Stiebel Eltron SB 300 E Single Heat Exchanger Indirect Storage Tank, 79 gallon, 234110, 040232177194
The vessels and heat exchangers in SBB/SB-E tanks are made from heavy gauge steel. All surfaces in contact with domestic hot water receive a thick porcelain enamel coating after shot-peening to clean the steel surface. In addition, vessel exteriors receive a light porcelain coating. Up to three inches of urethane foam insulation ensures that hot water stays hot, and standby heat loss is minimized. All SBB/SB-E tanks come with heavy-duty sacrificial anodes and visible anode wear indicators. SBB/SB-E tanks are also fitted with an extra-large clean-out port for ease of maintenance.
All Stiebel Eltron SBB/SB-E series tanks are made in our factories in Germany and Slovakia. They can be used in residential or commercial installations as indirectly-fired domestic hot water storage tanks in conjunction with any type of boiler, geothermal, or solar hot water application.
Stiebel Eltron SBB series tanks are equipped with either one or two large-bore heat exchangers, designed to maximize heat transfer. For solar thermal applications, an SBB tank can be used with an external backup heater, or an SB-E tank with its integral electric element can be used. Dual heat exchanger models are typically used in solar thermal applications by connecting the lower coil to the collector array, and the upper coil connected to any type of boiler for backup heat input or as a takeoff for a radiant heating loop. Black and silver speaker illustration, Hot water outlet Electrical- junction box Heating element Clean-out port Sacrificial anode Heat exchanger coil Auxiliary ports Cold -water inlet.
Black and silver round speaker
Integral 3.0 kW sleeved heating element can be replaced without draining tank
Solar-ready
Powder-coated steel outer jacket
Standard junction box for electrical connection
All connections are NPT
Superb quality results in long service life
Sacrificial anode rod
Low standby heat loss
Two auxiliary ports
Backed by a 10-year limited warranty
New SB-E Tanks with Single Heat Exchanger and Electric Element
Stiebel Eltron SB 300 E Single Heat Exchanger Indirect Storage Tank, 79 gallon, 234110, 040232177194
The vessels and heat exchangers in SBB/SB-E tanks are made from heavy gauge steel. All surfaces in contact with domestic hot water receive a thick porcelain enamel coating after shot-peening to clean the steel surface. In addition, vessel exteriors receive a light porcelain coating. Up to three inches of urethane foam insulation ensures that hot water stays hot, and standby heat loss is minimized. All SBB/SB-E tanks come with heavy-duty sacrificial anodes and visible anode wear indicators. SBB/SB-E tanks are also fitted with an extra-large clean-out port for ease of maintenance.
All Stiebel Eltron SBB/SB-E series tanks are made in our factories in Germany and Slovakia. They can be used in residential or commercial installations as indirectly-fired domestic hot water storage tanks in conjunction with any type of boiler, geothermal, or solar hot water application.
Stiebel Eltron SBB series tanks are equipped with either one or two large-bore heat exchangers, designed to maximize heat transfer. For solar thermal applications, an SBB tank can be used with an external backup heater, or an SB-E tank with its integral electric element can be used. Dual heat exchanger models are typically used in solar thermal applications by connecting the lower coil to the collector array, and the upper coil connected to any type of boiler for backup heat input or as a takeoff for a radiant heating loop. Black and silver speaker illustration, Hot water outlet Electrical- junction box Heating element Clean-out port Sacrificial anode Heat exchanger coil Auxiliary ports Cold -water inlet.
Black and silver round speaker
Integral 3.0 kW sleeved heating element can be replaced without draining tank
Solar-ready
Powder-coated steel outer jacket
Standard junction box for electrical connection
All connections are NPT
Superb quality results in long service life
Sacrificial anode rod
Low standby heat loss
Two auxiliary ports
Backed by a 10-year limited warranty
New SB-E Tanks with Single Heat Exchanger and Electric Element
Secure payment
Popular product! About people already have it in their shopping cart
Free SHIPPING - Directly from the manufacturer!
Top seller in the store!
