aztec 21" Low Rider 18 HP Kawasaki with Dust Control, With Propane Tank, Key Start, Catalytic Muffler, 070-21-LRDThe LowRider burnisher with active-dust control for daily maintenance; featuring a patent pending vacuum system, improving indoor air quality (IAQ) by containing air particulates with a GS-42 green certified propane engine. Rugged, solid steel body design with an ultra low 4" (10cm) profile for buffing and polishing under racks and hard to reach areas. The LowRider has an advanced composite polymer pad driver and is available in 21", 24" and 27" pad sizes. Lowest emissions in the industry and highest safety features with CE, CARB, EPA, LEED US GREEN BUILDING certifications.Proudly MADE IN THE USA.
aztec 21" Low Rider 18 HP Kawasaki, With Propane Tank, Key Start, Catalytic Muffler, 070-21-LRThe LowRider burnisher, for daily maintenance, has a rugged, solid steel body design with an ultra low 4" (10cm) profile for buffing and polishing under racks and hard to reach areas. The LowRider will burnish floors at up to 27,000 sqft/hr with advanced composite polymer pad driver and dust control upgrade. The LowRider has an advanced composite polymer pad driver and is available in 21", 24" and 27" pad sizes. Lowest emissions in the industry and highest safety features with CE, CARB, EPA, LEED US GREEN BUILDING certifications. Proudly MADE IN THE USA.
aztec 24" Low Rider 18 HP Kawasaki, With Propane Tank, Key Start, Catalytic Muffler, 070-24-LRThe LowRider burnisher, for daily maintenance, has a rugged, solid steel body design with an ultra low 4" (10cm) profile for buffing and polishing under racks and hard to reach areas. The LowRider will burnish floors at up to 30,000 sqft/hr with advanced composite polymer pad driver and dust control upgrade. The LowRider has an advanced composite polymer pad driver and is available in 21", 24" and 27" pad sizes.Lowest emissions in the industry and highest safety features with CE, CARB, EPA, LEED US GREEN BUILDING certifications.Proudly MADE IN THE USA.
aztec Grand Finale 36 Spray Mist, Battery Powered Floor Finish Applicator, with option of 24" or 36" Head Assembly, 050-1SThe Grand Finale is a finish applicator designed to compliment the Sidewinder WorkSmart Stripping System. The Grand Finale provides an easy, high speed way to lay down a smooth, uniform coat of fresh finish. Now with the SPRAY FINALE upgrade, you can easily access those hard to reach areas.At up to 35,000 sqft/hr (3252 m2/h), that's 8x faster than mopping, you'll quickly recognize huge labor savings in the elimination of baseboard splash and product waste associated with finish puddlingFeatures:Portable, lightweight and durableAdjustable pressurized application flowReduce chemical usage by 30%Works with most floor finish up to 40% solidQuick and easy clean upBattery run time of 5-7 hoursIncludes (1) microfiber and (1) looped mop head for multi-purpose uses and applicationsAvailable in 24" (61 cm) and 36" (91.5 cm) mop head widthAztec's SPRAY GRAND FINALE 2-in-1 coatings applicator features a spray nozzle and flexible hose to access smaller areas; designed to apply floor finish, concrete densifiers, hardeners and sealers quickly and uniformly. The Spray Grand Finale provides an easy, high-speed way to lay down a smooth, uniform coat of chemicals at up to 35,000 sqft/hr. At 8x faster than the traditional mop and bucket method, the Spray Grand Finale eliminates baseboard splash and puddling, all while reducing chemical usage by 30% and eliminating strenuous labor and injury.As part the Aztec Sidewinder WorkSmart VCT Stripping System, all proudly MADE IN THE USA.
