Manufacturer: |
BendPak
|
Supplier number: | 5175516 |
UPC: | 849672001263 |
Technical specs:
- 7,000-lb. maximum lifting capacity
- Wide drive-thru with tall lifting height and short runways
- Runways include rail-kit for optional accessories
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
- Features heavy-duty 3/8" aircraft cable
- Rugged 1.25" roller axles
- Multi-position safety locks in each column
- Adjustable lock ladders
- Ramps feature non-skid surface
- Push-button pneumatic safety release
- Optional 4,500-lb. capacity rolling jack available (Model RJ-45)
- Critical Clearance Dimensions With Lift Parked On Lock
- Capacity
- Lifting Capacity*: 7000
- *Max Capacity / Front Axle: 3500
- *Max Capacity / Rear Axle: 3500
- Rise
- A- Min. Runway Height: 4.5
- B- Max. Rise: 82
- C- Max. Lifting Height: 86.5
- Time to Full Rise: 35 seconds
- Outside Dimensions
- D- Overall Width: 110.25
- E- Outside Length: 174
- F- Overall Length: 200
- G- Height of Columns: 100
- Inside Dimensions
- H- Width Between Columns: 100.25
- I- Drive-Thru Clearance: 86.5
- Runways
- J- Runway Width: 19
- K- Length of Runways: 164
- L- Width Between Runways: 37.5or44.375
- M- Runway Centerline: 56.5or63.375
- N- Outside Edge of Runways: 75.5or82.375
- Minimum Wheelbase
- Rated Capacity: 115
- 75% Capacity: 100
- 50% Capacity: 85
- 25% Capacity: 70
- Locking
- Locking Positions: 15
- Lock Spacing: Every 4" (102 mm)
- Power Unit
- Motor: 220 VAC / 60 Hz / 1 Ph
- Noise: 45 dB
- Shipping
- Weight: 1,734-lbs. (786 kg)
- Dimensions: 164'' x 22'' x 35'' (4,165 mm x 559 mm x 889 mm)
- Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
- Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
- WARNING: California Prop 65
BendPak Four-Post Lift HD-7PXW, Super-Tall Rise, 7,000-lb. Capacity, 5175516, 849672001263...more
BendPak Four-Post Lift HD-7PXW, Super-Tall Rise, 7,000-lb. Capacity, 5175516, 849672001263
Important: The vehicles shown in the images are for illustration purposes only. The images may not be an exact representation of the product.
The HD-7PXW is a literal giant. This four-post lift is also a magnificent display platform and will effortlessly lift up to 7,000 lbs. over 12 feet into the air! It's perfect for stacking taller vehicles and getting them seen!
Amazingly Tall Four-Post Lift
The HD-7PXW four-post lift has a 7,000-lb. lift capacity and 188" long runways to accommodate a variety of vehicle types and wheelbases.
Same great benefits as other lifts
The HD-7PXW has all the same safety and convenience features as otherBendPak four-post lifts. A one-touch pneumatic safety release instantly releases all locks simultaneously, and the lift's lone hydraulic cylinder is neatly tucked under the power-side runway. There's simply no better-looking and higher-reaching car lift on the market than the HD-7PXW.
Important: The vehicles shown in the images are for illustration purposes only. The images may not be an exact representation of the product.
The HD-7PXW is a literal giant. This four-post lift is also a magnificent display platform and will effortlessly lift up to 7,000 lbs. over 12 feet into the air! It's perfect for stacking taller vehicles and getting them seen!
Amazingly Tall Four-Post Lift
The HD-7PXW four-post lift has a 7,000-lb. lift capacity and 188" long runways to accommodate a variety of vehicle types and wheelbases.
Same great benefits as other lifts
The HD-7PXW has all the same safety and convenience features as otherBendPak four-post lifts. A one-touch pneumatic safety release instantly releases all locks simultaneously, and the lift's lone hydraulic cylinder is neatly tucked under the power-side runway. There's simply no better-looking and higher-reaching car lift on the market than the HD-7PXW.
- 7,000-lb. maximum lifting capacity
- Super tall rise of delivers 12-feet of lifting height
- Electric / hydraulic power system
- Electric / hydraulic power system
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
BP-159
You will receive your personal $15 voucher with your order confirmation
Spend over $200 and get a $15 voucher for your next order
$15
$7,995.00 *
$17,389.13 *
(54.02% Saved)
Free shipping!
Delivery time 5-7 business days
Lift Type:
Secure payment
BendPak Four-Post Lift HD-7PXW, Super-Tall Rise, 7,000-lb. Capacity, 5175516
Add this item and enjoy fast shipping
Popular product! About people already have it in their shopping cart
Free SHIPPING - Directly from the manufacturer!
Top seller in the store!
