North Slope Chillers 30-Gallon Drum Cooling Jacket with Insulation Wrap, FLUX30

North Slope Chillers 30-Gallon Drum Cooling Jacket with Insulation Wrap, FLUX30, 814491016736

Fluxwrap by North Slope Chillers 30-Gallon Fluxwrap Jacket w/additional Insulation Wrap

Flux Wrap products make it easy and cost-effective to cool various applications like spray foam, coatings, adhesives, fermentation systems, electric motors. Flux Wrap can chill a wide range of materials in buckets, drums, IBC totes, tanks and all manner of vessels even when a heat exchanger is not currently present. Flux Wraps allow chilling to be applied to many vessels that were previously not able to be chilled or in situations that previously were not financially feasible. Then simply change the temperature of the fluid, and you have an effective medium for heating. Flux Wrap is a versatile fluid temperature control solution.

Wrap the cooling jacket around your 30-gallon drum, connect the hoses on the cooling jacket to the inlet valve on your industrial chiller. Wrap the white vinyl 1/2" insulation blanket around the Flux Wrap when operating to help with performance. Plug your industrial chiller in and chill your application, that is all there is to it. The chiller circulates the hot or cold fluid through the Flux Wrap jacket and either warms or cools the contents of your 30-gallon drum container. With a Flux Wrap jacket, you can efficiently regulate temperature-sensitive material under both regular and hot conditions.

• Ready-to-ship Flux Wrap products available for 5-gallon buckets, 15, 30, & 55-gallon drums, and 275-gallon IBC tanks. Custom systems can be designed and shipped within 2 weeks.
• Our proprietary multi-channel fluid path allows maximum flow with a minimal pressure drop
• Full coverage and elastic strap design ensures a snug fit and good thermal conductivity between the blanket and the drum
• The Flux Wrap jacket conforms to the 30-gallon barrel to maintain thermal contact even on uneven surfaces
• Lightweight, compact design saves space and makes moving easy
• Includes 1/2" insulated wrap designed to control condensation and improve efficiency
• Full coverage cooling
• Control temperature of your equipment or bulk materials
• When products & materials are delivered too hot, waiting for the material to cool can mean hours or days of lost production costing you money
• All Flux Wrap jackets should be used with an industrial chilling unit to pump the fluid through the jacket. Call us today to speak with our North Slope Chiller experts to determine what North Slope Industrial Chiller is right for your application.
• Industrial chiller shown in the picture is not included and can be purchased from North Slope Chillers or Powerblanket separately

Specifications:
• Model: FLUX30
• Designed to fit: 30-Gallon Drum or Barrel
• Product Length: 60"
• Product Width: 23 1/4"
• Product Thickness: .02" (0.58" inflated)
• Construction Material: 210D Nylon
• Maximum Pressure Rating: 6 PSI @ inlet
• Flow Rate: 4 GPM @ 5 PSI
• Connection: 3/4" Barbed Fitting
• Min/Max Surface Temperature: -10 °F/150 °F (-23.3 °C/65.5 °C)
• Upper-Temperature Limit: 120 °F (Water) 50 °F (Water/Glycol)
• Cooling Fluid: Water (if fluid temp is greater than 45 °F) -OR- Propylene Glycol/Water (1:1 max ratio) -OR- Ethylene Glycol/Water (1:1 max ratio)
• Approximate Fluid Volume: 5/8 Gallons
• Condensation Warning: When running cold fluid through the fluid channel jacket condensation can build up on the fluid paths. If condensation is a concern it is recommended that an insulated wrap is installed over the product. Powerblanket is not liable for damages due to condensation. The included Flux Wrap Insulated Wrap is designed to control condensation and improve efficiency.

Warning and Safety:
• Never exceed the maximum pressure rating
• Do not puncture or cut the product
• Always secure barbed fittings with a hose clamp to prevent the possibility of the hose coming off
• Never have hoses or tubing cross a walkway or other places where they will become a tripping hazard
• Only use acceptable fluids
• Only install on clean surfaces free of any sharp objects that could puncture the jacket
• Always have fluid flow from top to bottom
• Never exceed the temperature rating of the Flux Wrap jacket
• Never connect a smaller hose on the exit than what the Flux Wrap jacket is designed for

Note: Picture may differ from actual product.