Cuttermasters ER32 Motor Spindle for Shank Grinding, Shank Reduction / Cut Off, CM-ER32M

Cuttermasters ER32 Motor Spindle for Shank Grinding, Shank Reduction / Cut Off, CM-ER32M

• Designed for production use grinding of cylinders such as carbide and HSS end mill neck reductions and tool cut off
• Collet chucks are individually selected for accuracy
• Bolt to any table with T-slot in x or y direction
• Plug into 110V(220) or battery-powered
• Includes 10pc ER32 collet set (1/8”-7/8”)

It consists of as ER 32 collet chuck in a Bench mounted honed housing, driven by a timing belt and a small 24 volt DC motor it is designed to be used all day the collet chuck are chosen based on accuracy. there is a bolt pattern that allows you to be bolted to any table with a t slot in either X or Y Direction. Taper run-out is less than .0005 capacity up to one inch. .875 or 1 inch require special collets. Specification:. 24 volt. 25-250 RPM variable. 3/8 16 T nuts Mount in X or Y orientations. All metal construction honed bore .0005 concentricity. Motor spindle height 4.6 or 5.39 inch center
Comes with 10 piece ER3 collet set in a case
Power supply 110/220 V input 3- 24 v dc output. Build for our modern tool grinders and appropriate for older grinders like the MG-30, HDT-30, and CM-01 as well.