Manufacturer: |
BendPak
|
Supplier number: | 5105570 |
UPC: | 849672000891 |
Technical specs:
- UL, CSA, ASME certified
- Extra-quiet, low-RPM pump
- 5 HP energy‐efficient motor
- Pressure switch ensures efficient operation at all times with no wasted energy
- Cast‐iron pump and heads are more stable under heavy workloads and do not warp from heat like aluminum cylinders with pressed‐in sleeves
- Cast‐iron Elite pump features simple splash lubrication for total reliability and a finned cylinder configuration that provides 360° cooling
- Dual drive belts require less belt tension resulting in less load on pump bearings, longer belt life and low vibration
- Fully‐enclosed belt guard
- Anti-vibration pads included
- Large surface area and cooling fins on cylinders and forced‐air after-cooler provides efficient heat dissipation for lower operating temperatures and dryer air. Compressor runs cooler, oil life is extended and maintenance is reduced
- Precision honed cylinders increase efficiency and oil control
- Oversized ductile iron crankshaft provides extra strength and longer wear
- Tapered roller main bearings provide full contact and support of the crankshaft and needle‐type piston pin bearings properly distribute bearing loads
- Precision balanced flywheel has forced‐air fan blades for optimum compressor cooling and life
- Magnetic starter provides thermal overload protection and minimizes start loads providing long life and trouble‐free operation
- ASME-rated safety valve protects the compressor from overpressure and safeguards the operator
- Balanced flywheel and counterbalanced crankshaft provides vibration‐free operation
- Readily accessible disc‐valves do not require disassembly of compressor piping for easy accessibility and reduced maintenance cost and downtime
- Corrosion resistant tubing for coolers, separators and valves for longer life and reduced maintenance
- High‐density, die‐cast aluminum alloy rods minimize reciprocating weight
- Rugged cast iron oil reservoir has convenient sight gauge glass, large oil drain and convenient fill cap
- Automatic pressure switch provides auto start and stop
- Integrated pressure unloader valves are built into the intake valve assembly on the compressor head, reducing internal pump heat from initial start‐up compression
- Pressure gauge with service valve
- Oversize replaceable air filter
- Motor
- Horsepower: 5 HP
- RPM: 1,750 RPM
- Voltage: 208-230 Volt AC
- Phase: 1-Phase
- Hertz: 60 Hz
- Magnetic Starter: No
- Amp Draw: 24
- Recommended Breaker: 40 Amp Breaker
- Noise: 72 dBA
- Pump
- Style: 2-Stage / 2-Piston / Vertical
- Pump RPM: 625 RPM
- Material: Solid Cast Iron
- Duty Cycle: Continuous
- CFM: 17 CFM
- CFM Rated @: 175 PSI
- Max PSI: 175 PSI
- Oil Sight Glass: Yes
- Pump Type: Two-Stage
- Pump Drive: Belt Drive
- Oil Type: Oil Lubricated
- Oil System: Full Pressure Lubrication
- Tank
- Orientation: Vertical
- Size: 80 gallon
- Outlet: 3/4" Fitting
- Electronic Drain Valve: Yes
- Certification: UL, CSA, ASME
- Dimensions
- Width: 24
- Depth: 71
- Height: 34
- Weight
- Shipping
- Weight: 676-lbs. (306.6 kg)
- Dimensions: 44'' x 40'' x 75'' (1,117 mm x 1,016 mm x 1,905 mm)
- WARNING: California Prop 65
BendPak Large 3" Pipe Bending Die Package, 6 pieces, 5105570, 849672000891 Important: The...more
BendPak Large 3" Pipe Bending Die Package, 6 pieces, 5105570, 849672000891
Important: The vehicles shown in the images are for illustration purposes only. The images may not be an exact representation of the product.
Optional 300-1 Large 3" Die Package, 6-Piece, Purchased with Pipe Bender - Optional 6-piece, 3" die package extends the bending capabilities of your BendPak pipe bender.
Important: The vehicles shown in the images are for illustration purposes only. The images may not be an exact representation of the product.
Optional 300-1 Large 3" Die Package, 6-Piece, Purchased with Pipe Bender - Optional 6-piece, 3" die package extends the bending capabilities of your BendPak pipe bender.
- Made from precision-machined solid steel
- Step-cut manufacturing process contains larger-sized tubing
- Gives BendPak benders the ability to bend 3" OD tubing
- Gives BendPak benders the ability to bend 3" OD tubing
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
BP-235
You will receive your personal $15 voucher with your order confirmation
Spend over $200 and get a $15 voucher for your next order
$15
$1,275.00 *
$2,601.00 *
(50.98% Saved)
Free shipping!
Delivery time 5-7 business days
Secure payment
BendPak Large 3" Pipe Bending Die Package, 6 pieces, 5105570
Add this item and enjoy fast shipping
Popular product! About people already have it in their shopping cart
Free SHIPPING - Directly from the manufacturer!
