Manufacturer: |
BendPak
|
Supplier number: | 5175178 |
UPC: | 849672001959 |
Technical specs:
- 40,000-lb. lifting capacity
- Supersized 12" diameter cable sheaves
- Galvanized lifting cables
- Grease nipples
- Single hydraulic under-runway cylinder
- Integrated flow restrictor
- Durable powder coat
- Spring-loaded safety locks
- Second lock system on constant guard
- Fully enclosed lifting cables
- Multiple adjustable height locking positions
- Maintenance-free electric hydraulic power system
- Conveniently positioned operator controls
- 12" x 12" base plates
- Optional rolling jacks
- Capacity
- Lifting Capacity*: 40000
- *Max Capacity / Front Axle: 20000
- *Max Capacity / Rear Axle: 20000
- Rise
- A- Min. Runway Height: 9.5
- B- Max. Rise: 61.25
- C- Max. Lifting Height: 69.5
- Time to Full Rise: 75 seconds
- Outside Dimensions
- D- Overall Width: 153.5
- E- Outside Length: 257
- F- Overall Length: 313.75
- G- Height of Columns: 91.25
- Inside Dimensions
- H- Width Between Columns: 133.5
- I- Drive-Thru Clearance: 109
- Runways
- J- Runway Width: 28
- K- Length of Runways: 244.5
- L- Width Between Runways: 41
- M- Runway Centerline: 69
- N- Outside Edge of Runways: 97
- Minimum Wheelbase
- Rated Capacity: 185
- 75% Capacity: 160
- 50% Capacity: 135
- 25% Capacity: 110
- Locking
- Locking Positions: 13
- Lock Spacing: Every 4" / 100 mm
- Power Unit
- Motor: 220 VAC / 60 Hz. 1Ph.
- Noise: 45 dB
- Shipping
- Weight: 6,748-lbs. (3,060 kg)
- Dimensions: 265'' x 31'' x 36'' (6,731 mm x 787 mm x 914 mm)
- Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
- Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
- WARNING: California Prop 65
BendPak Four-Post Extended Lift HDS-40X, 40,000-lb. Capacity, 5175178, 849672001959 Important:...more
BendPak Four-Post Extended Lift HDS-40X, 40,000-lb. Capacity, 5175178, 849672001959
Important: The vehicles shown in the images are for illustration purposes only. The images may not be an exact representation of the product.
The HDS-40X is BendPak's heaviest-duty, extended-length truck lift. That makes it the most powerful offering in our arsenal. With a rugged design, anyone working on massive commercial vehicles should consider this mighty machine.
BendPak's Strongest and Longest Beast of Burden
40,000 lbs. take a lot of muscle to lift, and many vehicles of this caliber are longer than our standard-length series of four-post lifts can accommodate. If you want to be prepared for the longest and heaviest vehicles on the road, you need BendPak's most impressive offering—and this is undoubtedly it. With runways that measure in at a whopping 310", the HDS-40X is the heaviest-duty extended-length car lift we make. Slap a bus on it and get to work, no sweat.
The power of this lift is no light matter. Military contractors, government entities on all levels and large commercial truck repair companies have all sought this lift out, knowing there's nothing they can throw at it that it can't handle. Far from being a hobby lift, this industrial-grade powerhouse is only going to fit in serious-minded commercial maintenance spaces. You'll need a big bay with high ceilings, and if you have that, the HDS-40X doubles as a parking lift and ultra-safe storage space.
Super-long runways
Super-duty vehicles need a clean approach and a wide runway to safely board a lift. At 28" wide, these runways accommodate tires of virtually any diameter and width.
Dual-hub cable sheaves
BendPak cable sheaves are made to dominate every lifting application, however big or small. 12" diameter sheave bodies and 4" axles make them far more likely to last the lifespan of your lift because of their sheer size and quality of construction.
Large base plates
Truck lift base plates are made super-wide, which makes sense considering the size of the vehicles you're putting on the runways. 12 x 12 plate dimensions are extremely secure for maximum stability and lifting longevity.
Spring-loaded safety locks
13 lock positions offer up to 60" of rise for comfortable undercarriage access. All locks automatically engage during rise and disengage at the touch of a button. Just one look at the lock sizes will inspire confidence that this lift is safer than any you've ever seen.