aztec 24" Low Rider 18 HP Kawasaki with Dust Control, With Propane Tank, Key Start, Catalytic Muffler, 070-24-LRDThe LowRider burnisher with active-dust control for daily maintenance; featuring a patent pending vacuum system, improving indoor air quality (IAQ) by containing air particulates with a GS-42 green certified propane engine. Rugged, solid steel body design with an ultra low 4" (10cm) profile for buffing and polishing under racks and hard to reach areas. The LowRider has an advanced composite polymer pad driver and is available in 21", 24" and 27" pad sizes. Lowest emissions in the industry and highest safety features with CE, CARB, EPA, LEED US GREEN BUILDING certifications.Proudly MADE IN THE USA.
aztec 30" Sidewinder with 18 HP Kawasaki, With Propane Tank, Key Start, Transport Wheel, Strip Brushes, Catalytic Muffler and Centrifugal Clutch, 010-603Propane Floor Stripping Solutionshe Aztec Sidewinder is designed for deep scrubbing and/or fast stripping of hard surface floors in preparation for top coat or restoring of VCT, terrazzo or close-fitted tile.FastThe Sidewinder™ strips 15,000 (or scrubs 30,000) square feet per hour with a 30" path and brush speed up to 1,295 RPM. 1.5 times faster than the nearest competitor. At that speed the Sidewinder is 10x faster than a corded electric machine and 3x faster than a battery powered machine. The Sidewinder's unique planetary drive and 3 counter-rotational brushes will strip up to 7 layers of wax in one pass.AggressiveUnique dual direction scouring action plus heavy brush pressure result in high productivity, with no side torque. Lowest emissions in the industry and highest safety features with CE, CARB, EPA, LEED US GREEN BUILDING certifications.Proudly MADE IN THE USA.
aztec Grand Finale 36, Battery Powered Floor Finish Applicator, with option of 24" or 36" Head Assembly, 050-1The Grand Finale is a finish applicator designed to compliment the Sidewinder WorkSmart Stripping System. The Grand Finale provides an easy, high speed way to lay down a smooth, uniform coat of fresh finish. Now with the SPRAY FINALE upgrade, you can easily access those hard to reach areas.At up to 35,000 sqft/hr (3252 m2/h), that's 8x faster than mopping, you'll quickly recognize huge labor savings in the elimination of baseboard splash and product waste associated with finish puddling.Features:Portable, lightweight and durableAdjustable pressurized application flowReduce chemical usage by 30%Works with most floor finish up to 40% solidQuick and easy clean upBattery run time of 5-7 hoursIncludes (1) microfiber and (1) looped mop head for multi-purpose uses and applicationsAvailable in 24" (61 cm) and 36" (91.5 cm) mop head widthAztec's SPRAY GRAND FINALE 2-in-1 coatings applicator features a spray nozzle and flexible hose to access smaller areas; designed to apply floor finish, concrete densifiers, hardeners and sealers quickly and uniformly. The Spray Grand Finale provides an easy, high-speed way to lay down a smooth, uniform coat of chemicals at up to 35,000 sqft/hr. At 8x faster than the traditional mop and bucket method, the Spray Grand Finale eliminates baseboard splash and puddling, all while reducing chemical usage by 30% and eliminating strenuous labor and injury.
aztec Liquidator 520, 36 Gallon Solution Applicator, 012-52The Liquidator lays down strip solution quickly and evenly in a 52" path. Hand triggers allow precise control of solution gravity fed from the 36 gallon solution tank. For smaller areas, the 52" width is easily adjusted down to 26" path. PRODUCTIVITY: Up to 45,000 square feet of solution in less than one hourADAPTABLE WIDTH:Spreader arm adjusts from 26" to 52" and is spring loaded to accommodate obstacles and narrow aislesPORTABLE:Weighs only 90 lbsDEPENDABLE:Manually powered: no cords, batteries or motorFeatures Include:Rugged solid steel frameStainless steel roller bearings for reliabilitySimple and user-friendlyEasy access for cleaning through 8" lid openingCorrosion proof polyethylene tank All of Aztec's equipment is proudly MADE IN THE USA!
