead line applications and the open C-head allows fast easy placement over the cable. the tool operates on the Huskie Tools 18V/5.0Ah battery and offers 5 Yr. Tool / 3 Yr. Battery & Charger warranty.Optimized hydraulics offer 20% faster advance and 30% faster retractionPatent-pending selectable ON/OF Auto-RetractProtective brush guards help prevent accidental contact with energized circuitsDesigned for use in single-handed operation in overhead line applications.Accepts all “U” type industry standard die sets.Open “C” head design allows for easy cable positioning and removal.180˚ rotating head for ease of use and manueverabilityIntegrated LED light for working in low light conditionsTested up to 75kV – for use in live line applications without damage to internal circuitryCompatible with Huskie Tools 18V/5.0Ah Batteries5 Yr. Tool/3 Yr. Battery and Charger WarrantyCopper Lugs and Splices to 750 MCMAluminum Lugs and Splices to 750 MCM