Manufacturer: |
PCE Instruments
|
Supplier number: | FM100-SY-500-2000 |
UPC: | 4260650210013 |
Technical specs:
- Measurement area 0 2000 N
- Accuracy +/ 3 N or 3 % of the measured value
- Resolution 1 N
- Stiffness 500 N/mm
- Gap width 50 mm
- Diameter 80 mm
- Measurement principle DMSCUNDER
- Storage 80 measurements
- Cold frequency / rate 500 Hz / 2 ms
- Power supply SEB2 Battery 9 VBlock ZB 6LR61
- Battery voltage monitoring yes
- Environmental conditions
- Operating temperature range 10 to +40 °C
- Storage temperature range 40 to +50 °C
- Moisture max 90% relf not condenses
- Dimensions 210 x 80 x 50 mm
- Weight 21 kg
PCE Instruments Closing Force Transducer for Doors and Gates, FM100-SY-500-2000, 4260650210013...more
PCE Instruments Closing Force Transducer for Doors and Gates, FM100-SY-500-2000, 4260650210013
The power buyer is an electronic measuring device for foreign power -powered doors and gates. Typical use is both the final acceptance for new systems and the regular review. Its uncompromising construction combines precision with practical robustness and ensures precise measurements even after years of use in a rough environment.
With cyclical measurements on systems with several doors and gates, a quick, simple implementation is of great importance. Drive test has developed software that drastically reduces the process of measurements and the effort for the documentation.
With just a few operating steps, the measurements of a complete system can be taken over, printed out in a tabular form and stored in a database. We provide suitable interfaces (e.g. Microsoft DLL or National Instruments Labview) for integration into an automated testing.
The power buyer is an electronic measuring device for foreign power -powered doors and gates. Typical use is both the final acceptance for new systems and the regular review. Its uncompromising construction combines precision with practical robustness and ensures precise measurements even after years of use in a rough environment.
With cyclical measurements on systems with several doors and gates, a quick, simple implementation is of great importance. Drive test has developed software that drastically reduces the process of measurements and the effort for the documentation.
With just a few operating steps, the measurements of a complete system can be taken over, printed out in a tabular form and stored in a database. We provide suitable interfaces (e.g. Microsoft DLL or National Instruments Labview) for integration into an automated testing.
- Support of relevant standards EN 12445/12453, EN 60335-2, DIN V 18650, ASR A1.7, etc.
- Precise measurements
- Robust design
- Ease of use operate with a single button or remotely via Microsoft DLL interface or National Instruments LabView library
- Complete scope of delivery including high-quality transport case and software
- Professional, comprehensive PC software PinchPilot
- Comprehensive user support calibration service, standard change service guaranteed
- Software support integration into existing software structures possible
- Extensive systems can be measured in one run
- 1 x force manufacturer FM100 with 2.5 m connection cable
- 1 x separate measured value recording module (display device SEB2) with LCD display, LED display, film button and serial interface
- 1 x 9 V block battery
- 1 x transport case with foam insert for the complete scope of delivery
- 1 x PC connection cable (USB)
- 1 x USB dates with PC evaluation software pinch pilot and documentation
- 1 x manual
- 1 x ISO calibration certificate
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
PC-556
You will receive your personal $15 voucher with your order confirmation
Spend over $200 and get a $15 voucher for your next order
$15
$1,884.60 *
$2,581.90 *
(27.01% Saved)
Free shipping!
Delivery time 3-5 business days
Secure payment
PCE Instruments Closing Force Transducer for Doors and Gates, FM100-SY-500-2000
Add this item and enjoy fast shipping
Popular product! About people already have it in their shopping cart
Free SHIPPING - Directly from the manufacturer!
Top seller in the store!
Proven product
Top international brands already trust us!
Secure shopping
- Free shipping from $50
- Fast delivery
- Your personal buyer protection
Manufacturer: |
PCE Instruments
|
Supplier number: | FM100-SY-500-2000 |
UPC: | 4260650210013 |
Technical specs:
- Measurement area 0 2000 N
- Accuracy +/ 3 N or 3 % of the measured value
- Resolution 1 N
- Stiffness 500 N/mm
- Gap width 50 mm
- Diameter 80 mm
- Measurement principle DMSCUNDER
- Storage 80 measurements
- Cold frequency / rate 500 Hz / 2 ms
- Power supply SEB2 Battery 9 VBlock ZB 6LR61
- Battery voltage monitoring yes
- Environmental conditions
- Operating temperature range 10 to +40 °C
- Storage temperature range 40 to +50 °C
- Moisture max 90% relf not condenses
- Dimensions 210 x 80 x 50 mm
- Weight 21 kg
PCE Instruments Closing Force Transducer for Doors and Gates, FM100-SY-500-2000, 4260650210013...more
PCE Instruments Closing Force Transducer for Doors and Gates, FM100-SY-500-2000, 4260650210013
The power buyer is an electronic measuring device for foreign power -powered doors and gates. Typical use is both the final acceptance for new systems and the regular review. Its uncompromising construction combines precision with practical robustness and ensures precise measurements even after years of use in a rough environment.
With cyclical measurements on systems with several doors and gates, a quick, simple implementation is of great importance. Drive test has developed software that drastically reduces the process of measurements and the effort for the documentation.
With just a few operating steps, the measurements of a complete system can be taken over, printed out in a tabular form and stored in a database. We provide suitable interfaces (e.g. Microsoft DLL or National Instruments Labview) for integration into an automated testing.
The power buyer is an electronic measuring device for foreign power -powered doors and gates. Typical use is both the final acceptance for new systems and the regular review. Its uncompromising construction combines precision with practical robustness and ensures precise measurements even after years of use in a rough environment.
With cyclical measurements on systems with several doors and gates, a quick, simple implementation is of great importance. Drive test has developed software that drastically reduces the process of measurements and the effort for the documentation.
With just a few operating steps, the measurements of a complete system can be taken over, printed out in a tabular form and stored in a database. We provide suitable interfaces (e.g. Microsoft DLL or National Instruments Labview) for integration into an automated testing.
- Support of relevant standards EN 12445/12453, EN 60335-2, DIN V 18650, ASR A1.7, etc.
- Precise measurements
- Robust design
- Ease of use operate with a single button or remotely via Microsoft DLL interface or National Instruments LabView library
- Complete scope of delivery including high-quality transport case and software
- Professional, comprehensive PC software PinchPilot
- Comprehensive user support calibration service, standard change service guaranteed
- Software support integration into existing software structures possible
- Extensive systems can be measured in one run
- 1 x force manufacturer FM100 with 2.5 m connection cable
- 1 x separate measured value recording module (display device SEB2) with LCD display, LED display, film button and serial interface
- 1 x 9 V block battery
- 1 x transport case with foam insert for the complete scope of delivery
- 1 x PC connection cable (USB)
- 1 x USB dates with PC evaluation software pinch pilot and documentation
- 1 x manual
- 1 x ISO calibration certificate
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
Questions about the article
Your question:
Personal data:
Continue shopping
FM100-SY-500-2000