Top seller in the store!
Proven product
Top international brands already trust us!
Secure shopping
- Free shipping from $50
- Fast delivery
- Your personal buyer protection
Manufacturer: |
BendPak
|
Supplier number: | 5105570 |
UPC: | 849672000891 |
Technical specs:
- UL, CSA, ASME certified
- Extra-quiet, low-RPM pump
- 5 HP energy‐efficient motor
- Pressure switch ensures efficient operation at all times with no wasted energy
- Cast‐iron pump and heads are more stable under heavy workloads and do not warp from heat like aluminum cylinders with pressed‐in sleeves
- Cast‐iron Elite pump features simple splash lubrication for total reliability and a finned cylinder configuration that provides 360° cooling
- Dual drive belts require less belt tension resulting in less load on pump bearings, longer belt life and low vibration
- Fully‐enclosed belt guard
- Anti-vibration pads included
- Large surface area and cooling fins on cylinders and forced‐air after-cooler provides efficient heat dissipation for lower operating temperatures and dryer air. Compressor runs cooler, oil life is extended and maintenance is reduced
- Precision honed cylinders increase efficiency and oil control
- Oversized ductile iron crankshaft provides extra strength and longer wear
- Tapered roller main bearings provide full contact and support of the crankshaft and needle‐type piston pin bearings properly distribute bearing loads
- Precision balanced flywheel has forced‐air fan blades for optimum compressor cooling and life
- Magnetic starter provides thermal overload protection and minimizes start loads providing long life and trouble‐free operation
- ASME-rated safety valve protects the compressor from overpressure and safeguards the operator
- Balanced flywheel and counterbalanced crankshaft provides vibration‐free operation
- Readily accessible disc‐valves do not require disassembly of compressor piping for easy accessibility and reduced maintenance cost and downtime
- Corrosion resistant tubing for coolers, separators and valves for longer life and reduced maintenance
- High‐density, die‐cast aluminum alloy rods minimize reciprocating weight
- Rugged cast iron oil reservoir has convenient sight gauge glass, large oil drain and convenient fill cap
- Automatic pressure switch provides auto start and stop
- Integrated pressure unloader valves are built into the intake valve assembly on the compressor head, reducing internal pump heat from initial start‐up compression
- Pressure gauge with service valve
- Oversize replaceable air filter
- Motor
- Horsepower: 5 HP
- RPM: 1,750 RPM
- Voltage: 208-230 Volt AC
- Phase: 1-Phase
- Hertz: 60 Hz
- Magnetic Starter: No
- Amp Draw: 24
- Recommended Breaker: 40 Amp Breaker
- Noise: 72 dBA
- Pump
- Style: 2-Stage / 2-Piston / Vertical
- Pump RPM: 625 RPM
- Material: Solid Cast Iron
- Duty Cycle: Continuous
- CFM: 17 CFM
- CFM Rated @: 175 PSI
- Max PSI: 175 PSI
- Oil Sight Glass: Yes
- Pump Type: Two-Stage
- Pump Drive: Belt Drive
- Oil Type: Oil Lubricated
- Oil System: Full Pressure Lubrication
- Tank
- Orientation: Vertical
- Size: 80 gallon
- Outlet: 3/4" Fitting
- Electronic Drain Valve: Yes
- Certification: UL, CSA, ASME
- Dimensions
- Width: 24
- Depth: 71
- Height: 34
- Weight
- Shipping
- Weight: 676-lbs. (306.6 kg)
- Dimensions: 44'' x 40'' x 75'' (1,117 mm x 1,016 mm x 1,905 mm)
- WARNING: California Prop 65
BendPak Large 3" Pipe Bending Die Package, 6 pieces, 5105570, 849672000891 Important: The...more
BendPak Large 3" Pipe Bending Die Package, 6 pieces, 5105570, 849672000891
Important: The vehicles shown in the images are for illustration purposes only. The images may not be an exact representation of the product.
Optional 300-1 Large 3" Die Package, 6-Piece, Purchased with Pipe Bender - Optional 6-piece, 3" die package extends the bending capabilities of your BendPak pipe bender.
Important: The vehicles shown in the images are for illustration purposes only. The images may not be an exact representation of the product.
Optional 300-1 Large 3" Die Package, 6-Piece, Purchased with Pipe Bender - Optional 6-piece, 3" die package extends the bending capabilities of your BendPak pipe bender.
- Made from precision-machined solid steel
- Step-cut manufacturing process contains larger-sized tubing
- Gives BendPak benders the ability to bend 3" OD tubing
- Gives BendPak benders the ability to bend 3" OD tubing
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
Questions about the article
Your question:
Personal data:
Continue shopping
5105570