Secondary lock system
The primary locks are more than enough security, but we don't leave a single, tiny thing to chance. So, we include a backup cable-slack detection system that captures loose cables immediately if slack develops. This system makes it entirely safe to remedy any issues without risking uneven platforms.
Rolling bridge jacks
Need to perform wheel service on your fleet? Of course you do. Pick up a pair of RBJ25000 bridge jacks and start working. Together, two jacks will lift a vehicle up to 50,000 lbs., but keep in mind the HDS-40X has a 40,000-lb. limit. The extra 10K is not just peace-of-mind, but a practical consideration since the front half of most trucks (where the engine and transmission rest) is likely to be heavier than the back.
Important: The vehicles shown in the images are for illustration purposes only. The images may not be an exact representation of the product.
The HDS-40X is BendPak's heaviest-duty, extended-length truck lift. That makes it the most powerful offering in our arsenal. With a rugged design, anyone working on massive commercial vehicles should consider this mighty machine.
BendPak's Strongest and Longest Beast of Burden
40,000 lbs. take a lot of muscle to lift, and many vehicles of this caliber are longer than our standard-length series of four-post lifts can accommodate. If you want to be prepared for the longest and heaviest vehicles on the road, you need BendPak's most impressive offering—and this is undoubtedly it. With runways that measure in at a whopping 310", the HDS-40X is the heaviest-duty extended-length car lift we make. Slap a bus on it and get to work, no sweat.
The power of this lift is no light matter. Military contractors, government entities on all levels and large commercial truck repair companies have all sought this lift out, knowing there's nothing they can throw at it that it can't handle. Far from being a hobby lift, this industrial-grade powerhouse is only going to fit in serious-minded commercial maintenance spaces. You'll need a big bay with high ceilings, and if you have that, the HDS-40X doubles as a parking lift and ultra-safe storage space.
Super-long runways
Super-duty vehicles need a clean approach and a wide runway to safely board a lift. At 28" wide, these runways accommodate tires of virtually any diameter and width.
Dual-hub cable sheaves
BendPak cable sheaves are made to dominate every lifting application, however big or small. 12" diameter sheave bodies and 4" axles make them far more likely to last the lifespan of your lift because of their sheer size and quality of construction.
Large base plates
Truck lift base plates are made super-wide, which makes sense considering the size of the vehicles you're putting on the runways. 12 x 12 plate dimensions are extremely secure for maximum stability and lifting longevity.
Spring-loaded safety locks
13 lock positions offer up to 60" of rise for comfortable undercarriage access. All locks automatically engage during rise and disengage at the touch of a button. Just one look at the lock sizes will inspire confidence that this lift is safer than any you've ever seen.
Secondary lock system
The primary locks are more than enough security, but we don't leave a single, tiny thing to chance. So, we include a backup cable-slack detection system that captures loose cables immediately if slack develops. This system makes it entirely safe to remedy any issues without risking uneven platforms.
Rolling bridge jacks
Need to perform wheel service on your fleet? Of course you do. Pick up a pair of RBJ25000 bridge jacks and start working. Together, two jacks will lift a vehicle up to 50,000 lbs., but keep in mind the HDS-40X has a 40,000-lb. limit. The extra 10K is not just peace-of-mind, but a practical consideration since the front half of most trucks (where the engine and transmission rest) is likely to be heavier than the back.
- 40,000-lb. lifting capacity
- Supersized 12" diameter cable sheaves
- Galvanized lifting cables
- Galvanized lifting cables
- Grease nipples
- Single hydraulic under-runway cylinder
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
BP-1
You will receive your personal $15 voucher with your order confirmation
Spend over $200 and get a $15 voucher for your next order
$15
$34,595.00 *
$70,573.80 *
(50.98% Saved)
Free shipping!
Delivery time 5-7 business days
Secure payment
BendPak Four-Post Extended Lift HDS-40X, 40,000-lb. Capacity, 5175178
Add this item and enjoy fast shipping
Popular product! About people already have it in their shopping cart
Free SHIPPING - Directly from the manufacturer!
Top seller in the store!
Also order the matching accessories
BendPak 48" Steel Approach Ramps, fits HDS-35 & HDS-40 Series Lifts, Pair, 5210325
BendPak |
5210325
-53%
Content
1 Pair
$2,556.00
*
$1,200.00
*
BendPak Air-Electric Workstation WSA-100, fits HD/HDS-18/27/35/40 Four-Post Lifts, 5210436
BendPak |
5210436
-51%
$738.48
*
$362.00
*
Show more accessories ()
Hide other accessories
Proven product
Top international brands already trust us!