aztec Guzzler 620, 36 Gallon Solution Retrieval Machine, 015-62The Aztec Guzzler is the ultimate in high-speed recovery of scrubbing and stripping solutions. Retrieve up to 30,000 sqft/hr at walking speed. The easy to use Guzzler will squeegee a floor at TWICE the speed of the other conventional recovery methods and will not create additional foaming. The Guzzler costs less to buy than one autoscrubber repair bill.PRODUCTIVITY:Twice the speed of an autoscrubber, with a 30" (76cm) squeegee path retrieves solution up to 30,000 sqft/hr (2787 m2/h).EFFICIENT:Up to 50% faster than other conventional recovery methods with no de-foamer required.DEPENDABLE:No motors, batteries or electric cords means no downtime for drained battery or blown fuse.PORTABLE:Dry weight of 65 lbs (30kg)Compact size and easy to maneuverAll of Aztec's equipment is proudly MADE IN THE USA!Aztec is a family owned manufacturer based in Philadelphia, PA
aztec 15" Edgewinder with 13 HP Honda, With Propane Tank, Key Start, Centrifugal Clutch, Strip Brush and Catalytic Muffler, 017-02The Aztec Edgewinder is a propane powered edger machine that reaches 26" to get deep under 4" racks and shelving. The Edgewinder is ideal for VCT floors and is highly productive for labor savings. Floating flexible guard contains strip solution, allows close contact with walls, shelving legs, corners, and other tight areas. Strip up to 50 linear feet per minute with the 14" diameter Stratagrit brush to dig out years of accumulated floor finish. Easily cuts through layers of edge build up. Strips at a walking pace and is safe for indoor use with the PurePowerLPG propane powered engine with low emissions.
aztec 27" Low Rider 18 HP Kawasaki, With Propane Tank, Key Start, Catalytic Muffler, 070-27-LRThe LowRider burnisher, for daily maintenance, has a rugged, solid steel body design with an ultra low 4" (10cm) profile for buffing and polishing under racks and hard to reach areas. The LowRider will burnish floors at up to 33,000 sqft/hr with advanced composite polymer pad driver and dust control upgrade. The LowRider has an advanced composite polymer pad driver and is available in 21", 24" and 27" pad sizes. Lowest emissions in the industry and highest safety features with CE, CARB, EPA, LEED US GREEN BUILDING certifications.Proudly MADE IN THE USA.
aztec 27" Low Rider 18 HP Kawasaki with Dust Control, With Propane Tank, Key Start, Catalytic Muffler, 070-27-LRDThe LowRider burnisher with active-dust control for daily maintenance; featuring a patent pending vacuum system, improving indoor air quality (IAQ) by containing air particulates with a GS-42 green certified propane engine. Rugged, solid steel body design with an ultra low 4" (10cm) profile for buffing and polishing under racks and hard to reach areas. The LowRider has an advanced composite polymer pad driver and is available in 21", 24" and 27" pad sizes. Lowest emissions in the industry and highest safety features with CE, CARB, EPA, LEED US GREEN BUILDING certifications.Proudly MADE IN THE USA.
aztec 24" Sidewinder with 18 HP Kawasaki, With Propane Tank, Key Start, Transport Wheel, Strip Brushes, Catalytic Muffler and Centrifugal Clutch, 01024-603Propane Floor Stripping SolutionsThe Aztec Sidewinder is designed for deep scrubbing and/or fast stripping of hard surface floors in preparation for top coat or restoring of VCT, terrazzo or close-fitted tile.FastThe Sidewinder™ strips 12,000 (or scrubs 24,000) square feet per hour with a 24" path and brush speed up to 1,150 RPM. At that speed the Sidewinder is exponentially faster than a corded electric machine and 3x faster than a battery powered machine. The Sidewinder's unique planetary drive and 3 counter-rotational brushes will strip up to 7 layers of wax in one pass.AggressiveUnique dual direction scouring action plus heavy brush pressure result in high productivity, with no side torque. Lowest emissions in the industry and highest safety features with CE, CARB, EPA, LEED US GREEN BUILDING certifications.Proudly MADE IN THE USA.