Cuttermasters Production Support Package for Countersinks, Step Drills and Taps, diameter: 5", CBN, CM-PS2 C5

Cuttermasters Production Support Package for Countersinks, Step Drills and Taps, diameter: 5", CBN, CM-PS2 C5

CM-PS2 Cuttermasters Production Support for Countersinks, Step Drills and Taps. The Cuttermasters Production Support Package, CM-PS2 is a package deal on a six piece countersink, step drill and tap cam set and face wheel. We selected the most common clearances in single/zero flute, two /four flute, and three/six flute countersinks. With this package, you have our recommended set up for step drills, countersinks and taps (up to 3/8″) on a Cuttermaster type grinder. It also includes a CBN Face wheel which is good for large countersink faces. Set up for grinding countersinks (zero, 1-flute, 2-flute, 3-flute, 4-flute, 6-flute, 8-flute), step drills and taps (taps up to 3/8″) on a CUTTERMASTER Zero and 1-Flute, two cams: .02” and .03” lift
2-Flute, two cams: .04” and .065” lift
3-Flute, two cams: .31” and .062” lift Build for our modern tool grinders and appropriate for older grinders like the MG-30, HDT-30, and CM-01 as well. Choose CBN for high speed steel countersinks or Diamond for Carbide. Choose 5″ or 6″ diameter face wheel (standard wheel guard size for Cuttermasters is 5″). The 5″ diameter wheel has 1-1/4″ plated face while the 6″ diameter wheel has 1-7/8″ inch plated face 5″ Face Wheel.

• 0.76″ wide
• 5″ diameter
• 1.875″ plated face
• 1.25″ arbor

Do you need a 6" wheel guard? Sharpen Countersinks on CUTTERMASTER. Grind Countersinks, step drills and Taps (taps up to 3/4") on a Cuttermaster

• Zero and 1-Flute, two cams: .02” and .03” lift
• 2-Flute, two cams: .04” and .065” lift
• 3-Flute, two cams: .31” and .062” lift
• Cam follower and tensioner
• Choose CBN for HSS countersinks or Diamond for Carbide
• Choose 5" or 6" diameter face wheel (standard Cuttermaster wheel guard is 5")