Manufacturer: |
BendPak
|
Supplier number: | 5175178 |
UPC: | 849672001959 |
Technical specs:
- 40,000-lb. lifting capacity
- Supersized 12" diameter cable sheaves
- Galvanized lifting cables
- Grease nipples
- Single hydraulic under-runway cylinder
- Integrated flow restrictor
- Durable powder coat
- Spring-loaded safety locks
- Second lock system on constant guard
- Fully enclosed lifting cables
- Multiple adjustable height locking positions
- Maintenance-free electric hydraulic power system
- Conveniently positioned operator controls
- 12" x 12" base plates
- Optional rolling jacks
- Capacity
- Lifting Capacity*: 40000
- *Max Capacity / Front Axle: 20000
- *Max Capacity / Rear Axle: 20000
- Rise
- A- Min. Runway Height: 9.5
- B- Max. Rise: 61.25
- C- Max. Lifting Height: 69.5
- Time to Full Rise: 75 seconds
- Outside Dimensions
- D- Overall Width: 153.5
- E- Outside Length: 257
- F- Overall Length: 313.75
- G- Height of Columns: 91.25
- Inside Dimensions
- H- Width Between Columns: 133.5
- I- Drive-Thru Clearance: 109
- Runways
- J- Runway Width: 28
- K- Length of Runways: 244.5
- L- Width Between Runways: 41
- M- Runway Centerline: 69
- N- Outside Edge of Runways: 97
- Minimum Wheelbase
- Rated Capacity: 185
- 75% Capacity: 160
- 50% Capacity: 135
- 25% Capacity: 110
- Locking
- Locking Positions: 13
- Lock Spacing: Every 4" / 100 mm
- Power Unit
- Motor: 220 VAC / 60 Hz. 1Ph.
- Noise: 45 dB
- Shipping
- Weight: 6,748-lbs. (3,060 kg)
- Dimensions: 265'' x 31'' x 36'' (6,731 mm x 787 mm x 914 mm)
- Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
- Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
- WARNING: California Prop 65
BendPak Four-Post Extended Lift HDS-40X, 40,000-lb. Capacity, 5175178, 849672001959 Important:...more
BendPak Four-Post Extended Lift HDS-40X, 40,000-lb. Capacity, 5175178, 849672001959
Important: The vehicles shown in the images are for illustration purposes only. The images may not be an exact representation of the product.
The HDS-40X is BendPak's heaviest-duty, extended-length truck lift. That makes it the most powerful offering in our arsenal. With a rugged design, anyone working on massive commercial vehicles should consider this mighty machine.
BendPak's Strongest and Longest Beast of Burden
40,000 lbs. take a lot of muscle to lift, and many vehicles of this caliber are longer than our standard-length series of four-post lifts can accommodate. If you want to be prepared for the longest and heaviest vehicles on the road, you need BendPak's most impressive offering—and this is undoubtedly it. With runways that measure in at a whopping 310", the HDS-40X is the heaviest-duty extended-length car lift we make. Slap a bus on it and get to work, no sweat.
The power of this lift is no light matter. Military contractors, government entities on all levels and large commercial truck repair companies have all sought this lift out, knowing there's nothing they can throw at it that it can't handle. Far from being a hobby lift, this industrial-grade powerhouse is only going to fit in serious-minded commercial maintenance spaces. You'll need a big bay with high ceilings, and if you have that, the HDS-40X doubles as a parking lift and ultra-safe storage space.
Super-long runways
Super-duty vehicles need a clean approach and a wide runway to safely board a lift. At 28" wide, these runways accommodate tires of virtually any diameter and width.
Dual-hub cable sheaves
BendPak cable sheaves are made to dominate every lifting application, however big or small. 12" diameter sheave bodies and 4" axles make them far more likely to last the lifespan of your lift because of their sheer size and quality of construction.
Large base plates
Truck lift base plates are made super-wide, which makes sense considering the size of the vehicles you're putting on the runways. 12 x 12 plate dimensions are extremely secure for maximum stability and lifting longevity.
Spring-loaded safety locks
13 lock positions offer up to 60" of rise for comfortable undercarriage access. All locks automatically engage during rise and disengage at the touch of a button. Just one look at the lock sizes will inspire confidence that this lift is safer than any you've ever seen.