Also order the matching accessories
BendPak Plastic Drip Trays fits HD-7 and HD-9 Series Lifts, Set of 2, 5700301
BendPak |
5700301
-54%
Content
2 Unit
($67.00 * / 1 Unit)
$289.44
*
$134.00
*
Show more accessories ()
Hide other accessories
Proven product
Top international brands already trust us!
Manufacturer: |
BendPak
|
Supplier number: | 5175516 |
UPC: | 849672001263 |
Technical specs:
- 7,000-lb. maximum lifting capacity
- Wide drive-thru with tall lifting height and short runways
- Runways include rail-kit for optional accessories
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
- Features heavy-duty 3/8" aircraft cable
- Rugged 1.25" roller axles
- Multi-position safety locks in each column
- Adjustable lock ladders
- Ramps feature non-skid surface
- Push-button pneumatic safety release
- Optional 4,500-lb. capacity rolling jack available (Model RJ-45)
- Critical Clearance Dimensions With Lift Parked On Lock
- Capacity
- Lifting Capacity*: 7000
- *Max Capacity / Front Axle: 3500
- *Max Capacity / Rear Axle: 3500
- Rise
- A- Min. Runway Height: 4.5
- B- Max. Rise: 82
- C- Max. Lifting Height: 86.5
- Time to Full Rise: 35 seconds
- Outside Dimensions
- D- Overall Width: 110.25
- E- Outside Length: 174
- F- Overall Length: 200
- G- Height of Columns: 100
- Inside Dimensions
- H- Width Between Columns: 100.25
- I- Drive-Thru Clearance: 86.5
- Runways
- J- Runway Width: 19
- K- Length of Runways: 164
- L- Width Between Runways: 37.5or44.375
- M- Runway Centerline: 56.5or63.375
- N- Outside Edge of Runways: 75.5or82.375
- Minimum Wheelbase
- Rated Capacity: 115
- 75% Capacity: 100
- 50% Capacity: 85
- 25% Capacity: 70
- Locking
- Locking Positions: 15
- Lock Spacing: Every 4" (102 mm)
- Power Unit
- Motor: 220 VAC / 60 Hz / 1 Ph
- Noise: 45 dB
- Shipping
- Weight: 1,734-lbs. (786 kg)
- Dimensions: 164'' x 22'' x 35'' (4,165 mm x 559 mm x 889 mm)
- Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
- Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
- WARNING: California Prop 65
BendPak Four-Post Lift HD-7PXW, Super-Tall Rise, 7,000-lb. Capacity, 5175516, 849672001263...more
BendPak Four-Post Lift HD-7PXW, Super-Tall Rise, 7,000-lb. Capacity, 5175516, 849672001263
Important: The vehicles shown in the images are for illustration purposes only. The images may not be an exact representation of the product.
The HD-7PXW is a literal giant. This four-post lift is also a magnificent display platform and will effortlessly lift up to 7,000 lbs. over 12 feet into the air! It's perfect for stacking taller vehicles and getting them seen!
Amazingly Tall Four-Post Lift
The HD-7PXW four-post lift has a 7,000-lb. lift capacity and 188" long runways to accommodate a variety of vehicle types and wheelbases.
Same great benefits as other lifts
The HD-7PXW has all the same safety and convenience features as otherBendPak four-post lifts. A one-touch pneumatic safety release instantly releases all locks simultaneously, and the lift's lone hydraulic cylinder is neatly tucked under the power-side runway. There's simply no better-looking and higher-reaching car lift on the market than the HD-7PXW.
Important: The vehicles shown in the images are for illustration purposes only. The images may not be an exact representation of the product.
The HD-7PXW is a literal giant. This four-post lift is also a magnificent display platform and will effortlessly lift up to 7,000 lbs. over 12 feet into the air! It's perfect for stacking taller vehicles and getting them seen!
Amazingly Tall Four-Post Lift
The HD-7PXW four-post lift has a 7,000-lb. lift capacity and 188" long runways to accommodate a variety of vehicle types and wheelbases.
Same great benefits as other lifts
The HD-7PXW has all the same safety and convenience features as otherBendPak four-post lifts. A one-touch pneumatic safety release instantly releases all locks simultaneously, and the lift's lone hydraulic cylinder is neatly tucked under the power-side runway. There's simply no better-looking and higher-reaching car lift on the market than the HD-7PXW.
- 7,000-lb. maximum lifting capacity
- Super tall rise of delivers 12-feet of lifting height
- Electric / hydraulic power system
- Electric / hydraulic power system
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
Also order the matching accessories
BendPak Plastic Drip Trays fits HD-7 and HD-9 Series Lifts, Set of 2, 5700301
BendPak |
5700301
-54%
Content
2 Unit
($67.00 * / 1 Unit)
$289.44
*
$134.00
*
Show more accessories ()
Hide other accessories
Questions about the article
Your question:
Personal data:
Continue shopping
5175516