GEDORE red R21000108 Universal set ALL-IN 106 pieces, 3301642

GEDORE red R21000108 Universal set ALL-IN 106 pieces, 3301642, 4060833016421

Ratchet 1/2", Extension 1/2" 125.
250 mm, Universal joint 1/2", Socket 1/2" hexagon 8.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
22.
24.
27.
30.
32 mm, Holding rail 8", Adaptor 1/2" for holding rail, Ratchet 1/4", Extension 1/4".
100 mm, Socket 1/4" hexagon 4.
4.5.
5.
5.5.
6.
7.
8.
9.
10.
11.
12.
13.
14 mm, Bit-Box, 31 pieces, Ratchet wrench, metric: Following DIN 3113, ISO 3318, straight form, jaw position 15°, surface satin matt chrome plated, chrome vanadium steel, Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge, Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, 2-component-handle, chrome-vanadium steel, Power side cutter: To DIN ISO 5749, high degree of cutting performance, inductively hardened, long cutting edges, 2-component-handle, chrome-vanadium steel, Bent nose telephone pliers, straight: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, 2-component-handle, chrome-vanadium steel, Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II, 2C screwdriver: Slot and cross-slotted PH, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle, Hexagon socket key: To DIN ISO 2936, hardened throughout, chrome-vanadium steel, phosphated, in holder, Flat cold chisel, flat oval: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel, Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated, Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel, Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel, Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel, Utility knife: Blade 18 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades (100mm long, 0.4mm thick), with sharpener, Bit box: Drive adaptor with magnetic bit locking, hexagon drive to DIN 3126 ISO 1173 - C 6.3, machine operated, phosphated, plastic box, Bit screwdriver: 2-component-handle, hex recess drive to DIN 3126 - D 6.3 (1/4") for bits, magnet, elongated hole in the handle, chrome-vanadium steel