Secondary lock system
The primary locks are more than enough security, but we don't leave a single, tiny thing to chance. So, we include a backup cable-slack detection system that captures loose cables immediately if slack develops. This system makes it entirely safe to remedy any issues without risking uneven platforms.
Rolling bridge jacks
Need to perform wheel service on your fleet? Of course you do. Pick up a pair of RBJ25000 bridge jacks and start working. Together, two jacks will lift a vehicle up to 50,000 lbs., but keep in mind the HDS-40X has a 40,000-lb. limit. The extra 10K is not just peace-of-mind, but a practical consideration since the front half of most trucks (where the engine and transmission rest) is likely to be heavier than the back.
Important: The vehicles shown in the images are for illustration purposes only. The images may not be an exact representation of the product.
The HDS-40X is BendPak's heaviest-duty, extended-length truck lift. That makes it the most powerful offering in our arsenal. With a rugged design, anyone working on massive commercial vehicles should consider this mighty machine.
BendPak's Strongest and Longest Beast of Burden
40,000 lbs. take a lot of muscle to lift, and many vehicles of this caliber are longer than our standard-length series of four-post lifts can accommodate. If you want to be prepared for the longest and heaviest vehicles on the road, you need BendPak's most impressive offering—and this is undoubtedly it. With runways that measure in at a whopping 310", the HDS-40X is the heaviest-duty extended-length car lift we make. Slap a bus on it and get to work, no sweat.
The power of this lift is no light matter. Military contractors, government entities on all levels and large commercial truck repair companies have all sought this lift out, knowing there's nothing they can throw at it that it can't handle. Far from being a hobby lift, this industrial-grade powerhouse is only going to fit in serious-minded commercial maintenance spaces. You'll need a big bay with high ceilings, and if you have that, the HDS-40X doubles as a parking lift and ultra-safe storage space.
Super-long runways
Super-duty vehicles need a clean approach and a wide runway to safely board a lift. At 28" wide, these runways accommodate tires of virtually any diameter and width.
Dual-hub cable sheaves
BendPak cable sheaves are made to dominate every lifting application, however big or small. 12" diameter sheave bodies and 4" axles make them far more likely to last the lifespan of your lift because of their sheer size and quality of construction.
Large base plates
Truck lift base plates are made super-wide, which makes sense considering the size of the vehicles you're putting on the runways. 12 x 12 plate dimensions are extremely secure for maximum stability and lifting longevity.
Spring-loaded safety locks
13 lock positions offer up to 60" of rise for comfortable undercarriage access. All locks automatically engage during rise and disengage at the touch of a button. Just one look at the lock sizes will inspire confidence that this lift is safer than any you've ever seen.
Secondary lock system
The primary locks are more than enough security, but we don't leave a single, tiny thing to chance. So, we include a backup cable-slack detection system that captures loose cables immediately if slack develops. This system makes it entirely safe to remedy any issues without risking uneven platforms.
Rolling bridge jacks
Need to perform wheel service on your fleet? Of course you do. Pick up a pair of RBJ25000 bridge jacks and start working. Together, two jacks will lift a vehicle up to 50,000 lbs., but keep in mind the HDS-40X has a 40,000-lb. limit. The extra 10K is not just peace-of-mind, but a practical consideration since the front half of most trucks (where the engine and transmission rest) is likely to be heavier than the back.
- 40,000-lb. lifting capacity
- Supersized 12" diameter cable sheaves
- Galvanized lifting cables
- Galvanized lifting cables
- Grease nipples
- Single hydraulic under-runway cylinder
Restrictions
>
WARNING: Cancer and Reproductive Harm. For more information go to: www.P65Warnings.ca.gov
Hazardous material
Also order the matching accessories
BendPak 48" Steel Approach Ramps, fits HDS-35 & HDS-40 Series Lifts, Pair, 5210325
BendPak |
5210325
-53%
Content
1 Pair
$2,556.00
*
$1,200.00
*
BendPak Air-Electric Workstation WSA-100, fits HD/HDS-18/27/35/40 Four-Post Lifts, 5210436
BendPak |
5210436
-51%
$738.48
*
$362.00
*
Show more accessories ()
Hide other accessories
Questions about the article
Your question:
Personal data:
Continue shopping
5175178